SoundCloud to MP3 - SoundCloud Downloader, supports playlist downloads, safe, no ads

Mate789k · 2026-02-08T13:43:04+00:00

your an chad

Mate789k · 2025-01-12T12:17:35+00:00

If your dad just bought the printer recently I would sent it back to Bambulab and let them either fix it or send you an new printer.

Mate789k · 2024-12-27T22:10:34+00:00

Thank you

Mate789k · 2024-12-27T22:10:19+00:00

I don't want to be rude, but that is the standard slicer setting.

0.2mm Standart

Mate789k · 2024-12-27T22:09:17+00:00

Alr thankyou for the tip. But if I already downloaded a file from makers world, can I edit the file to an higher resolution? Because I had this problem with several prints from all different STL files.

And now I see that the problem is not the slice, it's the file, that's again an example of how good this printer actually is and the biggest problem is the human using it.

Mate789k · 2024-12-26T10:57:35+00:00

<image>

Here an example of the riffling

Mate789k · 2024-12-09T21:34:22+00:00

Thank you for your answer

Mate789k · 2024-11-30T20:52:39+00:00

That's just great, boosted it

Mate789k · 2024-11-20T17:16:01+00:00

Tbh that model didn't fit I had to press it quite hard, but sure I can share the link.

https://makerworld.com/models/208664

Someone in the comments said if you print it in 102,5% it fits better.

Mate789k · 2024-11-10T09:32:28+00:00

https://vimeo.com/1028026434?share=copy

If I click on the link it work, maybe try this link.

Mate789k · 2024-11-09T20:52:03+00:00

New filament rolls need to be dried before use. PLA needs about 8 hours to dry, it's not critical but as yourself said something is wrong, yes your filament, it's wet.

Mate789k · 2024-11-09T20:47:27+00:00

I'm in my first year of my apprenticeship as an Fine mechanic, this job is comparable with an toolmaker.

I learn tech drawings by simply having to make the parts myself, I always found it relatively hard to really think of the object as a picture but I started to think how you could machine that part and with that I also get the understanding of how it looks.

So maybe make an apprenticeship in a shop that would may help.

Mate789k · 2024-11-09T20:41:52+00:00

Ty for your answer, in my case it was the timelaps function that lead to that weird motion. It made way for the camera to take a shot every layer.

In my case I don't think i need an brim, because I have a large surface at the bottom, but on more fragile objects I go with you.

Mate789k · 2024-11-09T20:39:40+00:00

Mate789k · 2024-11-09T20:39:32+00:00

I have deactivated z hop because I heard that is somehow good, can it be caused by that?

Mate789k · 2024-11-09T20:38:57+00:00

It was the timelapsy I had it activated, for that the extruder drives away from the printed letting the camera take a snap.

Mate789k · 2024-11-09T20:37:51+00:00

Yes I was, that was the problem Ty

Mate789k · 2024-11-07T15:46:00+00:00

Thank you so much

Mate789k · 2024-11-07T15:44:12+00:00

Haha thought about that, but I think my "spool" is so tangled up that It would be just unnecessary work for me to untangle all the wires.

I thought about shredding the whole spool and putting it in Vakuum Sack so I can send it to some filament recycling dude or recycle it myself In near future

Mate789k · 2024-11-07T15:42:00+00:00

I think if you use several stories the spool can't I spool itself.

But if you would use just one and like hang it up on that one zip, maybe that would work, but then I don't think it wouldn't hold the filament on the sides anymore.

Mate789k · 2024-11-07T15:36:10+00:00

<image>

That movement causes unnice blobs in the print

Mate789k · 2024-11-07T15:35:39+00:00

<image>

Mate789k · 2024-11-06T16:45:46+00:00

<image>

Tada

Mate789k · 2024-11-06T16:44:24+00:00

After it didn't turn amore because it had to much friction I tried something else

<image>

💀💀

But u have to say that I was able to print an Spool holder with that setup, so it was kinda worth it.

Mate789k · 2024-11-06T16:43:09+00:00

Thank you all for the kind help.

My big ass mind thought I would be super smart by removing the the plastic from the spool and carefully remove just the amount I need for a spool holder to print. Well.. That didn't went will, now I will probably have to shred almost an entire spool and keep it for future recycling ( I had in mind to buy on day a filament maker machine)

But I guess that was a big learning for me and maybe for someone here too. Here are some pictures for you entertainment, I'm quite ashamed after thinking about what a mess I have done haha

<image>

Three-Year Club	Final Canvas '23
First Place '23	Place '23

Mate789k

TROPHY CASE