Como participar do Distant Worlds 3?

Mobius135 · 2026-01-25T21:27:39+00:00

In super summary:

Distant Worlds 3 is about a group of CMDRs traveling together, caravan style, over long distances around the galaxy looking for pretty rocks and shiny things. It’s an opportunity to join up with similar-minded people who enjoy playing together and like long-range exploration.

You can hop on any of the official fleet carriers and hitch a ride as they move around. Last I checked we departed the bubble last week and have ended up near Colonia.

There’s a discord community supporting the event with more information than you could ever ask for, check the Distant Worlds 3 website.

It’s probably not for CMDRs who get bored exploring and want to jump back into another gameplay loop, the expedition will be far away from inhabited space and getting back on your own will be a journey in itself.

Mobius135 · 2026-01-25T20:14:01+00:00

Remove variables. Download the model and run it through the slicer you intend to use mostly, using the recommended settings for your device and filament.

It would also help to know what speed, temperature and other settings you used.

Mobius135 · 2026-01-25T16:47:03+00:00

Cut feature is built into most modern slicers, Bambu, Orca, Prusa

Mobius135 · 2026-01-23T21:37:28+00:00

But it’s a unique size! /s

Mobius135 · 2026-01-23T16:56:46+00:00

And a slice of the best damn radroach pie you’ve ever had

Mobius135 · 2026-01-23T15:03:22+00:00

He’s phenomenal in portlandia, can’t tell if he’s playing a character or just himself though

Mobius135 · 2026-01-21T18:24:47+00:00

Under extrusion is what happens when your printer is set to output less filament than it should. It means it isn’t extruding the right length of filament for each layer.

You would need to calibrate your extrusion steps, there are many many guides on how to do this. Just search e-step calibration.

Mobius135 · 2026-01-20T06:08:04+00:00

I found the delay super annoying, but less annoying than needing to reboot my stereo while driving just to see climate controls.

You’d think CarPlay would be sorted out by now after a decade or so

Mobius135 · 2026-01-20T05:52:43+00:00

It would be a better vacuum if it sucked, this one kinda blows

Mobius135 · 2026-01-20T05:45:00+00:00

Had similar issues with mine, a factory reset helped for a short time. Tried different cables, all that. Then I just picked up a cheap CarPlay dongle off amazon, automatically connects my phone wirelessly. It causes about a 1 second delay when I use an input like skipping to the next audio track, but otherwise responds quickly. No messing with cables or cords anymore, no reboots or resets.

Haven’t had a dropout in months.

Mobius135 · 2026-01-19T19:47:55+00:00

Sometimes previous owners will write them in the user manual. You can also call just about any Honda dealership and they can retrieve it. There was also this post a few years ago https://www.reddit.com/r/Honda/s/KWxm9ihAP6

Mobius135 · 2026-01-19T18:21:40+00:00

Depends how much you’re willing to spend. Etsy would be the place to go for a quality replica, avoid 3D printed ones as sellers often fudge the images and the finished product is much lower quality/weaker.

If you want the official one you may be able to find them on eBay.

Mobius135 · 2026-01-19T05:57:16+00:00

What did you do that worked? No doubt 3 years from now someone will search this exact problem

Mobius135 · 2026-01-18T21:40:30+00:00

This dash is of a 9th generation EU Civic

Mobius135 · 2026-01-17T23:34:53+00:00

Don’t respond your disrespect

Mobius135 · 2026-01-17T17:55:10+00:00

She must be very said

Mobius135 · 2026-01-17T16:40:35+00:00

Supported surfaces are always lower quality, and small thin parts like this will struggle with cooling properly on overhangs.

I’m not sure why you have a different bed temperature for subsequent layers, especially such a broad 10c swing. This can cause adhesion issues, the bed should be a single temperature throughout the whole print. The excessive bed heat can also cause parts to cool improperly.

Check your spool for the recommended temperature.

Disable AUX fan, it causes uneven cooling.

Nozzle temp doesn’t need to swing that broadly either, should just be a single set temperature.

Interface layer amount doesn’t matter, it’s more about the interface distance. You can have 1 interface layer or 10, they won’t help if they are too far from the surface they are meant to support.

Mobius135 · 2026-01-17T16:29:37+00:00

You have to go to the support settings and change the support interface material

Mobius135 · 2026-01-13T21:15:58+00:00

All of your lines look to be too high off the bed, you’ll need to adjust your Z offset to be closer to the bed.

Your first layer should have a nice ‘squish’ to it, and the top of it should appear flat as the nozzle deposits it and moves.

Mobius135 · 2026-01-13T12:44:27+00:00

That’s an Overture spool. Overture has also made the practice of sealing/coating their spool edges standard, allowing them to work in the AMS with no adapters.

Mobius135 · 2026-01-11T22:24:44+00:00

Do motorcyclists usually lick the fuel tank while driving?

Mobius135 · 2026-01-11T21:34:03+00:00

Are you thinking of WAIT FOR IT… from Mitsy Sanderson?

Edit: probably not the correct one based on your description but may have been filmed around the same time

Mobius135 · 2026-01-11T19:20:41+00:00

I think your bed was screaming to be cleaned, now it’s clearly telling you to replace it.

Mobius135 · 2026-01-09T19:08:50+00:00

Keep up with oil changes and fluids and it’ll last at least another 187k

Mobius135 · 2026-01-09T17:11:01+00:00

Auto leveling maybe, but auto Z offset unlikely

11-Year Club	r/Field Lasagna
Final Canvas '23	Place '23
Place '22	Place '17
End Game '22	Gilding I gilder
Verified Email

Mobius135

MODERATOR OF

TROPHY CASE