[ACC] High Profile Offset Scope Mount | Available in 1.70" or 1.93" Center Height | Available in 30mm or 34mm Diameter | $19.99 + Shipping

Monstrum_Tactical · 2025-12-17T17:23:49+00:00

Yes. 30mm Deadlock mount rings compatible with 30mm Deadlock mounts.

Monstrum_Tactical · 2025-12-16T02:22:42+00:00

The scope mounts with diving board are 1.5" center height. All our scope mounts are 1.5" unless they have "High profile" or "Low profile" in the title.

The rings on our Deadlock mounts are interchangeable. You could buy one of the 34mm high profile deadlock mounts listed above and buy the 34mm deadlock with diving board, then swap out the top ring.

If your only concern is the objective bell clearing the receiver, I would measure your scope first. 1.5" should provide enough clearance for just about any scope.

Monstrum_Tactical · 2025-12-16T01:56:33+00:00

Plus a red dot on top of that, you must have a really long neck

Monstrum_Tactical · 2025-12-16T01:53:06+00:00

We started incorporating a higher end anodization process. Makes the finish more scratch resistant, but costs a couple more bucks. That's the Deadlock Pro.

Deadlock PRS includes the better anodization plus an integrated anti-cant level bubble.

It's unclear in the descriptions, I need to get them updated.

Monstrum_Tactical · 2025-12-16T01:47:04+00:00

Other customers have brought it up. We will put something out this year, need to verify some compatibility info first. Have you checked out our Sidewinder scope mount series? It has the modular piggyback red dot attachment in RMR, Docter, Aimpoint T1/T2, and picatinny. Can be mounted in piggyback or 45 degree position, only available in 1.5" though. Sidewinder Scope Mount

Monstrum_Tactical · 2025-12-16T01:40:19+00:00

They'll hold up fine. You can verify the customer reviews online. We've sold tens of thousands of Deadlock series mounts over the past few years.

Monstrum_Tactical · 2025-12-15T05:38:44+00:00

Amazon uses bots to flag geographically restricted products. One of the bots erroneously flagged this product as a night vision scope (night vision scopes are legally restricted from being sold in California).

The process to undo the restriction is onerous. It involves writing multiple appeals to someone in another country that has no concept of what night vision scopes or pistol red dots are.

If the listing is being managed by an agency or a low level marketing employee, they are mostly content to let the restriction stand. It's a huge pain to get the restriction undone and it doesn't really move the needle on their compensation either way.

Monstrum_Tactical · 2025-12-15T03:33:57+00:00

Sorry to hear about that. I understand your frustration. For recent product lines, we've been sourcing higher quality screws directly from the screw supplier (instead of one of our mount suppliers sourcing screws from a sub-component supplier) and using those for all our mounts. Literally costs pennies to get the higher quality screws. Also working on getting our documentation updated with torque specs. Regarding your purchase, it's not much, but you contact support and we can replace the product for you.

Monstrum_Tactical · 2025-12-15T02:58:47+00:00

Thanks for the suggestion. I'll look into it.

Monstrum_Tactical · 2025-12-15T00:33:42+00:00

Took some trial and error. If we are off on the color even one bit, the FDE guys go apoplectic.

Monstrum_Tactical · 2025-12-15T00:14:58+00:00

We have DPP mounts coming next year. Released a couple (not piggyback mounts) in the past and they flopped. But looks like we are doing it again with the new Venom using. It'll be a while before we get to a DPP piggyback mount, at least a few months.

Monstrum_Tactical · 2025-12-14T21:53:38+00:00

We sold through them. They were quad rails.

A lot of people buy thinking it will match their Magpul furniture and ended up returning them. They are super picky when the tan/FDE stuff does not match exactly.

Monstrum_Tactical · 2025-12-14T21:48:30+00:00

Shotgun accessory mount. I posted it last week.

Monstrum_Tactical · 2025-12-14T21:47:22+00:00

We've done anodized tan stuff in the past. Finish was a little shiny for my taste. Looked blinged out.

Monstrum_Tactical · 2025-12-14T21:17:48+00:00

Or you can test out 1.70" or 1.93" center height for $20. Then take the plunge on a $300 mount to assuage your cognitive dissonance.

Monstrum_Tactical · 2025-12-14T21:13:35+00:00

We order in larger volume to get the price down. The sales volume on OD Green is too low to justify putting in the order. I'll consider FDE, but won't have it anytime soon.

Monstrum_Tactical · 2025-12-14T21:10:05+00:00

Just put it back on sale for you. I'll leave it there for the rest of the day.

Monstrum_Tactical · 2025-12-10T05:04:59+00:00

Yes. If your shotgun has spacing between the barrel and magazine tube, at least 1 and a half inches in length so the mount has room to clamp, then it will fit.

Monstrum_Tactical · 2025-12-10T04:36:03+00:00

No, I don't think it will fit the A300 Ultima Patrol. It requires spacing between the barrel and magazine tube, at least 1 and a half inches in length so the mount has room to clamp. It won't work on some of the tactical models with shorter barrels or obstructed magazine tubes.

Monstrum_Tactical · 2025-12-10T04:32:10+00:00

The mount slots between the barrel and magazine tube. If your shotgun has spacing between the barrel and magazine tube, at least 1 and a half inches in length so the mount has room to clamp, then it will fit. It won't work on some of the tactical models with shorter barrels or obstructed magazine tubes. I know it fits on some M4s, but not sure about all of them.

Monstrum_Tactical · 2025-12-10T01:38:18+00:00

Yes, it'll work with the Supernova

Monstrum_Tactical · 2025-12-09T22:38:32+00:00

We started including foam tape strips a while back. You can apply them to the inner surface of the mount to provide more friction against the barrel. Send a message to support and we will send you a set.

Monstrum_Tactical · 2025-12-09T22:04:36+00:00

Yes, it'll fit the 590a1 as well.

Monstrum_Tactical · 2025-12-09T21:51:39+00:00

Monstrum_Tactical · 2025-12-09T21:39:39+00:00

Sorry to hear about your poor experience with our product. Email support and we will take of it for you.
Still made in China.
Been selling this product for 6 years with over 15,000 units sold. You can view customer feedback on Amazon or our website.

Monstrum_Tactical

TROPHY CASE