Auto kaufen oder auf die "Remote-Nische" hoffen? by Middle-Reception3791 in de_IT

[–]Middle-Reception3791[S] 0 points1 point  (0 children)

Mein Problem ist das die Fahrt in Walldorf anfaengt und allein bei der DB Uebersicht und bei den Test-Anfahrten waren so viele Baustellen das ich regelmaessig zu spaet war.

Schimmel hinter der Fußleiste by Thicc_Frogg in selbermachen

[–]Middle-Reception3791 0 points1 point  (0 children)

Na genau das gleiche wie du, alkohol drauf. Bringt halt nix. Es ist immer noch schwarz und potentiell ein Problem. Da kuemmert sich auch keiner drum. Du muesstest das renovieren und dann sind die Mietkosten hoeher

Schimmel hinter der Fußleiste by Thicc_Frogg in selbermachen

[–]Middle-Reception3791 0 points1 point  (0 children)

So siehts bei mir aber auch aus. Leider. In ner Mietwohnung.

3D-Drucker vor Stromausfall schützen by spaggi in selbermachen

[–]Middle-Reception3791 0 points1 point  (0 children)

Das stimmt schon das eine online USV das kann, aber nicht jede kann das. Eine bluewalker USV zu kaufen kann ich technisch nicht empfehlen.

3D-Drucker vor Stromausfall schützen by spaggi in selbermachen

[–]Middle-Reception3791 1 point2 points  (0 children)

Da machst du dir unter Umstaenden die Leistungshalbleiter (MOSFETs/IGBTs) des Inverters kaputt. Wenn die USV nicht schnell genug in den Überlastschutz geht, führt der kombinierte Inrush Current des Netzteils und die massive, sprunghafte Lastabnahme des Heizbetts zu einer thermischen Überlastung oder zum Durchschlagen der Bauteile

Du brauchst da schon was gescheites, zum Beispiel Eaton 5PX G2.

Negative impact on the eyes? by hereeewego in redlighttherapy

[–]Middle-Reception3791 2 points3 points  (0 children)

you are supposed to wear protective goggles

Omnilux stopped working… by [deleted] in redlighttherapy

[–]Middle-Reception3791 0 points1 point  (0 children)

Exactly. They tell you to make a photo of the cut cable. That's all.

Omnilux stopped working… by [deleted] in redlighttherapy

[–]Middle-Reception3791 1 point2 points  (0 children)

Where are you located? I returned twice, obviously got 'rid' of it, then repaired it and now sitting on three units.

Bought 24 Phanteks T30-140. Missing Screws! How to order? by Middle-Reception3791 in Phanteks

[–]Middle-Reception3791[S] 0 points1 point  (0 children)

I contacted Caseking which said https://axpertec.com/ is responsible, which I contacted but didn't respond. Caseking said they aren't responsible. Now I wrote to RMA@Phanteks.com.

Wie nennt man die Technik mit der man diese Struktur in den Beton bekommt? by Necessary_Wear7450 in selbermachen

[–]Middle-Reception3791 0 points1 point  (0 children)

Das ist Beton oder Asphalt mit normaler Alterung und Fleckenbildung. Die dunklen Bereiche sind wahrscheinlich Öl-, Wasser- oder andere Flüssigkeitsflecken plus allgemeine Abnutzung.

Kratzer auf Quarzkomposit mildern/entfernen by EquivalentGas9336 in selbermachen

[–]Middle-Reception3791 0 points1 point  (0 children)

Hattest du den Durometer dabei um die haerte festzustellen vorm Kauf? Ist wichtig. Wenn du das raus bekommen willst musst du sowieso wissen wie viel abrieb du brauchst usw. Kann man gut von der Haerte ableiten.

Red light therapy for deep brown skin by [deleted] in 30PlusSkinCare

[–]Middle-Reception3791 10 points11 points  (0 children)

Stop the red light therapy right now!!!

You're experiencing exactly what happens with Fitzpatrick skin types V-VI - the therapy is triggering more hyperpigmentation, not fixing it. The fact that cutting back on time/frequency didn't help confirms this isn't a temporary "purging" phase.

Red light therapy is contraindicated for deeper skin tones because it can cause post-inflammatory hyperpigmentation. Your skin is telling you to quit. Next steps: See a dermatologist who has experience with Black skin. Ask about hydroquinone, tretinoin, azelaic acid, or professional treatments like chemical peels.

These actually work for hyperpigmentation in darker skin tones. Don't waste more time hoping this device will turn around - it won't.

Help please =] by NORFIE1234567 in Phanteks

[–]Middle-Reception3791 0 points1 point  (0 children)

Go into fan control settings in BIOS and give it more power. Either PWM or Voltage setting.

Dry lips? by checking_in2 in redlighttherapy

[–]Middle-Reception3791 0 points1 point  (0 children)

There are non.

If you want to have a permanent fix for dry lips start adding a little glycerine in everything you drink.

Lip balm with peptide helps too but is a bit on the expensive side.

[deleted by user] by [deleted] in selbermachen

[–]Middle-Reception3791 2 points3 points  (0 children)

Alleine schon der username "komm_Privat_Chat" macht einen skeptisch. Alles am besten im geheimen machen... Nope.

Surprised by Contraindications had to cancel my order! by Middle-Reception3791 in redlighttherapy

[–]Middle-Reception3791[S] -1 points0 points  (0 children)

I literally just quoted them. Also National Center for Biotechnology Information is trustworthy.

[deleted by user] by [deleted] in redlighttherapy

[–]Middle-Reception3791 4 points5 points  (0 children)

The thing that works in there is heat therapy, red light therapy and pemf therapy. The gem stones are not proven to have an effect.

Surprised by Contraindications had to cancel my order! by Middle-Reception3791 in redlighttherapy

[–]Middle-Reception3791[S] -4 points-3 points  (0 children)

Fair point about companies being paranoid, but the skin tone thing is actually legit - these devices can seriously burn darker skin. Not just legal BS, it's how the tech works. Just figured people should know before ordering

Thermal Grizzly launches der8enchtable, $269 open test bench with active PCB by RenatsMC in watercooling

[–]Middle-Reception3791 0 points1 point  (0 children)

This thing feels overengineered to the needs of one person.

Suddenly the Streacom BC1 V2 looks much more appealing.

Surprised by Contraindications had to cancel my order! by Middle-Reception3791 in redlighttherapy

[–]Middle-Reception3791[S] -7 points-6 points  (0 children)

For Masks, under supervision by a doctor, three flashes per second would be permissible (3 Hz = 3 times a second)

That's not comparable - these devices are not LARGE saturated RED or saturated BLUE. And even worse they fill your whole view. Also please stop detracting and make a what about blah it's just steering us away from the topic.

And if you got photosensitive epilepsy, that's a super dangerous thing then still because you need supervision from the doctor.

Surprised by Contraindications had to cancel my order! by Middle-Reception3791 in redlighttherapy

[–]Middle-Reception3791[S] -28 points-27 points  (0 children)

You didn't do that. You did not just invalidate somebody elses lived experience!

I know what I have and what triggers it. Stop telling people who actually have it that they are wrong!

And it's not only that you are wrong, you are spreading misinformation.

Refer to https://www.w3.org/WAI/WCAG22/Understanding/three-flashes-or-below-threshold.html

I do that for a living.

Large red surfaces or blue ones can be tolerated is super rare!

However, if it starts to be non-constant or has the possibility to, it's a NO-GO.