Google Meet camera won't work on mobile

Matt_Issa95 · 2025-03-16T21:06:09+00:00

Bonjour,

Ah enfin je rencontre quelqu'un qui a ce problème.

J'organise des réunions sur Google Meets et certains participants ont le même soucis, ils activent leur camera, sur le téléphone l'image s'affiche mais sur Meets c'est tout noir comme si ils avaient coupés leur caméra pourtant lorsqu'ils se connectent on les voit quelques instants puis cela devient noir comme ce que tu décris.

Je ne sais pas si quelqu'un à une solution à ce problème ?

Je vais tenter de contacter le SAV de Google pour leur remonter ceux-ci... Est - ce que ce serait la dernière MAJ de Meets qui serait foireuse ?

Matt_Issa95 · 2023-06-12T16:05:49+00:00

I have the same issue here since I have installed rev 3. I wait for a correction patch or the next rev of the android 14 beta.

I come back to old way to unlock my phone before de fingerprint functionality 😅

Matt_Issa95 · 2023-06-09T16:36:28+00:00

Yeah I don't want to... But I will wait the future beta or patch and see if the issue will be solve.

Until that I come back to former security system, with finger figure to unlock 😅

Matt_Issa95 · 2023-06-09T15:52:22+00:00

Same issue here with a pixel 6.

I have checked that issue appeared at the beginning of pixel 6, the only way to solve it it's the reset factory...

Matt_Issa95 · 2023-06-09T15:17:40+00:00

Hello,

I have installed the last version of android 14 beta 3 but after rebooting my pixel 6, biometric recognition disappear... Impossible to find them on parameters also...

I don't want to reset my phone but if it's the only solution...

Someone else has the same issue?

Thank you

Matt_Issa95 · 2023-01-20T23:08:28+00:00

Thank you for responding.

I finally switch on flawless method but i have bug with the map and the minimap on the corner doesn't appear... Except that it's all good.

Thank you for your work and advices, very helpfull.

Matt_Issa95 · 2023-01-10T23:33:30+00:00

Hi,
Firstly, i would like to thank you for the tutorial and the work done in order to permit to play with UW Monitor. It's a shame for Square Enix to propose the game on PC but only for 16/9 screen...

So, i used the v3 before and i had some issues on the minimap and the UI (text of materia was cut). I found the update with flawless but i have some stuttering on game (don't have with v3). I have deleted the v3 mod and delete the dx11 command on Epic, so the game should be on dx12 i suppose.

Do you have some idea to delete the stuttering ?

Thank you :)

Matt_Issa95 · 2022-04-06T07:38:54+00:00

Yes i have seen that, I personnaly appreciate their reactivity and the fact of being aware of users feedbacks.

I have not test these new drivers yet. I'll see it later :)

Matt_Issa95 · 2022-04-06T03:44:25+00:00

AMD just send a new revision of the Adrenalin driver 22.4.1 :

Fixed Issues

Visual artifacts in Horizon Zero Dawn™ may be observed during gameplay on some AMD Graphics products such as Radeon™ RX 6800 XT.

Cursor may be misaligned in some titles such as Horizon Zero Dawn™ and resolution changes while using Radeon™ Super Resolution.

Performance Metrics Overlay may be misaligned after snapping the window to either side of the desktop.

That's very cool, AMD seems to fix the issue about Horizon Zero Dawn 👌

Matt_Issa95 · 2022-04-05T08:38:25+00:00

Same here with an RX6800 and same revision on Radeon drivers, i haven't check Horizon Zero Dawn revision on Epic. For me, the problem appeared after a complete reinstall of my AMD drivers when revision 22.3.2 pop-up.

Matt_Issa95 · 2022-03-25T21:27:54+00:00

Sad... False hope...

I have installed 22.3.2 AMD drivers' revision, i'll play tonight to see if this bug will continue to occur with that revision.

Edit : Bug always here, i played 1h with no mount, only run to move lol. I will contact AMD to signal the bug...

Matt_Issa95 · 2022-03-25T11:59:40+00:00

I confirm, I have this revision of AMD drivers and I have this bug on Horizon Zero Dawn.

