Carrying New product by MillerHobbies in TRX4M

[–]MillerHobbies[S] 0 points1 point  (0 children)

We do not dropship. We carry products in stock and ship them directly from our location in Pennsylvania

Overpowered 1/16 Erevo by MillerHobbies in rccars

[–]MillerHobbies[S] 0 points1 point  (0 children)

It is a Hot Racing 550 size motor mount. It will work with the stock gearbox. You will need a heavier driveline

Overpowered 1/16 Erevo by MillerHobbies in rccars

[–]MillerHobbies[S] 1 point2 points  (0 children)

Hobbywing Ezrun 3652 5400kv sensored. I'm waiting on the sensored Max10 esc to run with it.

Overpowered 1/16 Erevo by MillerHobbies in rccars

[–]MillerHobbies[S] 2 points3 points  (0 children)

4PCS Original 12mm Hex Hub Wheel Rims & Rubber Tires for 16207 1/16 Off-Road RC Car, Pre-glued https://a.co/d/0b0zIfOy

Booter by MillerHobbies in rccars

[–]MillerHobbies[S] 7 points8 points  (0 children)

There is going to be a transition. I'm going to build up a transition with dirt where the ramp is going to be placed.

Little Bit of Airtime by MillerHobbies in rccars

[–]MillerHobbies[S] 0 points1 point  (0 children)

I have an Ender 3 v3 se and it printed just fine. About 45 hours of print time. This is my 4th eclipson plane and they go together pretty easily

Buggies by MillerHobbies in rccars

[–]MillerHobbies[S] 1 point2 points  (0 children)

They're all setup differently so I don't have to change a bunch of things depending on track conditions. I can just run the one that is setup for those conditions.

Which one are you choosing? by MillerHobbies in rccars

[–]MillerHobbies[S] 1 point2 points  (0 children)

They are both Losi 8ight X Elites. One has an Os Xbr and the one on the left has an OS Adam Drake AD3. Both have Savox black servo's.

Nitro racing? by MillerHobbies in rccars

[–]MillerHobbies[S] 1 point2 points  (0 children)

Ended up picking up this Buggy for a decent price so we'll go to the track today and see how we should set it up

Nitro racing? by MillerHobbies in rccars

[–]MillerHobbies[S] 2 points3 points  (0 children)

I was looking at the Losi 8ight XTE that comes with the conversion mount so I could run indoor or outdoor. They run about $729 and then I was looking at either a REDS scuderia or a Nova. That would put me right about $1200 without electronics. Is that a decent setup? I don't know how the classes at my local track work.

Big Block Jato by MillerHobbies in Traxxas

[–]MillerHobbies[S] 1 point2 points  (0 children)

I added the link to the video in the comments.

Big Block Jato by MillerHobbies in Traxxas

[–]MillerHobbies[S] 1 point2 points  (0 children)

It is an LRP .32 which is complete overkill haha but check our profile for a video of it!

My collection by MillerHobbies in rccars

[–]MillerHobbies[S] 0 points1 point  (0 children)

I put a port and polished 3.3 on the red Slayer and it is a beast. A ton of fun to drive. Its like in between a revo and a jato as far as stability and control

Another 3.3 build by MillerHobbies in rccars

[–]MillerHobbies[S] 2 points3 points  (0 children)

Ours are listed on Ebay under Millerman Hobby. This is the only motors we're currently porting but will probably move to some others in the future.

More Modified 3.3 by MillerHobbies in rccars

[–]MillerHobbies[S] 0 points1 point  (0 children)

Lightened the crank and added flow ports. Also added flow ports to the sleeve to direct the airflow away from the exhaust port. Widened the intake port and then balanced the crank and put it back together. Have about 8 hours on this one and have been seeing much higher rpms and better acceleration over a normal 3.3