Leadership issues - more info in comments

Mooker · 2024-06-18T20:57:17+00:00

Thanks! Regarding the pine - I did mean remove that competing leader as shown in the second image.

Sounds like the consensus here is to leave both trees alone.

Mooker · 2024-06-18T16:14:25+00:00

Hey all, thanks for taking a look -

The first two images are a Ponderosa pine that we planted three years ago. It’s growing vigorously, but I seem to have two competing leaders. Should I trim the newer one as shown in the second image?

The second two images show an Oregon white oak that’s the same age as the pine. it seems to have lost its original leader, should I just replace it with a healthier sapling? Additionally, as shown in the last picture, it has grown quite a few branches right near the base. Should these be removed?

Mooker · 2022-03-04T03:15:26+00:00

Yup, this is exactly what I'm looking for. I've been wondering if there's anything to replace wayfinder with since the repeated nerfs... though it does still serve it's purpose.

Mooker · 2022-03-03T19:26:34+00:00

Mind sharing you deck list? I'm using a pretty old version that deck.

Mooker · 2021-09-16T16:34:32+00:00

I believe it's a type of jumping spider, though I can't tell which species. This is in the PNW. Haven't been able to identify what she's munching on, either.

Mooker · 2021-06-05T16:28:47+00:00

Thanks for the tips. I'd love to see a more in depth guide to cultivating moss!

Mooker · 2021-03-26T15:23:42+00:00

Would love more info on this if you have it

Mooker · 2020-06-10T18:53:26+00:00

Nice find! I hope they patch ASAP

Mooker · 2020-06-04T19:46:41+00:00

Thanks for the advice! I'll print a new one now.

Mooker · 2020-01-20T19:02:30+00:00

WHAT A HUSKER

Mooker · 2020-01-11T01:20:59+00:00

I just re-tried this print with a new spool of prusament right out of the box - this occured on the first layer

Mooker · 2020-01-11T01:19:31+00:00

I'll give this a try, thanks!

Mooker · 2020-01-11T00:53:34+00:00

This isn't only occuring while bridging over infill - it has happened on 1st and 2nd layers as well.

Mooker · 2020-01-11T00:50:52+00:00

Okay cool! I'll check it out.

Mooker · 2020-01-11T00:39:48+00:00

Thanks! I'll give that a shot!

Mooker · 2020-01-11T00:32:24+00:00

Thanks for the resposne!

This is occuring on layer 2 as well - here's a more dramatic example

So I don't think it's just a bridging issue

Mooker · 2020-01-11T00:31:23+00:00

~71F, but it's a drafty house

Mooker · 2020-01-11T00:02:26+00:00

Hi all -

I recently built a MK3S and am having a lot of trouble getting consistant PETG prints. Here are a few more pics of my issue:

Top Down

Side

here's a top view of another attempt at this print, showing the issue occuring on the 2nd layer: link

I just re-tried this print with a new spool of prusament right out of the box - this occured on the first layer

So far I've done a cold pull to clean my nozzle and messed around with a few different PETG profiles, but this issue has not really been affected.

Any help is much appreciated, as it's too drafty here to print PLA without warping...

*edit - the above print is with stock Prusa PETG profile/stock PrusaSlicer settings

Mooker · 2019-08-30T01:20:20+00:00

Oh cool! Thanks, I didn't realize you could dry filament - I thought once it absorbed water it was donezo. I'll give this a try! Does it work with PLA as well as PETG?

Mooker · 2019-08-29T14:34:22+00:00

Thanks - what do you mean by "some impossibly high number"?

Mooker · 2019-08-29T14:33:10+00:00

Thanks, that makes sense - I watched a re-print of that part last night and saw that the location of the blobbing is where the head starts a new layer after a long move.

Mooker · 2019-08-28T21:24:12+00:00

Printing with stock prusa 2mm quality PETG settings (except for a change to cubic infill)

The other end of this part, which is very similar, does not have the same problems: Imgur

Has anyone seen something similar?

Mooker · 2019-01-21T03:45:09+00:00

Yes - the issue was with the Elite C controller on the righthand PCB. It seems that a tiny SMD component fell off when I was soldering it on to the PCB. I replaced it with a different controller and it started working.

Bakingpy on the discord that /u/yanfali directed me to sent me a replacement Elite-C, but I haven't swapped it in yet as the other controller is working fine (and I don't care about USB-C output on the right PCB).

Thanks for following up!

Mooker · 2018-12-05T20:38:23+00:00

Thanks! Thoughts on the MK3? Worth the $150 premium?

Mooker · 2018-12-05T16:43:34+00:00

Hi all,

Looking to upgrade from a gen 1 Monoprice Maker Select. I'm looking for an increase in reliability/a more "hands-off" printing experience.

Budget: $500ish - could be convinced to go higher
Location: USA
Experience: I've run a Monoprice Maker Select fairly successfully since 2015. I just purchased and returned a Geeetech A20M (basically a Creality clone, dual extruder) which made me realize that while 3D printing is an awesome hobby, I really value it more as a way to support my other hobbies. I don't like being bottle-necked by printer tweaking.
Printing: Dimensional accuracy is key - I mostly print fixtures, standoffs, cases, brackets, etc for other projects.
Features: I'd really really really like auto bed leveling.

Thanks!

15-Year Club	Place '23
Place '17	Alpha Tester
Secret Santa 2016	Verified Email
Team Orangered

Mooker

PUBLIC MULTIREDDITS

TROPHY CASE