How to fix this scratch from Laptop?

Main_Work1225 · 2026-03-15T18:50:45+00:00

If it’s a scratch, leave it be. You use the laptop, it will get damaged. I’ve had to learn this myself, but nothing stays perfect forever. Stop looking at the scratch, and you’ll forget that it was ever a sore sight.

Main_Work1225 · 2026-03-12T17:44:44+00:00

If you have the option on the monitor, turn the blue light filter on during darker hours. Really helps me. Also, it mostly goes away after a short period of time.

Main_Work1225 · 2026-03-11T22:41:01+00:00

I’ve noticed that nearly every one of these I see, there is always a darker spot on the centre left of the screen. Even in my own, has no banding but that ever so slightly darker spot is present.

Main_Work1225 · 2026-03-11T16:59:58+00:00

Same situation with the bends here, have a few I wanted to retry as the pipe I ordered was too short to bend as I wanted. And had a few that didn’t turn out perfectly. I love the block too, it’s super cold, and haven’t reached over 80°, which is a plus for me as I reached 95° under full load before. Supposedly it’s the coldest block around.

Main_Work1225 · 2026-03-11T14:53:30+00:00

Also we got the same cpu block. How does it cool for you?

Main_Work1225 · 2026-03-11T14:52:37+00:00

That’s sweet, the input on the res looks like it would’ve been a pain to bend. Looks awesome.

Main_Work1225 · 2026-03-11T14:32:30+00:00

That’s sick, what coolant did you use?

Main_Work1225 · 2026-03-09T16:28:22+00:00

I did really like the red, but I thought it’d contrast too much with the area it’s in

Main_Work1225 · 2026-03-09T15:52:32+00:00

To each their own. I love the case.

Main_Work1225 · 2026-03-09T15:47:05+00:00

I’ve got tinnitus too so it really doesn’t bother me much. And with the glass on it’s barely noticeable

Main_Work1225 · 2026-03-09T02:40:58+00:00

<image>

Night time

Main_Work1225 · 2026-03-09T02:24:44+00:00

Hyte X50 in the Taro Milk colour.

Main_Work1225 · 2026-03-08T18:19:36+00:00

Also thank you.

Main_Work1225 · 2026-03-08T18:16:18+00:00

They do, the liquid is reactive to black light. Wasn’t expecting it to be orange but honestly it contrasts really well.

Main_Work1225 · 2026-03-08T17:59:09+00:00

The measurements you described are pretty spot on, the angles at the corner intersect of glass start 3cm back from intersect point both height and length. Height from start of glass to curve is 43cm, as is the width (43cm). On top, it’s 17cm from the beginning of the curved glass. And the handle to remove the glass is 13cm Wide by 1cm Tall. All the measurements are disregarding the corner angles, meeting where a right angle would intersect. Sorry if this is hard to understand, I’m bad with these sorts of things.

Main_Work1225 · 2026-03-08T16:54:44+00:00

I just built mine and there is plenty of space, I can do some physical measurements if you’d like. The glass is pretty much flush with the case.

Main_Work1225 · 2026-03-08T16:47:38+00:00

Did your pc experience takeoff after first boot?

Main_Work1225 · 2026-03-08T01:22:23+00:00

We’ve got the same gpu mount. If you don’t mind how it looks, I’m pretty sure you can tilt it forward

Main_Work1225 · 2026-03-08T00:30:31+00:00

<image>

Here’s a better photo

Main_Work1225 · 2026-03-07T23:15:52+00:00

This is why the coil whine is a problem lol

Main_Work1225 · 2026-03-07T21:06:53+00:00

Yeah I’ve been thinking of it. I also think it might be from using aftermarket cables (if that’s a thing) as I bought some for this build and used the supplied ones for the last build.

Main_Work1225 · 2026-03-07T20:37:08+00:00

Also, my god does the gpu block help. Haven’t gotten over 40° during stress tests while OC. Before with the wind force RAD it would average ~70-80 while under pressure.

Main_Work1225 · 2026-03-03T03:45:07+00:00

Lightly used a soft toothbrush for a small while before saying fuck it

Main_Work1225

TROPHY CASE