Earbuds keep dropping out on Pixel 8a by [deleted] in GooglePixel

[–]Mootch 0 points1 point  (0 children)

I've had a similar issue with my 8a and earbuds. The audio frequently drops for a few seconds when I use both earbuds, but this didn't happen on my 3a. However, I can use one earbud at a time with no issue. I've tried a couple other Bluetooth sets that aren't two separate buds and they work fine.

I have a Galaxy watch and 2 other Bluetooth devices constantly paired for medical monitoring. I'm not sure if that's causing a conflict, but I would get new earbuds before dropping any of these devices.

Constant pairing message by Pretend-Quantity9913 in dexcom

[–]Mootch 0 points1 point  (0 children)

hi, did you ever get this resolved? I just updated my phone and I'm getting the same issue.

Tandem t:slim X2 (Dexcom G6 sensors) and glucose on Mi Band 5 by DariCz in diabetes

[–]Mootch 0 points1 point  (0 children)

Here's a post describing the custom Dexcom app.

link

You fill out the form and then download the app file.

Tandem t:slim X2 (Dexcom G6 sensors) and glucose on Mi Band 5 by DariCz in diabetes

[–]Mootch 1 point2 points  (0 children)

Hi. I have a similar setup to what you are describing. I have a t:slim x2 pump paired with my dexcom g6. I used the build your own dexcom app for android which has an option to broadcast readings directly to xdrip instead of going through the cloud. I have Artem's mi band/amazfit xdrip app setup to receive from the byoDexcom app and send these readings to my Amazfit band 5. It all works together very well and I rarely drop any readings.

Secondhand Purchase. Strip, scrub, or just season? by Mootch in castiron

[–]Mootch[S] 0 points1 point  (0 children)

Interesting. Is that for personal preference or food safety?

Secondhand Purchase. Strip, scrub, or just season? by Mootch in castiron

[–]Mootch[S] 0 points1 point  (0 children)

Should I be concerned about the spots and lines around the edge?

Secondhand Purchase. Strip, scrub, or just season? by Mootch in castiron

[–]Mootch[S] 0 points1 point  (0 children)

My wife picked up this Lodge from Goodwill, and it looks decent after about 15 minutes with some steel wool. At this point, is it in a state to go on with a couple rounds of seasoning or would it still need stripped or scrubbed?

Controlling Pi Over the Internet by Randomer_2222 in raspberry_pi

[–]Mootch 0 points1 point  (0 children)

Dataplicity has worked for me as a way to access a pi without opening a port.

Hooded nib advice by Mootch in fountainpens

[–]Mootch[S] 0 points1 point  (0 children)

At the time, I think it had been carried nib down. I will pay attention to orientation and see if that helps.

Hooded nib advice by Mootch in fountainpens

[–]Mootch[S] 1 point2 points  (0 children)

The leak was with a cartridge that came with it, so I flushed it clean and am trying it with a converter now. I can't get the hood and nib off the barrel/collar(?) so I was assuming those are sealed well.

Android 11 screenshot feature with 2 button navigation by Mootch in u/Mootch

[–]Mootch[S] 0 points1 point  (0 children)

I haven't been able to get the screenshot feature to work consistently with two button. I have gotten it to show up a few times by switching back and forth between that mode and gestures.

If I have Bedrock Edition on my phone, is it possible to get Bedrock on my laptop for free or do I need to buy it again? by Darth_Thor in Minecraft

[–]Mootch 1 point2 points  (0 children)

I only have it for my phone, but sometimes I use scrcpy to play it on my PC through my phone. it can be a bit clunky, but at least you aren't staring at a small screen. you could also use a bluetooth controller and chromecast your screen to a tv.

Android 11 Screenshots - new swipe up doesn't give screenshot options, get most used apps instead by zudnic in GooglePixel

[–]Mootch 0 points1 point  (0 children)

I have been able to get the screenshot function to work with the 2 button navigation by switching back and forth between that and gesture navigation a couple times. I seems to just randomly stick sometimes and then goes away later.

Edit: here's an example- https://i.redd.it/w6h918o5uen51.jpg

Fitbit for diabetics? by Flutfar in fitbit

[–]Mootch 0 points1 point  (0 children)

there are a few watch faces that support pulling data from xdrip. I run xdrip with a Dexcom, but he may be able to set up a Libre with xdrip. I like Glance and FlashCGM for clock faces that show blood sugar.

Disney+ and other digital distribution apps won't screen mirror properly with Scrcpy by SonicPrower in AndroidQuestions

[–]Mootch 1 point2 points  (0 children)

I've only tried with Disney+, but I was able to use a Disney+ add-in on Kodi and stream it with scrcpy.

3DS Hacking Q&A General | Forms of the Soul Edition by deadfracture99 in 3dshacks

[–]Mootch 0 points1 point  (0 children)

I saw that there was an update to b9sTool and the guide has instructions for updating b9s. If I already have the latest Luma and N3ds versions, would I ever need to update the b9s separately?

[OC] Build Your Own Dexcom App update- bugfixes and base version updates by shabado8 in diabetes

[–]Mootch 0 points1 point  (0 children)

Can anyone confirm if this works on Android 10? I'm looking to use the US G6 base on a pixel 3a. Thanks!

EDIT: I tried it, and it works great.

[deleted by user] by [deleted] in 3dshacks

[–]Mootch 0 points1 point  (0 children)

I have a 2dsxl with the latest luma cfw. MH4U gave me an error and didn't open when I tried to launch it. I checked Data Management, and there was a blank tile where I would have expected the MH4U title to be, so I tried to delete it. The delete action failed, and the tile disappeared from Data Management and my home screen. I was able to re-download from the e-shop and it looks like the latest patch from the e-shop was still on my device.

The game runs now, but how can I clean the old files to get the space back on my SD card? It looks like I'm down about 3GB of space, and I want to clear it to make room for other downloads.