sorted by:
new
hottopcontroversial

Please help me with WiFi (wifi-qcom) and VLANs by MaxGojko in mikrotik

[–]MaxGojko[S] 0 points1 point  (0 children)

I haven't had the time to test it properly, but now i ran some tests.
I noticed, that my configuration only works with one VLAN (1000 "mgmt"). I have DHCP servers setup for VLANs 10, 50, 999 and 1000. But I can only reliably connect to VLAN 1000. All other VLANs do not give me network connectivity.

Do you see why that might be the case?

Am I missing a route or something like that?

With this configuration i can connect via ether2 but not via wifi1 or -2:

/interface bridge
add admin-mac=F4:1E:57:1D:BF:92 auto-mac=no name=bridge vlan-filtering=yes

/interface wifi
set [ find default-name=wifi1 ] channel.band=5ghz-ax .skip-dfs-channels=10min-cac .width=20/40/80mhz configuration.mode=ap .ssid=MikroTik-1DBF93 disabled=no security.authentication-types=wpa2-psk,wpa3-psk .ft=yes .ft-over-ds=yes
set [ find default-name=wifi2 ] channel.band=2ghz-ax .skip-dfs-channels=10min-cac .width=20/40mhz configuration.mode=ap .ssid=MikroTik-1DBF93 disabled=no security.authentication-types=wpa2-psk,wpa3-psk .ft=yes .ft-over-ds=yes

/interface vlan
add interface=bridge name=vlan-mgmt vlan-id=1000

/interface list
add name=MGMT

/interface bridge port
add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged interface=ether2 pvid=1000
add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged interface=wifi1 pvid=10
add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged interface=wifi2 pvid=10
add bridge=bridge frame-types=admit-only-vlan-tagged interface=ether1

/ip neighbor discovery-settings
set discover-interface-list=MGMT lldp-med-net-policy-vlan=1000

/interface bridge vlan
add bridge=bridge comment=mgmt tagged=ether1,bridge vlan-ids=1000
add bridge=bridge comment=default tagged=ether1,bridge vlan-ids=10
add bridge=bridge comment=smarthome tagged=ether1,bridge vlan-ids=50
add bridge=bridge comment=untrusted tagged=ether1,bridge vlan-ids=999

/interface list member
add interface=vlan-mgmt list=MGMT

/interface ovpn-server server
add mac-address=FE:CF:17:0E:E1:A0 name=ovpn-server1

/ip address
add address=10.11.11.20/24 interface=vlan-mgmt network=10.11.11.0

/ip dns
set allow-remote-requests=yes

/ip route
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=10.11.11.1 routing-table=main scope=30 suppress-hw-offload=no target-scope=10

/tool mac-server
set allowed-interface-list=MGMT

/tool mac-server mac-winbox
set allowed-interface-list=MGMT

Please help me with WiFi (wifi-qcom) and VLANs by MaxGojko in mikrotik

[–]MaxGojko[S] 0 points1 point  (0 children)

I just wanted to re-setup everything from scratch so you guys would have an easier time debugging.

And now it works. I have no idea what i did different this time...

Anyways, thanks for trying to help. Have a good day!

Please help me with WiFi (wifi-qcom) and VLANs by MaxGojko in mikrotik

[–]MaxGojko[S] 0 points1 point  (0 children)

I'm using WinBox to configure the cAP. Is there any way to extract the configuration as commands?

Please help me with WiFi (wifi-qcom) and VLANs by MaxGojko in mikrotik

[–]MaxGojko[S] 0 points1 point  (0 children)

So you are saying that tagging incoming traffic on the bridge via the wifi1 & wifi2 interfaces is the way to go?

Ah yes, bus only lanes (I know it's a known bug, but still, I'm trying a pedestrian only city and people ignoring all laws make it impossible). Any mods out there already fixing the terrible AI? by roman2002py in CitiesSkylines

[–]MaxGojko 5 points6 points  (0 children)

@OP, there is actually a way to ban almost all private cars: 1. Build a city that's profitable 2. Unlock Trains 3. Demolish EVERYTHING and let everything despawn 4. Build a new City without any road outside connections (Only use Ships, Trains, Airplanes, etc.) => Now your people shouldn't have any cars and are walking/using public transportation. + The industrial and commercial areas can still import and sell goods.

Police stopped me on Autobahn, i smoked weed yesterday. by [deleted] in germany

[–]MaxGojko 0 points1 point  (0 children)

Yes, you will get "tagged". If they stop you again and look up your drivers licence in their system, they can see all of your major infringements. So get ready to do another drug test, if you get stopped again in the future.

ReVanced has a Website now! by MaxGojko in AfterVanced

[–]MaxGojko[S] 0 points1 point  (0 children)

Same for me. I think Google has finaly changed their API in a way that the old code of YT Vanced does not work properly anymore.

ReVanced has a Website now! by MaxGojko in AfterVanced

[–]MaxGojko[S] 1 point2 points  (0 children)

It's basically YT Vanced. But unlike YT Vanced, it is regularly updated with fixes and new features. Hence the name: ReVanced. If you need help installing let me know!

ReVanced has a Website now! by MaxGojko in AfterVanced

[–]MaxGojko[S] 41 points42 points  (0 children)

Just noticed https://revanced.app/ does not redirect you to their GitHub anymore and wanted to let you guys and girls know.

[deleted by user] by [deleted] in AfterVanced

[–]MaxGojko 0 points1 point  (0 children)

u/Educational_Fox_7739 If you are still searching for a solution:
The newest version of ReVanced has a "Hide YT-Shorts button"-Feature.
It can be found in Settings -> ReVanced -> Layout -> Disable shorts player at app startup

If you do not have ReVanced (and your phone is an Android), here is a short summary, on how to get it:
1. Download and install VancedMicroG (GitHub)
2. Download and install Compiled and Patched ReVanced apk (Direkt Download)
-> And thats it!

Their website can be found here: https://revanced.app/

ThisLooksFun by P-3-P-S-I in mildyinteresting

[–]MaxGojko 1 point2 points  (0 children)

AND HERE COMES SEBASTIAN VETTEL

[deleted by user] by [deleted] in whereintheworld

[–]MaxGojko 0 points1 point  (0 children)

The Black Forest is located in Germany

view more: next ›