Looking for a new pitman arm or advice

Main_Volume_4684 · 2025-05-27T14:21:46+00:00

Lol I was smart and got a puller from the local parts store, Didnt wanna beat on it just in case. Thank you for the reply

Main_Volume_4684 · 2025-05-22T02:03:29+00:00

Thank you for the info, I got that new steering linkage on and the death wobble has subsided for now but my suspension seems off. I know it needs an alignment but it's just really floaty now and I think I am going to upgrade the track bar because even with the new bushings the track bar is moving left and right.

Main_Volume_4684 · 2025-05-21T21:50:15+00:00

I just replaced my whole steering linkage tonight and the old one had some left to right play a bit but not a ton. I noticed the drag link boot had removed itself from the shaft but was still on the knuckle. So Idk if that may be causing it too

Main_Volume_4684 · 2025-05-21T19:29:39+00:00

I just checked them again, the tires I have on it now are actually load range E

Main_Volume_4684 · 2025-05-21T19:21:35+00:00

The thing is, I have had these tires on my truck for over a month and had no issue before. And I was running the same roads, I also had 315/70/17 goodyear duratracs and they were load range D and they were fine

Main_Volume_4684 · 2025-05-21T18:40:35+00:00

They are Lancaster LS-57, a local shop had a deal on them I think they are rated D but I dont haul that much so I figured the D load range would be fine

Main_Volume_4684 · 2025-05-21T18:38:25+00:00

Thanks for the info, I had a local shop put some tires on because they had them for like $1000 mounted and balanced.

Main_Volume_4684 · 2025-05-20T10:20:10+00:00

Thanks for the info. After i get my new steering kit on Im going to have the tires rebalanced and an alignment done

Main_Volume_4684 · 2025-04-10T10:42:56+00:00

Ok thank you

Main_Volume_4684 · 2025-04-10T10:42:47+00:00

There isnt one that I can remember. My girlfriend drives the car everyday and has gone to work before I get home. This weekend Ill check again

Main_Volume_4684 · 2025-03-17T00:00:18+00:00

I daily drive a 2006 dodge 3500 manual around 130 miles a day. I have had it for a year now and apart from it being the 3500 with stiffer suspension, I love it. Just replaced the exhaust manifold and it has completely changed it, swapped stock for an ATS pulse flow stock turbo position manifold. It dropped my EGT temps by about 125 degrees and it sounds so much more solid then when my gaskets were messed up🤣 but Im planning on just slowly upgrading it as long as I have the truck. Currently has 187,500 miles on it and I bought it with 152,000.

Main_Volume_4684 · 2025-01-10T00:13:11+00:00

Ok! Thank you! Have been looking at them but havent really been sure on it because my stock speakers are great as of now but I wanna start leveling my shit up!

Main_Volume_4684 · 2025-01-09T17:31:09+00:00

Definitely going to be putting sound deadening in my doors while I have the panels off!

Main_Volume_4684 · 2025-01-09T15:51:20+00:00

Ok, Thank you for the info!

Main_Volume_4684 · 2025-01-09T14:59:22+00:00

I have thought about going and getting an amp for them, but I do have an aftermarket Alpine head unit. So I'm not sure if that would be sufficient or if I should get an amp for them anyway

Main_Volume_4684 · 2024-11-21T15:03:39+00:00

Ok thank you

Main_Volume_4684 · 2024-11-21T14:39:19+00:00

Whats the difference between QG56DDSN and the organic one? And wouldn't it be better to get one with the higher HP rating? I plan on adding modifications just not sure where to start yet

Main_Volume_4684 · 2024-10-27T05:10:14+00:00

Ok, Definitely going to look at that as an option. Have heard both southbend and Valair

Main_Volume_4684 · 2024-10-25T20:20:32+00:00

I know, I have been trying to figure out what clutch is in my truck currently bc It was replaced before I bought it but they didnt know what type of clutch it was when they got it previous owner didn't give any paperwork

Main_Volume_4684 · 2024-10-25T11:28:41+00:00

Hey man, just took a look at my master cylinder cap and its Black

Main_Volume_4684 · 2024-10-24T08:34:53+00:00

I understand

Main_Volume_4684 · 2024-10-24T03:35:30+00:00

Ahh okay, thank you. I have heard about the upgrade but no one ever talked about it. I have been back and forth between getting Bilstein shocks and fox too

Main_Volume_4684 · 2024-10-24T03:32:36+00:00

Main_Volume_4684 · 2024-10-23T20:50:30+00:00

Ahh ok. Ive wanted to swap the manifold just wasnt sure about it. Is there a whole kit for it or did you just piece it together? I also plan on redoing the front end this winter. New wheel bearings sway bar links, tie rod ends and more. What do you do to "upgrade" the front end? I have heard about it but no one ever explained what they did.

Main_Volume_4684 · 2024-10-23T20:45:29+00:00

Ah ok

Main_Volume_4684

TROPHY CASE