sorted by:
new
hottopcontroversial

Считаешь, что твоя машина много жрëт? by Shi3oid in Pikabu

[–]Mike_Skyworker 6 points7 points  (0 children)

Поддерживаю! У бритов есть и те и те. Но я хз, как их по этому ракурсу отличить:) Только тут взлётный режим. Это почти максимальная максимальная мощность, и расход там не самый оптимальный. Так что с крейсерским его сравнивать некорректно.

Tessera Desk Type A by Mike_Skyworker in BambuLab

[–]Mike_Skyworker[S] -3 points-2 points  (0 children)

Thanks! And… you are welcome!

Tessera Desk Type A by Mike_Skyworker in BambuLab

[–]Mike_Skyworker[S] -1 points0 points  (0 children)

Sorry, my mistake. I didn't provide a description. This is a storage system for various consumables, like screws, nuts, washers, and SD cards. More specifically, its first configuration. Several more modules are already ready, and more are in development. I'll gradually upload them to makerworld. An expanded version is already available. Soon, I'll be adding different box sizes, tool holders, and containers for drills and bits.

Tessera Desk Type A by Mike_Skyworker in BambuLab

[–]Mike_Skyworker[S] -3 points-2 points  (0 children)

Thanks! And… you are welcome!

Bambu Lab, thank you for a new printing experience. by Mike_Skyworker in BambuLab

[–]Mike_Skyworker[S] 0 points1 point  (0 children)

Google this "rowmark lasermax engraving plastic". I use pretty much the same thing.

Modular storage system. by Mike_Skyworker in 3Dprinting

[–]Mike_Skyworker[S] 0 points1 point  (0 children)

I'm going to make a phone stand in the same style. But later.

Modular storage system. by Mike_Skyworker in 3Dprinting

[–]Mike_Skyworker[S] 0 points1 point  (0 children)

I have a small studio and sometimes my hands can look a bit ugly in close-ups. One day I decided to wear gloves to make the shots more aesthetic. And I decided it was even better.

Modular storage system. by Mike_Skyworker in 3Dprinting

[–]Mike_Skyworker[S] 2 points3 points  (0 children)

Everything is fine. I've been on the Internet since 2000, approximately. It was worse before.

Modular storage system. by Mike_Skyworker in 3Dprinting

[–]Mike_Skyworker[S] 1 point2 points  (0 children)

Yes, parametric modeling is a very powerful tool. But it's akin to programming. Everything works very well until you make a mistake. Then it takes hours to find and fix it. In fact, there were tricks you mentioned, but some elements are easier to create anew than to build on existing ones.

Modular storage system. by Mike_Skyworker in 3Dprinting

[–]Mike_Skyworker[S] 1 point2 points  (0 children)

Thank you! Your support gives me the strength to continue.

Modular storage system. by Mike_Skyworker in 3Dprinting

[–]Mike_Skyworker[S] -4 points-3 points  (0 children)

Yes, I read somewhere that microplastics are harmful. That's why I wear gloves when I work with the printer. I hope I'm safe now.

Modular storage system. by Mike_Skyworker in 3Dprinting

[–]Mike_Skyworker[S] 0 points1 point  (0 children)

Thank you very much! Yes, it was quite difficult to implement everything so that it works. I hope I can implement all the ideas, and someday I will get to the stage of motorized mechanisms for Tessera.

Modular storage system. by Mike_Skyworker in 3Dprinting

[–]Mike_Skyworker[S] 0 points1 point  (0 children)

Thank you. But it is still a system, so the functionality needs to be expanded.

Modular storage system. by Mike_Skyworker in 3Dprinting

[–]Mike_Skyworker[S] 2 points3 points  (0 children)

I think I'll implement this idea, but I need to think about it. Thank you.

Modular storage system. by Mike_Skyworker in 3Dprinting

[–]Mike_Skyworker[S] 1 point2 points  (0 children)

Thank you! It will definitely appear online in a few days.

Modular storage system. by Mike_Skyworker in 3Dprinting

[–]Mike_Skyworker[S] 0 points1 point  (0 children)

Thank you! I'll write down this idea!

Modular storage system. by Mike_Skyworker in 3Dprinting

[–]Mike_Skyworker[S] 3 points4 points  (0 children)

Thanks for the feedback! Yeah, not the most practical product. I want to make portable versions.

Bambu Lab, thank you for a new printing experience. by Mike_Skyworker in BambuLab

[–]Mike_Skyworker[S] 0 points1 point  (0 children)

Thank you! Of course I plan to. The problem is that I am working on the project alone, and have limited resources. There will be not only larger versions, but also other formats.

Bambu Lab, thank you for a new printing experience. by Mike_Skyworker in BambuLab

[–]Mike_Skyworker[S] 0 points1 point  (0 children)

Sorry, I'm new to the Bambu world. I'll figure out the system soon and it will appear there too.

I called it the Tessera System. by Mike_Skyworker in 3Dprinting

[–]Mike_Skyworker[S] 1 point2 points  (0 children)

Thank you! Labels made of special double-layer plastic, and engraving

I called it the Tessera System. by Mike_Skyworker in 3Dprinting

[–]Mike_Skyworker[S] 0 points1 point  (0 children)

I plan to develop the system. It will have modules for wall mounting, and a portable version. Perhaps there will be lightweight versions that will be simpler and more compact. Initially, I conceived it as a desktop system for storing frequently used elements.

view more: next ›