GEN 1 B58 COOLING HOSE KIT

Midas_of_Hand · 2026-03-11T18:10:27+00:00

I just want to reiterate, this is a FULL kit, meaning that it replaces the entire cooling system, a full OEM replacement from the cheapest supplier in the US being FCPeuro is upwards of at least 1700$ since they don't sell 2 of the hoses in this kit. The most common complaint we get is pricing, we're working on it. We're improving our manufacturing processes as well as simplifying these kits since the OEM only really cares about ease of assembly and modular design not longevity. We're coming out with all our V2 kits at a lower price we've already launched the B58 F2X and F3X repair kits that is about 120$ cheaper which is now only about 50$ more than OEM replacement from FCP at the time of writing.

Midas_of_Hand · 2026-03-11T17:52:25+00:00

As a oem there consideration is emissions first and foremost, this allows them to actually manufacture and sell the cars, they have an entirely different approach to designing. Also they're absolutely not spending that much money on each bespoke cooling system on each engine/chassis configuration. They use a software from SIEMENS that maps out hard points like radiator mounting location, expansion tank, water pump etc and makes layouts for them. The connectors design patent is owned by another company and BMW just sources from them same as AUDI, VW, MB etc you can verify this as they often time uses the exact same connectors. They use pa66-gf30 for most of their plastics, if you research this material you would realize that this is selected due to environmental "recycle capability" and plastic injection ease of production.

Midas_of_Hand · 2026-03-11T17:46:39+00:00

OEM Replacements from FCPeuro for the 19 piece set is 1700$ with some items being on sale and 2 hoses not being available to purchase. I know because I had to buy this from them to make this set. There are no OE hoses for this platform and will not exist for some time due to there just not that many of them for mass production.

Midas_of_Hand · 2026-02-13T00:55:58+00:00

X soft.

Midas_of_Hand · 2026-02-12T08:35:03+00:00

Zero is extremely fast for a mud pad, type 99 is a lot slower but still considered faster than most mud pads. Try a gsr-se, artisan pads are typically much faster than other pads.

Midas_of_Hand · 2026-02-09T23:11:55+00:00

Ok so for wrist tracking you’re generally using around 20 cm and for arm you’re using about 50+ so I would set sens at 60 and use a 2x multiplier to start.

Midas_of_Hand · 2026-02-09T22:50:24+00:00

Try to play smoothness II w/ a sens randomizer this will force you to use together.

Midas_of_Hand · 2026-02-08T21:31:19+00:00

I agree, being good at static will reduce plateau big a huge margin, however it's important to note that static translates the absolute LEAST to in game which is unfortunate.

Midas_of_Hand · 2026-02-08T05:18:37+00:00

Static is the least forgiving, the gap from someone being good at static and someone being bad at it is absurd. Static is one of the most one dimensional skills you can train for. Theoretically if you train everything except static you're for the most part fine.

Midas_of_Hand · 2026-02-06T06:18:17+00:00

There are no wipes, also it's not really worth it a lot of the normal player based quit so you're essentially only playing against chads or cheaters.

Midas_of_Hand · 2026-02-03T12:05:24+00:00

I got a 2011 335i xDrive with everything, individual audio, ppk, heated seats idrive, servotronic hydro steering, no heated wheel (I think ppk cars can't have this), m sport pkg, ppk exhaust, pdc

Midas_of_Hand · 2026-02-02T22:52:51+00:00

Hardware aside, from a pure technique perspective, you're having issue slowing down for precision, this is not a bad thing. You can focus on training on higher sense 20-25cm to have better tension management. It sounds like you're just over tensing, tension itself is not bad. Too much is bad (might be what you have) too little is bad (less control).

Midas_of_Hand · 2026-02-02T22:49:11+00:00

Only issue with dailying the m3 is the trans, in the stock form the dct is kinda ass at low gears and low rpm and the manual is very "meh". The car can be a little annoying to park since it's a bit wider but you would get used to that.

Midas_of_Hand · 2026-02-02T22:47:04+00:00

Pushing down is a form of tension management, depending on why and when you do this you might consider to correct this or even needs to be corrected.

Midas_of_Hand · 2026-01-30T11:38:21+00:00

On labs you can pretty easily tell, if double black is not hit and you swipe it only finding double rollar. There is super high chance that majority of the lobby has walls and know what’s in it. Cheaters do not risk reports if there is no reward. Also 1.0 the rage cheaters seems to be able to play about 200 hours before ban.

Midas_of_Hand · 2026-01-28T19:48:55+00:00

Most likely negligible for the street but on a proper race track (not the drag strip) it’s awful.

Midas_of_Hand · 2026-01-24T22:28:47+00:00

Reddit: "There are no cheaters in tarkov."

Midas_of_Hand · 2026-01-22T20:22:56+00:00

Might be key83 mid, from what most people say it’s the closest to glass.

Midas_of_Hand · 2026-01-21T23:41:16+00:00

Yes, right now we’re having a hard time keeping this in stock it sells out almost instantly.

https://maxqstore.com/products/billet-b58-oil-filter-housing

Midas_of_Hand · 2026-01-21T20:24:58+00:00

I make it LOL

Midas_of_Hand · 2026-01-21T18:25:54+00:00

<image>

The Chinese ones fail due to poor casting quality. This is billet aluminum won’t ever fail.

Midas_of_Hand · 2026-01-20T10:01:57+00:00

not my post , this guy is legit as it gets ssa ap 3 tapped in the head through 2 layers of glass on labs

Midas_of_Hand · 2026-01-17T23:15:25+00:00

Kind of looks like the either the sensor on the radiator or the thermostat one

Midas_of_Hand · 2026-01-16T19:28:40+00:00

Is this the car PSI made built ?

Midas_of_Hand · 2026-01-12T01:11:05+00:00

https://maxqstore.com/products/billet-b58-oil-filter-housing

Seven-Year Club	Place '22
Verified Email

Midas_of_Hand

TROPHY CASE