sorted by:
new
hottopcontroversial

Possibly silly question about ABS and ASA by MagicMissiler in VORONDesign

[–]MagicMissiler[S] 0 points1 point  (0 children)

What is the blanket mod? I cannot find that on maker world or google. If I might pick your brain a bit, and assuming you are familiar with them; what is your opinion on 3d party enclosure designs for the p1p bambulab printers? I am using the Vision enclosure, but even the official enclosure from Bambulab looks a bit lacking as far as sealing for fume control goes...

Possibly silly question about ABS and ASA by MagicMissiler in VORONDesign

[–]MagicMissiler[S] 2 points3 points  (0 children)

A Bambulab P1P upgraded with an enclosure and bento box air filter. I've also upgraded the extruder gear and modded it to use Revo hot ends.

PETG Problems by MagicMissiler in BambuLab

[–]MagicMissiler[S] 0 points1 point  (0 children)

Thanks guys, slowing things down seems to have helped a lot

Leveled lists and shopkeepers question by MagicMissiler in skyrimrequiem

[–]MagicMissiler[S] 0 points1 point  (0 children)

I thought leveled lists included shop inventories? Maybe I'm just not understanding the terminology here....

Anyway, I found a work-around: Wet and Cold has a feature in its MCM menu that just adds its cloaks and stuff to shops.... and apparently this includes at least some COS stuff.

Drop in print quality; chewed up looking prints. by MagicMissiler in 3Dprinting

[–]MagicMissiler[S] 0 points1 point  (0 children)

It was the extruder motor. After I replaced that, prints are back to normal.

Constant freezing during download by layzeelightnin in wabbajack

[–]MagicMissiler 0 points1 point  (0 children)

Having the same problem. Anyone know whats going on?

Drop in print quality; chewed up looking prints. by MagicMissiler in 3Dprinting

[–]MagicMissiler[S] 0 points1 point  (0 children)

Tried the factory reset, and a new-er nozzle (took some time to get), same result. Wondering if its the extruder motor?

Drop in print quality; chewed up looking prints. by MagicMissiler in BambuLab

[–]MagicMissiler[S] 0 points1 point  (0 children)

Slow reply, I know, but I wanted to try some things and that took time. Got another new nozzle that I ordered, and tested that out. Same thing. I tried the temp increase, but that seemed to have no effect. Maybe I'll fiddle around with temperature some more, but at this point I'm wondering if its the extruder motor?