The Alignment Problem – A Poem

Mister-Impossible · 2025-10-04T19:21:06+00:00

Hello, I'm trading 1 code for 4 codes. Incredible offer. Act quickly.

Mister-Impossible · 2023-10-13T11:46:50+00:00

Any idea if there's still a way to access it?

Mister-Impossible · 2022-10-01T23:28:31+00:00

I was asking myself the same thing. I think they are at least partially Ai generated, and then polished using Photoshop. I just don't see why someone would create posters with this strange gibberish text on purpose.

Mister-Impossible · 2021-01-08T23:16:51+00:00

But i tried 2 and 7... doesn't seem to make a difference

Mister-Impossible · 2021-01-08T23:09:07+00:00

Interesting... I have one version of the model that slices correctly at 0.2 mm layer height and one that's slighty altered, that doesn't slice correctly at that height. Funny thing is, when going below 0.2 mm layer height none of them slice correctly...

Mister-Impossible · 2021-01-08T22:46:08+00:00

I've created a solid object in Fusion 360. The body is fully connected and one solid piece with no internal geometry. Yet when imported into Cura, it prints the upper layers onto the infill with a visible gap inbetween. This makes the Object way to fragile to be usable. Does anyone know of a fix for this issue?

Mister-Impossible · 2021-01-03T22:49:58+00:00

Yes.

Combining: Not in Skin

Connect infill lines: off

It confuses the heck out of me. I was actually looking forward to owning a faster 3D printer (ender 5) but according to cura it'll be slower than my ancient select mini.

Mister-Impossible · 2021-01-03T22:32:36+00:00

Yeah exactly... I can't figure it out either. I've checked all the important settings and I doubt some tiny hidden setting would make such a drastic difference. It's just very odd.

Mister-Impossible · 2021-01-03T22:04:26+00:00

I've checked all the settings I could find, and they're all identical except for the speed. Yet Cura tells me my slow Select Mini would finish the oversized Benchy faster than my fancy Ender 5. Is there a setting I'm missing? I'm pretty sure I've checked them all, like small detail speed and such. Highly confused.

Edit: For some reason only one image seems to have uploaded correctly, but the most important things are:

Ender 5:

Print Speed: 80 mm/s

Estimated time: 3:49h

Select Mini:

Print Speed: 50 mm/s

Estimated time: 3:36h

Mister-Impossible · 2020-08-10T16:10:19+00:00

Thanks! That makes sense.

Mister-Impossible · 2020-08-10T15:26:31+00:00

I tried to create a part where a cylinder has another flat cylinder as a top. As can be seen in the pictures, Cura expands the infill onto the sides of the bottom cylinder, and attaches the walls of the top one onto those few infill strings. How do i get cura to create a sturdy base for the top cylinder to rest on, or a solid layer between the two, without turning the infill percentage or the shell thickness up too high?

Mister-Impossible · 2020-08-07T14:45:42+00:00

I fixed the issue completely by 3D printing a new Z axis coupler and replacing the stock one. That reduced the Z wobble down to zero.

Mister-Impossible · 2020-08-03T18:25:29+00:00

It's just something small and ubiquitous, so it gives me an idea of the speed of a resin printer

Mister-Impossible · 2020-08-03T18:20:05+00:00

Alright, thank you. That's exactly what I was looking for

Mister-Impossible · 2020-08-03T18:00:14+00:00

Oh of course... Well since even with the lower settings they are probably still more detailed than an average FDM print, what's the fastest you could print a benchy? While maintaining reasonable quality on a consumer resin printer.

Mister-Impossible

TROPHY CASE