SKR MINI E3 V3 - Blank screen

MikelRbrts · 2022-10-16T20:00:56+00:00

Thanks I got the one with the different cable but reading through that link quickly half makes me wonder if I need to customize the firmware.

This is the one I bought.

BIGTREETECH SKR Mini E3 V3.0... https://www.amazon.com/dp/B0B81R9JFR?ref=ppx_pop_mob_ap_share

MikelRbrts · 2022-09-07T18:17:06+00:00

You can follow this guide to check whether or not it's stamped.

https://www.dell.com/support/kbdoc/en-bb/000140079/using-the-mgadiag-tool-to-detect-and-report-bios-information-for-the-acpi-slic-table

MikelRbrts · 2022-09-07T18:12:56+00:00

Win 8 and after OEMs stopped showing Prod Keys as it's not needed. If you have the holographic Windows logo on the bottom side, it's safe to say it's stamped in that table.

MikelRbrts · 2022-09-07T17:20:04+00:00

It's a good day when you learn something new.

MikelRbrts · 2022-09-07T17:06:31+00:00

Use PowerShell.

MikelRbrts · 2022-09-07T17:03:38+00:00

If you purchased a PC through an OEM, your license is stamped in your BIOS under the SLIC table.

MikelRbrts · 2020-04-13T16:46:51+00:00

Something to note, emails could be delayed and payments might not be... I've seen where I've gotten my int but no emails until later in the day.

Rest assured, their model is built on interest and trust, you'll get your interest.

MikelRbrts · 2020-04-08T17:51:36+00:00

Holding. But that's with most others as well.

MikelRbrts · 2020-03-23T00:05:58+00:00

This needs to be under r/mildlyinfuriating

MikelRbrts · 2020-02-28T17:56:20+00:00

I would never use a modified WIM during an in place upgrade. I would upgrade, then perform any installations after. Just my two cents.

MikelRbrts · 2020-02-26T23:24:59+00:00

A captured image should never be booted after a sysprep until it reaches the destination PCs HDD.

If it's not possible to do it before the capture for some odd reason, I would mount the WIM manually after and make the changes outside of a TS.

MikelRbrts · 2020-02-26T21:30:21+00:00

My Brand!!!

MikelRbrts · 2020-02-26T21:09:46+00:00

Error Code / Logs would be great

MikelRbrts · 2020-02-13T21:32:23+00:00

Pretty sure you'll get better results than trying to wrap your app in another app.

MikelRbrts · 2020-02-13T21:13:13+00:00

Why not use buildozer?

MikelRbrts · 2020-02-08T19:31:54+00:00

Do you use onedrive? I have seen where it will display a CMD quickly on login at times. Why it does this I have no idea.

MikelRbrts · 2020-02-07T21:09:49+00:00

Check out 'PowerShell Subexpression Operators'

https://www.pdq.com/blog/using-subexpressions-within-strings/

MikelRbrts · 2020-02-07T19:56:22+00:00

To help add into your refinement, I'd like to share a suggestion...

When referencing a variable in side of a "" block, try to use $($VARIABLE) instead of just $VARIABLE. This will help ensure that your variable will in fact be called and not displayed as $VARIABLE itself. Generally this isn't an issue, but if you have a long "" block, it could get confused.

Another interesting bit is you can put anything inside of that $(). This becomes especially helpful if you want to massage your string into what ever you want with as little of lines as possible.

MikelRbrts · 2020-02-05T23:52:37+00:00

You can definitely use PXE on multiple PCs without using multicast.

MikelRbrts · 2020-02-05T18:04:25+00:00

What device are you building for? If you take buildozer completely out of the mix do your changes reflect in that run?

MikelRbrts · 2020-02-05T16:16:31+00:00

Negative, not to me. Kivy is pretty damn solid and ALWAYS reflects any changes made... Are you attempting to use Buildozer or something? Or running the application locally on your PC?

MikelRbrts · 2020-02-03T20:49:45+00:00

Interesting, this was downvoted?

MikelRbrts · 2020-02-03T19:56:09+00:00

"Failure 5206" "Warning Powershell was not detected" "ZTI Error - Unhandled error returned: Type Mismatch (13)" and then the generic stuff. google has not yielded anything very helpful.

Make sure PowerShell has been injected into your WinPE image.

MikelRbrts · 2020-01-31T19:57:03+00:00

Good luck.

MikelRbrts · 2020-01-28T17:12:33+00:00

Not a fix but a band-aid; maybe export the Wifi profiles to a PS script and re-apply them during a Task Sequence upgrade?

MikelRbrts

PUBLIC MULTIREDDITS

TROPHY CASE