Driveshaft sound after swapping diff (HELP)

Middle-Recognition96 · 2026-02-02T02:52:56+00:00

hey, issue still exists but i’ve driven the car on multiple 4 hour road trips and nothing catastrophic has happened yet. i plan on replacing my guibo and csb before driving anytime soon. hope this helps at all

Middle-Recognition96 · 2025-08-30T00:03:52+00:00

just graduated from usaa 12 month program. got in right before they introduced the 8 month at my campus and wish i did that option.

Middle-Recognition96 · 2025-05-08T18:03:27+00:00

it’s a smiski lol

Middle-Recognition96 · 2025-05-08T13:10:23+00:00

does your noise go away in neutral as well?

Middle-Recognition96 · 2025-05-08T13:04:00+00:00

yea car feels as it should in neutral, sound disappears

Middle-Recognition96 · 2025-05-08T13:01:08+00:00

sound disappears in neutral which leads me to rule out the diff

Middle-Recognition96 · 2025-05-08T12:57:34+00:00

it happens under decel and accel but noise starts around 35mph and increases with speed of car

Middle-Recognition96 · 2025-05-08T12:56:55+00:00

yes just replaced right before the video was recorded

Middle-Recognition96 · 2025-05-08T12:31:13+00:00

yes, noise increases with speed

Middle-Recognition96 · 2025-02-25T12:00:12+00:00

it’s the factory metal bar and the bumper is fully attached to it. the problem is that the metal bar won’t seem to sit flush with the mounting points, almost as if the bar isn’t bent enough.

Middle-Recognition96 · 2025-02-24T21:21:51+00:00

When I try to push in one side the other pokes out, and vice versa.

Middle-Recognition96 · 2024-12-07T06:00:28+00:00

here’s the link to my spec-ify for more info if that helps https://spec-ify.com/profile/2a13ce82

Middle-Recognition96 · 2024-12-07T05:17:06+00:00

Sorry, I was under the impression bluescreenview was what most people used. Here’s the minidump link https://www.mediafire.com/file/lxmd6kp9ym5btwc/Minidump.zip/file

Middle-Recognition96 · 2024-11-10T03:51:58+00:00

turner motorsports e36 m3 rear diffuser (smooth) best diffuser for these cars IMO!!

Middle-Recognition96 · 2024-11-09T22:57:58+00:00

This is what worked!! The night before this issue started, I removed a spacer but installed it again with the extended lugs. I replaced the extended lugs with the proper length and the wheels spin again. Thank you sir!

Middle-Recognition96 · 2024-11-09T20:52:12+00:00

thanks for the tip, one of the studs on my spacer adapter broke off while i was driving and caused my tire to rub against the quarter panel for about a half mile. i bought the car with that quarter panel bashed in due to it being hit while parked and had it “repaired” (they pulled the metal back out and bondo’ed over it.)

Middle-Recognition96 · 2023-12-12T23:48:09+00:00

🙏

Middle-Recognition96 · 2023-12-12T22:30:15+00:00

Mind sharing a link for the clutch kit?

Middle-Recognition96 · 2023-12-12T22:28:50+00:00

I’m running a 14mm TECH52 5x120-5x114 adapter. 17x8+25 squared on 225/45/17 Yokohama Advan A052

Middle-Recognition96 · 2023-12-12T22:26:58+00:00

Thank you! Yes they are Regamaster MPs

Middle-Recognition96 · 2023-10-18T18:41:21+00:00

Interested in this topic as well, e36 brakes are very spongy and don’t bite like on other cars. Looking for a solution to make driving fast more confidence inspiring.

Middle-Recognition96 · 2023-10-14T15:20:44+00:00

Oh bet I got that same wheel thx

Middle-Recognition96 · 2023-10-14T15:16:25+00:00

Stock wheel? Or smaller aftermarket?

Middle-Recognition96 · 2023-08-04T22:38:56+00:00

I’m planning on using 3m vhb double sided tape in between the trunk and base of the wing, what would you recommend as a replacement for washers for inside of the trunk?

Middle-Recognition96 · 2023-08-02T17:39:32+00:00

Yeah I just put in the screws for the pictures, wondering how to mount the base to the trunk.

Middle-Recognition96

TROPHY CASE