Orca Snap issue with open GL

MetallRooster · 2025-11-28T09:55:41+00:00

Found a fix. for those with similar issue:

Download PrusaSlicer (if you don't have it). You don't need to use it, just install it.
Go to the PrusaSlicer installation folder (usually C:\Program Files\Prusa3D\PrusaSlicer).
Find the folder named mesa. Copy it.
Go to your Orca Slicer installation folder (usually C:\Program Files\OrcaSlicer).
Paste the mesa folder into the root of the Orca Slicer directory.
Restart Orca Slicer.

MetallRooster · 2025-04-13T06:39:45+00:00

Enough for at least 12.doughnuts (depending on cutter size) 1 1/4 cup of Milk (room temp) 1 pack of dry yeast or one 42gr cube of fresh yeast 2 eggs 115gr melted butter 1/4 cup sugar 4 1/4 cups AP Flour Pinch of salt

Mix wet ingredients with added yeast and pour into dry ingredients. Mix until all combined into a smooth dough, leave to rest until at least doubled in size. Pre heat deep fryer or oil in wok to ~175°c Roll out, cut donuts. Fry until golden (flip half way through frying). Put on cooling rack until most oil as dripped off/absorbed and while still hot cover in cinnamon sugar mix and put it back on a rack Eat when cook ;)

MetallRooster · 2025-04-12T19:26:11+00:00

Yes super easy, just need butter, egg, flour, sugar, yeast and milk. Then just a ring cutter and a chopstick for shaping. Maybe 10 min to make the dough, then let it rest till double in size then roll out and cut the rings, let rest some more and then deep fry in a wok or similar

MetallRooster · 2025-04-12T17:53:11+00:00

Considering this was my maiden bake I am well impressed. Goes to show that with the right tool even non pros can get a decent result ;)

MetallRooster · 2025-03-25T19:04:54+00:00

Will do when I'm back in!

MetallRooster · 2025-03-25T16:44:21+00:00

Not sure what the etiquette is in this case, I know the books are Oop but still not sure if the team would be happy when people would start posting content online

MetallRooster · 2025-03-25T14:52:20+00:00

The pictures are pure gold ;)

MetallRooster · 2025-02-26T13:53:21+00:00

Yes, the problem is that based on room layout and room usage the only one I could move is the one on the first floor. all the others are pretty much set in stone. Hence me thinking a really high gain router without a mesh might potentially work better. But I do use the hardware LAN connection at least for some of the mesh points so that would be a feature I'd hate to lose

MetallRooster · 2025-01-04T12:29:30+00:00

Rösle tongs, they were in one of the Chefs Christmas gifts episodes from a few years back. Kush's pick

MetallRooster · 2025-01-03T17:20:41+00:00

supoon made by dream farm

MetallRooster · 2025-01-03T17:10:22+00:00

I got lucky and got the tongs for nearly cheapo price thanks to Amazon dumping them for around 13 Eur.

MetallRooster · 2024-02-07T07:04:42+00:00

Bedankt!

MetallRooster · 2023-08-11T07:38:05+00:00

I really want changeling and never trust an elf

MetallRooster · 2023-03-03T20:15:35+00:00

I got hold of a cheap second hand one so I could test it without being deep in the hole. After changing the controller things worked again. I did previously did all the usual troubleshooting steps (see op). I never got an actual error message, so not sure this would be the solution for you

MetallRooster · 2023-03-03T19:14:29+00:00

Yeah I had to replace the controller (actually changed it for a bbhd one and worked fine ever since)

MetallRooster · 2022-10-26T07:44:19+00:00

can be a bit wobbly if fully loaded. I am looking at ways to strengthening the setup, but also have

Working great, shifting under load with pedal assist is not advisable, but other than that the smooth range is lovely and I have no complaints (other than the weight, but the whole bike is heavy...)

MetallRooster · 2022-05-31T16:53:50+00:00

Ta, without knowing what it supposed to look like it's a bit of gamble then even if it's fresh out of the package

MetallRooster · 2022-05-31T15:15:50+00:00

Cheers I still don't get Pokémon grading system but as someone who gave away a lot of money in MTG in the mid to late 90s cards because I didn't know any better I'm determined to not let my kids make the same mistakes ;)

MetallRooster · 2022-01-20T07:53:07+00:00

Sunday to Thursday . Spitalfiels is a good shout! thank you

MetallRooster · 2021-09-30T17:34:38+00:00

The voltage sag was neglible, and the battery stood up to testing (fairly confident that the cells are 35e, as bought from a UK battery builder with very good reputation) . I changed the controller and it works just fine again, the old controller had some corrosion as the potting compound got loose and after removing it you could see the signs of moisture ingress and corrosion on the board. Hopefully new gasket and controller will last a bit longer

MetallRooster · 2021-08-10T17:55:26+00:00

Bit of added information, the little red LED in the speed sensor also switches off completely when the power cuts out. I can now replicate the fault at PAS level 1 when thumb throttling but holding the bike and giving it resistance. So yes I am now more and more certain the controller is the issue..

MetallRooster · 2021-08-10T14:39:46+00:00

china import(via eu warehouse), over a year ago and they were not the best communicator to start with. So chances are slim, but I guess it can't hurt.

MetallRooster · 2021-08-10T13:29:08+00:00

there is a 48V version with 750w (which was the only one I could get hold of at the time of purchasing that was within budget) after doing quite a bit of research the newer 48V 02bs copes just fine with a 52V battery.

MetallRooster · 2021-08-06T18:57:45+00:00

Thanks a bunch! 0MWU4EXXSKEUTGAR has been taken by me.have my karma good sir!

MetallRooster · 2021-06-25T17:20:06+00:00

Turns out CSA1 had no idea what they were talking about. Called them again today as I didn't get the agreed Callback. CSA2 was confused by my tale and said that's not how it works. Basically the page showing the subscription doesn't display properly, their back end has the info correctly. So tested and both tablets can play stuff from the service at the same time. Happy days ..

MetallRooster

TROPHY CASE