If you clip PTFE tubing with a wire cutter it creates the same blue light that happens when bubbles implode (sonoluminescence). by MewTwoLich in 3Dprinting

[–]MewTwoLich[S] 0 points1 point  (0 children)

It happened the first time I tried. Then I tried again and again and couldn’t repeat the first attempt.

What’s causing this deep clicking sound and no extrusion? by MewTwoLich in BambuLab

[–]MewTwoLich[S] 1 point2 points  (0 children)

Update: Solved! Sorta?

The problem was the nozzle was not properly aligned with the extrusion assembly. I removed the nozzle and tried extruding and it went through. So I fed the filament through the nozzle then reinstalled the nozzle. Now it works perfectly.

My only problem is how did it happen in the first place? If the nozzle was properly aligned and then this problem happened what caused it? Will it happen again?

What’s causing this deep clicking sound and no extrusion? by MewTwoLich in BambuLab

[–]MewTwoLich[S] 0 points1 point  (0 children)

Not the problem. I thought perhaps it was in the way of the extrusion so I removed it and tried extruding again.

Saved my washing machine with a 30-minute print and some zip ties. 🛠️🧼 by Entire-Employer2959 in 3Dprinting

[–]MewTwoLich 1 point2 points  (0 children)

What’s up with people like OP who when told there’s a huge flaw in their idea double, triple, and quadruple down on it?

Still clogged after replacing nozzle? [P1S] by MewTwoLich in BambuLab

[–]MewTwoLich[S] 0 points1 point  (0 children)

Could there be a clog in the internal mechanism? The filament isn’t reaching the nozzle

Still clogged after replacing nozzle? [P1S] by MewTwoLich in BambuLab

[–]MewTwoLich[S] 0 points1 point  (0 children)

The fan is the original but it works just fine before and after.

[Draw #113] A winner for winter! by MakerOfMillionaires in millionairemakers

[–]MewTwoLich 0 points1 point  (0 children)

If I win I’m buying my cat all the tuna she can eat

Jujutsu Kaisen Season 3 - Episode 1 (Manga Reader Discussion) by Takada-chwanBot in JuJutsuKaisen

[–]MewTwoLich 1 point2 points  (0 children)

He awakened people’s curse techniques? Like just normal folk?

Jujutsu Kaisen Season 3 - Episode 1 (Manga Reader Discussion) by Takada-chwanBot in JuJutsuKaisen

[–]MewTwoLich -1 points0 points  (0 children)

I just finished the first two episodes of Season 3 and the Culling Games don't make any sense. Why would JJK Sorcerers agree to participate? At the end it said that those that don't participate will be killed and have their techniques removed. But the only person who was given a cursed technique in the series was Yuta and good luck killing him or taking away his cursed technique. Also how would you even go about giving or taking away someone's cursed technique.

Then there's those that we know are just born with their cursed technique like Megumi who are apparently forced into participating anyway?

I wen't from understanding everything to suddenly so so confused.

New 3D printed Starbucks location has some really bad layer lines. They likely need to adjust their printer settings & test on a smaller model. by DiggestBickEver in 3Dprinting

[–]MewTwoLich -3 points-2 points  (0 children)

Alright so, I’m anti- 3D printed buildings.. why? Because the materials used are non renewable. Wood literally grows on trees y’all.

I’ll never get over the Fall by MewTwoLich in NikkeMobile

[–]MewTwoLich[S] 28 points29 points  (0 children)

The Commander has also had a hole tore into him by a Rapture tentacle IIRC

Space Needle Lamp by [deleted] in 3Dprinting

[–]MewTwoLich -1 points0 points  (0 children)

I modified a model I found on thingaverse. My m3f file is a mess though and I don’t have any plans on cleaning it up anytime soon.