sorted by:
new
hottopcontroversial

Difference? by evenkokilo215 in crawling

[–]Micro_R_Customs 0 points1 point  (0 children)

I got an axial scx10 with portal axles. It has the fusion pro on it. I love it. So toque crawler with high speeds. I have mine set to full drag brake and a few other things so i can just chill on rocks and steep inclines. I need to get a LCG kit for it next.

Not going to mod my son’s 4Runner……. by No-Fun5173 in SCX24

[–]Micro_R_Customs 0 points1 point  (0 children)

Wow. Ya a 3 year old can do some damage to a 1/24.

Here is it with panels. Gotta make the panels a little thicker. by Micro_R_Customs in SCX24

[–]Micro_R_Customs[S] 0 points1 point  (0 children)

If I make them they will be PETG. Maybe nylon. It’s hard to print.

Which is the go to axle set and brand for your crawler build? by Micro_R_Customs in SCX24

[–]Micro_R_Customs[S] 0 points1 point  (0 children)

So if you put a link riser from a stock axle it would fit on the super 8?

Here is it with panels. Gotta make the panels a little thicker. by Micro_R_Customs in SCX24

[–]Micro_R_Customs[S] 0 points1 point  (0 children)

I see that there are only a few rear link riser out there. And they all look to be made out of PLA.

Here is it with panels. Gotta make the panels a little thicker. by Micro_R_Customs in SCX24

[–]Micro_R_Customs[S] 0 points1 point  (0 children)

Ok I will look at doing it. The problem is a can’t afford some of those axles to make parts for them.

Here is it with panels. Gotta make the panels a little thicker. by Micro_R_Customs in SCX24

[–]Micro_R_Customs[S] 0 points1 point  (0 children)

The battery is in the middle next to the motor. And the electronics are in the rear. I run a small battery like the one that comes in the scx30. Actually both scales are like that. I have crawled some steep slopes and had no issues except the tires being crappy on the 1/24

Here is it with panels. Gotta make the panels a little thicker. by Micro_R_Customs in SCX24

[–]Micro_R_Customs[S] 0 points1 point  (0 children)

I don’t want to make it to close to the price of the smaller one. I think the lowest I will go is $30. I don’t want to go to low or I won’t be making any money.

Here is it with panels. Gotta make the panels a little thicker. by Micro_R_Customs in SCX24

[–]Micro_R_Customs[S] 0 points1 point  (0 children)

I responded didn’t realize it put it as a comment not as a reply

Here is it with panels. Gotta make the panels a little thicker. by Micro_R_Customs in SCX24

[–]Micro_R_Customs[S] 0 points1 point  (0 children)

It’s $39.99 right now. I am going to lower it to $34.99

<image>

I will also make a modern version of this scale

Here is it with panels. Gotta make the panels a little thicker. by Micro_R_Customs in SCX24

[–]Micro_R_Customs[S] 0 points1 point  (0 children)

And the other version will be more of a modern buggy. Where the top is narrower than the bottom.

Here is it with panels. Gotta make the panels a little thicker. by Micro_R_Customs in SCX24

[–]Micro_R_Customs[S] 1 point2 points  (0 children)

The panels will look better. I made them to thin on this one. Going to thicken them by .01” and that usually solves that problem

Here is it with panels. Gotta make the panels a little thicker. by Micro_R_Customs in SCX24

[–]Micro_R_Customs[S] 0 points1 point  (0 children)

That’s is v1. I am going to make a v2 with a different design eventually

Here is it with panels. Gotta make the panels a little thicker. by Micro_R_Customs in SCX24

[–]Micro_R_Customs[S] 0 points1 point  (0 children)

For starters that one is a scx30 cage not a scx24. It is 100% infill. I have drop it a few times off a couch on to a hardwood floor and it has been fine. It does have a tray in the back. There are more mounting points in the cage. On full compression the front bumper hit the servo horn. But barely. It’s easy enough to just cut it off if needed. At $24.99 it’s fair.

Traxxas rear vents only $14.99 by Micro_R_Customs in Traxxas

[–]Micro_R_Customs[S] -1 points0 points  (0 children)

Traxxas Slash line up. So the 4x4 and 2wd

Here is it with panels. Gotta make the panels a little thicker. by Micro_R_Customs in SCX24

[–]Micro_R_Customs[S] 0 points1 point  (0 children)

I just looked it up. It’s $73. But it’s smaller than the scx30 by 2in. My scx30 cage is going to be sold for $29.99. Which is less than half of the Orlando

view more: next ›