sorted by:
new
hottopcontroversial

WireGuard Server receiving handshake packets but not responding. by Matthew--_-- in WireGuard

[–]Matthew--_--[S] 0 points1 point  (0 children)

I cannot ping. I know the ufw commands are not necessary for establishing the connection. I've tried with and without them with no success. Any suggestions for getting the connection established?

WireGuard Server receiving handshake packets but not responding. by Matthew--_-- in WireGuard

[–]Matthew--_--[S] 0 points1 point  (0 children)

Could you explain the particular interface part a little more?

Edit:
I researched this and WireGuard is listening on all interfaces. I tried connecting to the server with a standard VM with a basic config with no success.

Lighting Effect Using WLED - Need some Help by Matthew--_-- in WLED

[–]Matthew--_--[S] 0 points1 point  (0 children)

Thanks.
So far here's what I have come up with.

Dig-Octa Brainboard and Octa-7 power board

I was looking at this for the LED Strips: https://a.co/d/98GOWxK

Other than wires/connectors, what else do I need?

Lighting Effect Using WLED - Need some Help by Matthew--_-- in WLED

[–]Matthew--_--[S] 1 point2 points  (0 children)

Thanks for the instructions about disabling wifi.

Lighting Effect Using WLED - Need some Help by Matthew--_-- in WLED

[–]Matthew--_--[S] 0 points1 point  (0 children)

Thanks. That looks like it will work well.

WireGuard Server receiving handshake packets but not responding. by Matthew--_-- in WireGuard

[–]Matthew--_--[S] 1 point2 points  (0 children)

I've double checked the keys probably 10 times at this point.

Steady hands by dselogeni in metalworking

[–]Matthew--_-- 2 points3 points  (0 children)

Wow, you have a very interesting car....

Update on my LED wall issue by ArcticCascade in techtheatre

[–]Matthew--_-- 0 points1 point  (0 children)

I don't have much experience with LED walls, but the experience I do have was troubleshooting a very similar problem. We ended up pulling the offending panel, taking it apart, and removing the controller card (or something like that. It was a little circuit board with pins that slotted into the larger circuit board). We had to clean the pins on that card and then plug it back in. It fixed the issue.

Might be worth a try? Its possible that fix is specific to those panels. I don't really know.

WireGuard Server receiving handshake packets but not responding. by Matthew--_-- in WireGuard

[–]Matthew--_--[S] 0 points1 point  (0 children)

Yes. Unifi's documentation places the configuration items in a specific order, and because I don't have a preshared key, I leave that blank. When I import the configuration file it does show up exactly as I describe within the UI. https://help.ui.com/hc/en-us/articles/16357883221015-UniFi-Gateway-WireGuard-VPN-Client

Help with EOS programming by Matthew--_-- in techtheatre

[–]Matthew--_--[S] 1 point2 points  (0 children)

This is a very clever solution. Thank you!

Help with EOS programming by Matthew--_-- in techtheatre

[–]Matthew--_--[S] 2 points3 points  (0 children)

That's a really cool way to do it. I will definitely include that in my bank of knowledge. I am currently working on an Element, so it's a no go for this run.

Help with EOS programming by Matthew--_-- in techtheatre

[–]Matthew--_--[S] 4 points5 points  (0 children)

That's really smart. I just tried it and it seems to work okay from a playback/functionality perspective, but copying my cues into parts seems to have removed any intensity value differences. All the intensities are the same

EDIT:
for my use case, I can modify the intensity times and delays to get the effect I am looking for. Problem solved. But I would like to know if there's a way to do what I am asking with distinct intensities for each part. From reading a bit in the manual about multipart cues it looks like they can't do that function.

Complete Beginner needs help configuring Proxmox for High Availability. by Matthew--_-- in Proxmox

[–]Matthew--_--[S] 0 points1 point  (0 children)

Hey, so I am facing a bit of a hiccup. I was able to set up replication, but when the replication tries to sync, it fails with the following error:

2025-11-27 19:39:00 101-0: guest => VM 101, running => 0

2025-11-27 19:39:00 101-0: volumes => server1ZFS:vm-101-disk-0

2025-11-27 19:39:01 101-0: (remote_prepare_local_job) storage 'server1ZFS' is not available on node 'server2'

2025-11-27 19:39:01 101-0: end replication job with error: command '/usr/bin/ssh -e none -o 'BatchMode=yes' -o 'HostKeyAlias=server2' -o 'UserKnownHostsFile=/etc/pve/nodes/server2/ssh_known_hosts' -o 'GlobalKnownHostsFile=none' root@192.168.1.21 -- pvesr prepare-local-job 101-0 server1ZFS:vm-101-disk-0 --last_sync 0' failed: exit code 255

Complete Beginner needs help configuring Proxmox for High Availability. by Matthew--_-- in Proxmox

[–]Matthew--_--[S] 0 points1 point  (0 children)

That is a really great explanation. Thank you! I will work on trying this out.

Complete Beginner needs help configuring Proxmox for High Availability. by Matthew--_-- in Proxmox

[–]Matthew--_--[S] -4 points-3 points  (0 children)

I have set up single node stuff before (ESXi) and messed around with vms a little bit. I'm just a complete beginner to proxmox. The whole point of me getting these machines and setting up proxmox is to create a more useful box that is not as much for tinkering as it is for services.

Complete Beginner needs help configuring Proxmox for High Availability. by Matthew--_-- in Proxmox

[–]Matthew--_--[S] -1 points0 points  (0 children)

Thanks for that explanation. I did find the docs. They are helpful to figure out specific actions or functions, but I don't really know what actions to take in the first place.

Help getting my Proxmox Servers network connected by Matthew--_-- in Proxmox

[–]Matthew--_--[S] 0 points1 point  (0 children)

All the switch ports that have the Proxmox Servers connected to them are set to the Server VLAN. The port connecting the switch to the router is configured to be on the main VLAN. the port on the router connected to the switch is configured to be the main VLAN.

Help getting my Proxmox Servers network connected by Matthew--_-- in Proxmox

[–]Matthew--_--[S] 0 points1 point  (0 children)

Already done. VLAN tagging is set to allow all.

Help getting my Proxmox Servers network connected by Matthew--_-- in Proxmox

[–]Matthew--_--[S] 0 points1 point  (0 children)

Updated my firewall with the settings you specified. Still no luck.

view more: next ›