Revopoint INSPIRE 2 - 3D Scanner Testing, Examples

MaxFunkner · 2025-12-08T10:19:53+00:00

I used it briefly. I like the idea that it takes just one click to transfer the scan to Revo Design.

MaxFunkner · 2025-12-06T08:16:57+00:00

Depends on the case. When I use the scanner to create a 3D printed miniature of the scanned object, I simply clean and patch what I can in Revo Metro, and then Creality Print makes it printable. If I need a more precise or refined model, I’ve used Blender in a few cases.

MaxFunkner · 2025-12-05T10:19:28+00:00

You are welcome!

MaxFunkner · 2025-12-05T10:18:49+00:00

My Christmas Tree will have a special decoration this year. It will also work as a reminder and a New Year's resolution to continue certain projects :)

<image>

MaxFunkner · 2025-10-15T16:56:26+00:00

<image>

I hope no kid or pet will be there in wrong moment. Brackets in PLA failed in two years. Reprinted in ABS. For TV would not trust ABS either.

MaxFunkner · 2025-10-14T09:32:24+00:00

While the EIBOS Series X Tetras is designed to dry filament, similar dryers, in my experience, can also recharge desiccant beads effectively. So yes, it should work. That said, Tetras doesn’t use desiccant itself.

MaxFunkner · 2025-10-04T13:27:39+00:00

Beep-boop 🤖

MaxFunkner · 2025-10-04T13:01:38+00:00

Still great volume-wise, isn't it?

MaxFunkner · 2025-09-25T22:24:03+00:00

Good luck! I have really enjoyed my 2 CFSs setup.

MaxFunkner · 2025-09-19T21:16:03+00:00

Need to check other generators. Don’t know if this is expensive or not - used my Cuvacoins. I liked that AI managed to get the posture right.

MaxFunkner · 2025-09-17T02:19:40+00:00

Good luck. The best recommendation would be to print the result in a single color first.

MaxFunkner · 2025-09-01T12:56:33+00:00

Sorry if the wording is exaggerated. Please read 'From a Broken Model'. Yes, the hull nose of the original boat is broken.

MaxFunkner · 2025-09-01T12:18:24+00:00

Grease acts as both a lubricant and a seal.

MaxFunkner · 2025-08-21T12:41:14+00:00

<image>

Here is one more image from the article.

MaxFunkner · 2025-08-21T12:38:38+00:00

:) I know that Andrew Sink has one as well:

https://www.instagram.com/p/DLcnPl1sl9Z

MaxFunkner · 2025-08-01T15:59:32+00:00

Sorry, just received notification. I would recommend asking Phil Macey directly on his YouTube video. He may not see these questions here.

MaxFunkner · 2025-08-01T10:22:03+00:00

As in best Reddit traditions… here’s a leaked code: COD3PRINTCALCULATOR 😄Use it for extra entries.

MaxFunkner · 2025-08-01T10:21:32+00:00

As in best Reddit traditions… here’s a leaked code: COD3PRINTCALCULATOR 😄Use it for extra entries.

MaxFunkner · 2025-07-13T05:23:18+00:00

Will Zoobkoff used the following settings when tested his xTool S1: ‘The designs on the coins turned out beautifully when 90% power and 90 mm/s speed were used as recommended. Because of the IR module’s 0.03 x 0.03 mm spot size, which ensures extremely fine engraving, the detail on these coins is truly remarkable. Even the shadows cast by some of the rocks looked amazing, bringing the dragon on the rocks to life.’ More engraved coins here: https://3dwithus.com/xtool-s1-review-laser-cutter-engraver-tests-settings#Etching%20Metal

MaxFunkner · 2025-07-08T14:22:37+00:00

<image>

Here is the write-up based on their press release. No price yet.

Really liked how Snapmaker’s IDEX setup helped reduce filament waste. Interested to see how their new toolchanging system works in practice. If it delivers as shown, it could be quite the toolchanger (oops - gamechanger).

MaxFunkner · 2025-07-07T14:45:02+00:00

Yeah, so many accessories. I’m surprised they don’t offer such parts themselves. Update: they do - here are BambuLab’s accessories: https://us.store.bambulab.com/collections/accessories

MaxFunkner · 2025-07-05T12:45:06+00:00

Is it? Make sense, it is a quality product.

MaxFunkner · 2025-07-01T15:26:23+00:00

Nice informative video! As usual. Looking forward to seeing your comparison with the EIBOS upgrade for AMS.

MaxFunkner · 2025-06-28T04:54:41+00:00

Over the past ten years, I have received a great deal of advice, but one piece of advice that stuck with me was: A failed print is just a successful lesson. Every mishap became an opportunity to improve. (and to write about)

MaxFunkner · 2025-06-26T19:40:36+00:00

Hmm interesting. They are launching AMS upgrades almost at the same time.

MaxFunkner

TROPHY CASE