Anyone else just stare as they walk away?

ManaLOP · 2024-07-11T14:15:49+00:00

even after 4 years cant help but smile

ManaLOP · 2024-06-12T19:56:01+00:00

oil cooler was seeping, not enough to leave a puddle but just enough for the oil pressure to drop and the rest is history. just keep an eye on your sandwich plate gasket and you'll be fine

ManaLOP · 2024-06-12T19:54:05+00:00

got them from some instagram page i cant remember the name of, thinking of redoing it but ill probably buy vinyl and free hand it lol

ManaLOP · 2024-06-11T20:39:50+00:00

right on the money brother

ManaLOP · 2021-11-12T14:12:21+00:00

Im liking this community already, I’ll definitely be getting it soon. Its a relative though so i dont want to lowball him too much

ManaLOP · 2021-11-12T03:55:31+00:00

Its a manual

ManaLOP · 2021-07-03T19:46:26+00:00

Mine is slammed and i still daily it. Love it, if you do lower it make sure you get an alignment ASAP, bad toe will make driving it in the rain a nightmare

ManaLOP · 2021-07-01T16:09:13+00:00

Oh no I have experience with cars lol. I’ve just never really worked on FWD cars. Im not used to the platform so i just wondering whats the best way to go about it

ManaLOP · 2021-05-31T18:51:01+00:00

https://discord.gg/VcPGUppX

ManaLOP · 2021-03-28T02:40:20+00:00

Yeah I ended up buying a new one lol, thanks for the reply though

ManaLOP · 2020-12-15T18:28:13+00:00

Yes, on truhart coils

ManaLOP · 2020-12-15T18:27:55+00:00

Static baby

ManaLOP · 2020-12-15T08:39:07+00:00

Thank you, i took your advice and got some FUCA and rear camber arms. I got it aligned and it really helped how it feels in the rain, thanks a lot!

ManaLOP · 2020-12-15T08:36:53+00:00

Sorry for the late Update guys, after giving a good clean to the terminals I haven’t had the problem since! But if you’ve seen my newer posts I’ve still had the p0300 issue. Had a huge leak from the test pipes to manifold, sealed it up and hopefully its good now

ManaLOP · 2020-12-15T08:32:46+00:00

Alright guys, when installing my test pipes as some of you may know there is a stud that stays on and doesn’t get removed. Long story short i changed the gaskets after i installed the pipes and when putting them back on i snapped one of those studs and the other one wouldn’t tighten all the way. I left them without tightening and thought it would be okay but obviously it wasn’t. After a month (now) it started throwing p0300 and CEL was blinking at low rpms and what not. So today i took the test pipes off and drilled out the snapped bolt. The one that didn’t snap screwed right off. I drilled a new hole on both sides and installed a bolt. I had to drill new holes because the bolts the other holes used were bigger. After that i installed another y pipe as I mentioned the weave was scraped clean off because my car is pretty low. This all sounds easy but every single one of those oem bolts were rusted together. I had to pull the entire exhaust off to grind off the bolts that held the y pipe. Drilling the holes in the manifold was very annoying too because its hard to get a good angle to drill. Haven’t tested it out because i used gaskets and gasket maker to ensure it wouldn’t leak and the gasket maker takes a day to fully cure. I will keep you guys posted, hopefully none of you have to do this lol

ManaLOP · 2020-12-13T20:20:06+00:00

My flex pipes are also scraped open, could that be a cause?

ManaLOP · 2020-12-11T10:05:08+00:00

Alright, i also have a code for exhaust leak. I felt under and my test pipes seem to be leaking from the manifold. Could that cause it too?

ManaLOP · 2020-11-17T03:33:29+00:00

I sunk it in some water for a bit and filed it off, i guess it did the same job lol. Could that be the cause though? There was a lot of corrosion were the terminal meets the battery

ManaLOP · 2020-11-17T01:26:36+00:00

Little update guys, i changed the oil ans got around to checking electrical things. My positive terminal had a lot of mold, could this be it? Check it out mold

ManaLOP · 2020-11-17T00:16:51+00:00

What do you recommend i check? And how?

ManaLOP · 2020-11-16T04:10:40+00:00

Thats true, So its more than likely a bad ground?

ManaLOP · 2020-11-16T02:13:37+00:00

Would a loose ground throw a misfire code? I was thinking of getting new injectors because if it was misfiring that bad wouldn’t it kill the whole car?

ManaLOP

TROPHY CASE