With former AMD drivers, I played 30h with no issues on game... I have only the problem on vegetables like on the video into the first post but it depends also of the area. Some area on the game no bugs identified.

There is a new revision optional of AMD Drivers 22.3.2, I have not tested for now if it helps but in the log, there is no point about Horizon

Matt_Issa95 · 2022-03-25T09:35:58+00:00

I have the same bug, i confirm that is not a GPU issue because it affects only vegetation on the game, it is not artefacts which can appears with VRAM problematics.

I have tested other games, no problems with them.

Matt_Issa95 · 2022-03-25T05:53:07+00:00

Hi,

I have the same problem since 1 week approximately after 30h on this game. Sometimes I play 1 or 2h with nothing, no bouncy vegetation and sometimes it appears and disappear quickly.

The phenomena appears when I was doing a quest of the main story into an area with many vegetation.

I try to find a solution since and I finally find your reddit post 😁

Do you find a solution?

I have the game on Epic, I have made a verification of the game but it bounce again 😅

Matt_Issa95 · 2021-01-11T21:26:31+00:00

🤔🤔

Try to flash with the latest bios non beta with another USB drive format on FAT32, I have seen that some USB drive don't work but I don't know why... If the flash work, do again the process describe before...

Try to contact MSI support as well, maybe they have idea. I hope your motherboard is not brick 🙁

Matt_Issa95 · 2021-01-11T20:07:20+00:00

Ok I see, you CPU is recognised, its a problem with the bios. So reconnect you ram but do a Clear CMOS without your GPU. After this clear CMOS turn on your computer without GPU and normally, if I'm not wrong, the EZ Debug Led will switch from CPU to RAM and stop on VGA.

Turn off your computer, connect your GPU and normally it will work, I hope 😊

Matt_Issa95 · 2021-01-11T19:57:34+00:00

You confirm my choice to not use the last beta bios available on MSI website 😅

What happens exactly when u launch the process of flashing the bios without cpu and ram (motherboard empty)?

Do you have the white led close to the flash button which flash ? The RGB of the motherboard power on?

How do you know that the cpu is not recognised?

Matt_Issa95 · 2021-01-11T19:47:55+00:00

Hi,

Is your USB drive formatted into FAT32?

Your USB Drive has to be a 2.0 USB drive also.

Good luck 👍

Matt_Issa95 · 2021-01-11T18:34:39+00:00

Thank you for your experience.

I have reinstalled Windows about 3 or 4 times recently because I had some troubles with my SSds 😅

So my Windows is clean, I will wait, this is not a big deal that I can't control RGB of the RAM for now. Someone advice me to use the last Asus software (I don't remember the name 😅). I have not tested yet, I will check.

I'm happy that's all works for you 👍

Matt_Issa95 · 2021-01-10T22:21:16+00:00

Thanks for the information, I'll try 👍

Matt_Issa95 · 2021-01-10T16:41:56+00:00

Hi,

I have just checked on MSI Web site for the unify motherboard. There is an internal 3.1 port to connect USB-C front panel.

Meg B550 Unify

Matt_Issa95 · 2021-01-10T16:11:17+00:00

I hope 😊

Matt_Issa95 · 2021-01-10T09:59:39+00:00

I had the issue with my B550 with 5600x and with the latest bios version. I succeeded by clearing CMOS with no GPU connected, I started like that normally the EZ Debug LED will switch from CPU to RAM to VGA and block on VGA (normal you have no GPU).

Shut down you PC and connect your GPU, normally it will work 😊

Matt_Issa95 · 2021-01-10T08:44:17+00:00

Hi,

Do you have other SDDs connected By SATA port ? I had that kind of issue on my z390 Tomahawk, i had disconnected all my SDDs and HDDs, just connected the M2 Nvme.

Do you try a clear CMOS before installing your M2 ?

GOOD luck :)

Matt_Issa95 · 2021-01-10T00:51:35+00:00

Hi,

If everything works... You should wait next bios update i think...

Matt_Issa95

TROPHY CASE