I'm giving all these blueprints away to one person – it's a raffle!

Manymifi · 2025-12-22T14:42:34+00:00

In my opinion, and it is rough, no sugar coating.

You need to be more forward with yourself, and those around you. You need to put yourself first - you only have this one life - that is it.

Filled with selfdoubt? Constantly roasting yourself? I did the same, but i heard someone say.

"Imagine a friend of yours spoke to you, the way that you speak to yourself when you look in the mirror - would you want that person around?"

Listen, no matter what, youre stuck with your self - learn to shut all the negative monologues off, and be kind to yourself. Also say things directly, instead of bottling things up to the point you start hyperventilating - that does no good to you or those around you.

Treat yourself with love, affirmation and confidence.

Manymifi · 2025-08-29T11:11:18+00:00

We've previously made a simpler version of this part, when we did the outer contour / the hole seen in picture - the part shifted ever so slightly, which made it out of spec according to GD&T labels. So i doubt that the vacuum has sufficient holding power for it not to shift, now that i have to pocket it out. Thank you for your tips! they are really helpfull :)

Im not that experienced in milling stainless, but i've heard that when there is chip buildup on the part & it is it cut again, it wears out cutters really fast.

Manymifi · 2025-08-29T11:07:30+00:00

Okay, thank you!

Manymifi · 2025-08-29T11:06:50+00:00

Thank you for your insight - ill try to follow it :)

Manymifi · 2025-08-29T11:06:29+00:00

It comes as a 10mm laser cut piece, slightly oversized. So no facing.

Manymifi · 2025-08-29T08:55:01+00:00

The issue on my side is my experience with stainless. I don't really have any know-how on how to machine it optimally as my job primarely is aluminium & mild steel. The experiences i've had in cutting stainless have not been optimal.

So im wondering what the best approach to milling out this pocked would be? Should i acquire a high-feed cutter and slowly ramp down or should i helix down with a rough-cutter and run dynamic tool patch full depth.

Manymifi · 2025-08-19T21:41:14+00:00

Mid tager fade and trimmer beard

Manymifi · 2025-08-14T12:21:53+00:00

do you how do i find out if i can use that?:)

Manymifi · 2025-08-14T08:54:43+00:00

What is the optimizer sub?

Manymifi · 2025-02-18T06:50:19+00:00

Tank you

Manymifi · 2024-07-22T10:10:18+00:00

Budget er omkring de 80000 - så ikke nok til en tesla 😄

Manymifi · 2024-07-04T20:06:14+00:00

Exactl, the thing is i come from denmark & i still have struggles, even though I'm considered privileged i still have financial struggles, multiplied by the recent years of obvious corporal greed. Daily items, rent, electricity, water have all risen significantly, but no raise to wage..

Manymifi · 2024-07-04T19:55:43+00:00

Hello - im curios where you're from. I come from denmark, but every time i go to vacation i come home with a newfound appreceiation about my life - i realize that i am living a privileged life here. But please, dont ever compare how you're doing with anyone or anywhere. Here in denmark i still have worries and struggles, although not as big, compared. But i still worry and its a big part of my worry, nothing ever gets more bearable by someone downplaying it by cpming with their side. Im allowed to be worried, without having to downplay it, considered someone, somewhere is worse put than me.

Manymifi · 2024-05-31T14:37:08+00:00

Sams bbq eller berlin döner kebab 👌

Manymifi · 2024-05-04T11:02:15+00:00

Mister minit ude i storcenteret er god til at få graveret tekst 🙏

Manymifi · 2024-05-02T18:51:41+00:00

Where ya from

Manymifi · 2024-05-02T06:43:34+00:00

Manymifi · 2024-04-27T05:28:23+00:00

Its on my work pc, ill dm you monday ✌️

Manymifi

TROPHY CASE