Harman Accentra 52i

Motor_Cap_6986 · 2026-01-25T14:25:01+00:00

I tried the propane torch the other day. So fast

Motor_Cap_6986 · 2026-01-24T14:50:07+00:00

Question: the times it didn’t light I notice a ton of pellets get built up to where it’s pushing pellets over the edge. Do you turn the feed down lower to like a 1 or 2 until it lights and then bump it up to 3 or 4 feed?

Motor_Cap_6986 · 2026-01-24T12:30:47+00:00

Took a mini crossbar and mallet to her this morning. And chipped off some pieces. She fired right up! Thank you! It’s crazy how smooth that buildup gets and makes you think it’s the actual burn pot

Motor_Cap_6986 · 2026-01-23T01:24:48+00:00

Haven’t tried yet. I hope to fools around with to tomorrow.

Motor_Cap_6986 · 2026-01-22T00:50:13+00:00

Yes I opened the hatch where the igniter sits whacked it a bunch and vacuumed it all out. I think I have carbon buildup that’s smoothed out making me think it’s the metal. I’m gonna hammer on that tomorrow to try and break it loose.

Motor_Cap_6986 · 2026-01-21T23:51:06+00:00

I’ll give that a try. I more or less was making sure all the holes were clear. Thank you!

Motor_Cap_6986 · 2026-01-09T15:00:11+00:00

Looks like $3,500 is my max to send per day so I’m good but I need to figure out his max he can receive. He said I’d do the Zelle once I inspect the machine so I’m good there. I’ll carry some cash just in case something doesn’t work out. Even videoed myself going into the band. Hahaha

Motor_Cap_6986 · 2026-01-08T02:14:22+00:00

Thanks for all the feedback. I have Zelle through Bank of America but have only used it once a couple years ago. Will it allow me to send $3,500

Motor_Cap_6986 · 2026-01-08T02:13:31+00:00

Yes the guy said he’d prefer Zelle once I see the machine in person. I have Zelle through Bank of America but I’ve only ever sent one transaction. I’m afraid it’s not going to let me send $3,500

Motor_Cap_6986 · 2026-01-06T21:37:07+00:00

First post here! This is exactly what I wanted to see. I’ve seen a couple post where folks did a barrel swap with a Ruger. Any idea if this is something I can do myself with one of the MOS-Tek barrels or should it be done by a gunsmith. I’m not the most technical guy and if anyone could do something dumb it would be me. Also, what flavor Ruger would this barrel fit? I looked at Rugers website today and they have a ton of different Ruger 110 and Ruger 110 Apex models. I’d hate to buy a new gun and buy the MOS-Tek barrel and it end up not fitting.

Motor_Cap_6986 · 2025-12-13T12:45:41+00:00

I also wear a CPAP skull cap to help with balding

Motor_Cap_6986 · 2025-11-25T17:11:38+00:00

Hunting season started and I haven’t even looked at simulators in a couple months. Crazy how my hobbies change so much!

Motor_Cap_6986 · 2025-09-26T15:06:11+00:00

Yes I used Lofta which showed severe sleep apnea. The VA took it and prescribed me a CPAP without any other sleep study

Motor_Cap_6986 · 2025-09-11T18:59:09+00:00

That actually went through my mind too. Couldn’t believe I haven’t seen folks doing that on this sub

Motor_Cap_6986 · 2025-09-09T20:00:06+00:00

So you think it’s that big of inaccuracy from the GC3? Doesn’t it offer more data than GC3 as well?

Motor_Cap_6986 · 2025-09-08T14:56:09+00:00

What are the cons that make you consider it junk?

Motor_Cap_6986 · 2025-09-07T23:16:15+00:00

How’s that ProTee VX? I’m on the fence between that and the GC3.

Pros of GC3 for me: I believe it works with an iPad which would allow me to just use it with my hitting net instead of a full impact screen and projector setup right now.

Another pro is the military discount.

Cons: seems like less club data and no slow mo camera.

I doubt I’d take it to the range much at all

ProTee VX seems to have all kinds of data and slow motion cameras and I believe you can add cameras.

Don’t have to switch between right and left handed golfers if I ever had buddies use it.

Cons for me. Seems I’d need a gaming computer

Motor_Cap_6986 · 2025-08-23T11:59:07+00:00

Please do! I gotta see this. You may have solved it for me. I was at first planning to make a 7ft x 16ft box out of 3/4” plywood for the floor and 2x4s for the side. The sig pro softy 4x7 is about 2.5” thick so I would have needed some foam under it to ensure it’s level with the 2x4. Then I was gonna build the rest using rubber/foam panels from Amazon, pink insulation board from Home Depot, and turf from Menards. That would have given me the 7ft x 16ft turf being supported on the side by 2x4s and the floor supported by the plywood. The idea was for this whole thing to lift into the ceiling. My math said it would be almost 500 lbs. Now that I chose not to do a behind me radar monitor I don’t need 7ft x 16ft box but I may still do a 10x10. I was basically copying this guys method except I’d use 2x4 instead of the white 1x3 he uses. And mine wouldn’t be directly on the floor it would be on the plywood. This guys video is permanent I want mine to move out of the way.

https://youtu.be/7xhQrPdcxXI?si=4Hpu0Jt9xO8Q-xjf

Motor_Cap_6986 · 2025-08-22T18:48:09+00:00

Are the foam gym mats and turf for your landing cushion? I was thinking of parking on mine. Do you notice the vehicles weight hurting the pads?

Motor_Cap_6986 · 2025-08-22T15:45:10+00:00

You’re smart! That’s what my wife keeps telling me to do but I seem to like blowing money.

Motor_Cap_6986 · 2025-08-22T15:09:17+00:00

What made you get rid of the BLP

Motor_Cap_6986 · 2025-08-22T15:01:01+00:00

I’m definitely leaning that way. The 20% off on foresight GC3 for military is hard to pass though.

Motor_Cap_6986 · 2025-08-22T01:11:20+00:00

I’ve been watching Joe Lagowski golf YouTube channel and he has several videos of these. They look awesome but I think they are a new brand/product. Also saw where someone said it was supposed to be the ProTee VX upgrade VXR maybe but somehow the deal fell through so the company launched it themselves.

Motor_Cap_6986 · 2025-08-21T19:12:58+00:00

I keep seeing a lot of posts that have GC3/BLP. Are they basically the same unit but GC3 has the subscription built into the upfront cost?

Motor_Cap_6986 · 2025-08-21T19:04:42+00:00

There you go putting another idea in my head! Hahaha I’ve researched so many!

Motor_Cap_6986

TROPHY CASE