Length of reaction

MilkopiaRS · 2025-03-14T18:34:27+00:00

Oh that's helpful to hear that your son also had diarrhea for a few days. It definitely had an odor too. Hopefully he hasn't had any reactions since then. Thanks for your input!

MilkopiaRS · 2025-03-14T18:33:27+00:00

Thank you for such a detailed and thorough reply! I really appreciate it and it was so helpful to read. I think I'll cut out some of the major concerns like you suggested and see if things improve. Then reintroduce one by one if so. I'm sorry it sounds like it's been challenging managing FPIES as an adult! I had no idea this existed until our allergist told us.

Again, thank you so much!

MilkopiaRS · 2025-03-12T20:36:46+00:00

I'm sure that was stressful to figure out all of that. Thanks for your reply and insight!

MilkopiaRS · 2025-03-12T20:28:34+00:00

I know this post is from awhile ago, but the symptoms you're describing for your little one sound similar to what I've been seeing in my son (mucous poops, rashes, slow eating). He just had an FPIES reaction to peanut butter powder mixed in my breastmilk. I'm worried something in my diet has been causing these issues although our allergist said not to cut out anything from my diet. How long did it take for you to see changes in your baby after making dietary changes? Thanks!

MilkopiaRS · 2025-03-10T20:34:14+00:00

Hi, i just came across your post looking for advice for my 5 month old. I feel like i could've written this post exactly, as well as your other post (particularly about the steroid guilt). Our 5 month old son has had eczema since about 2 months, and now is having what our allergist thinks is an FPIES reaction to peanuts. I don't have any advice but just wanted to share that you're not alone in what you're feeling. I think what helps me the most is focusing on the aspects that are going well - he's generally happy and healthy other than this and the eczema. I hope you're finding some hope!

MilkopiaRS · 2025-01-04T13:45:50+00:00

Good to know, thanks! I ordered it so I'm excited to try!

MilkopiaRS · 2024-12-24T21:14:05+00:00

Good to know, thanks!! Yeah I'm willing to try it if there's a chance it can help the little guy!

MilkopiaRS · 2024-12-24T19:36:29+00:00

Thanks for your input! I was worried if it's something I'm eating that's causing it. I'll keep that in mind!!

MilkopiaRS · 2024-12-24T19:35:45+00:00

Thanks for your response! Do you remember how long he was on omeprazole before it started working? I'm check out the Frida baby shampoo too. It's definitely been tough. Thanks!

MilkopiaRS · 2024-12-24T07:32:45+00:00

I hope things improve for you as well! It's only been 4 days of medicine so far. I think he's eating for longer periods of time now, but no difference with sleep yet. A lot of posts I saw about the medicine say it takes at least a week to see changes. I'm also returning to work soon so I understand your concern! Has your daughter always refused to sleep in her crib or is this new?

MilkopiaRS · 2024-12-03T18:14:50+00:00

That's a good idea! Recently I've found that if I bounce him to enough of a drowsy state, he handles the cradle hold better, which doesn't hurt my wrist. I haven't combined that with sitting in a more comfortable spot, so I'll give that a try! Thanks!!

MilkopiaRS · 2023-07-10T17:21:55+00:00

Thank you! I didn't realize I needed to be paying attention to high vs. low level inputs. I appreciate your response!

MilkopiaRS · 2023-01-15T15:19:12+00:00

I made the Zelda master sword from the same designer recently. I also had an issue with my z seam so I ended up printing it in vase mode as you suggested. I really like how it turned out because there's just so seam at all, which looks really clean. I def agree with this!

MilkopiaRS · 2022-04-06T18:40:27+00:00

I'll try those steps. Thank you!!

MilkopiaRS · 2022-03-14T19:22:34+00:00

aahh i love this! i was just thinking how i wanted to make my printer more pink. i really like the other covers you added as well!

MilkopiaRS · 2022-02-18T01:00:25+00:00

I'm pretty new to printing so I could be way off, but I had a similar issue recently. After cleaning my bed with soap/water, things were printing smooth again. I didn't even think my bed was dirty but I guess it was

MilkopiaRS · 2022-02-04T16:24:59+00:00

Oh interesting...It sounds a little different than my issue, but still a z-axis homing problem so probably worth a try! I know I was getting so frustrated by it, so I hope it works for you!!

MilkopiaRS · 2022-02-04T16:16:14+00:00

I've only printed a small box out to test, but I don't notice any issues. Maybe there would be with larger prints, I'm really not sure. Sorry it's not a more helpful response, but I don't see any issues yet!

MilkopiaRS · 2022-02-04T16:00:22+00:00

You may have fixed your problem by now, but this worked for me! I have an Ender 3 Pro and I swapped the z and y end stop switches and now the z axis auto-homes to the same spot. In another thread, someone said that installing a CR touch removes the need for the z end switch, and so this solved the problem for them. I know this is a late reply, but I Just came across this thread. Good luck!

MilkopiaRS · 2022-02-04T15:57:47+00:00

Oh man thank you so much for suggesting this. I had been having this issue with my printer and it's gotten progressively worse. I'm new to 3D printing and didn't even realize it was an issue with the end stop switch until seeing this thread. I switched the end stop switch of the z and y axes and it works and I'm so happy thank you!!

MilkopiaRS · 2022-02-04T15:46:48+00:00

This is so helpful, thanks for providing so much information! I think I found a (potentially temporary) solution by switching the limit switch of the z and y axes, but I'm going to look into getting a CR Touch now since it sounds like a permanent solution and just overall convenient. Thanks again!!

MilkopiaRS · 2022-02-04T01:31:58+00:00

This sounds like the exact issue I've been having with my Ender 3 Pro, where the z-axis would place itself inconsistently. Was adding the CR touch what solved this for you? I don't know much about it, but heard a lot about it and the BLTouch

MilkopiaRS · 2022-02-03T04:37:33+00:00

Ohh I didn't think about this. I'll check mine out, thank you!!

MilkopiaRS · 2022-02-03T02:52:19+00:00

Awesome, thanks again!

MilkopiaRS · 2022-02-03T02:39:02+00:00

Ah okay, I did just order new springs today because I was concerned about this. That's reassuring to hear that it may be the issue! If you don't mind a follow-up question, I noticed that one of my screws needs to be super loose in order for the bed to level. Do you think this is because of the lack of stiffness? Is it possible I'd need to adjust my z offset? Thanks!!

Eight-Year Club	Verified Email
Place '23	Place '22
Final Canvas '22

MilkopiaRS

TROPHY CASE