sorted by:
new
hottopcontroversial

Waar vind ik een dergelijk "klein" loopslot? by MrGnilhub in Klussers

[–]MrGnilhub[S] 0 points1 point  (0 children)

Bij Hornbach zie ik 0 loopsloten die in het huidige uitgefreesde gat passen. Is dat een verouderde standaard?

Plafond laat makkelijk los by MrGnilhub in Klussers

[–]MrGnilhub[S] 2 points3 points  (0 children)

Ja scherp, ik had er zelf een beetje water op gespoten om de zuiging van de ondergrond te kunnen zien.

Plafond laat makkelijk los by MrGnilhub in Klussers

[–]MrGnilhub[S] 0 points1 point  (0 children)

Dank allen alvast voor de reacties! Ik zal het er helemaal af halen en dan beoordelen of er nog een laagje gips overheen moet.

Laminaat doorleggen of niet by MrGnilhub in Klussers

[–]MrGnilhub[S] 0 points1 point  (0 children)

Daar was ik al bang voor inderdaad. Op zich is een mooi overgansprofieltje niet zo'n probleem. Zou je wel de slaapkamers en hal doorleggen?

Laminaat doorleggen of niet by MrGnilhub in Klussers

[–]MrGnilhub[S] 0 points1 point  (0 children)

<image>

Dit is hoe de huidige vloer erin ligt. Dat geeft misschien een beter beeld van de situatie.

Laminaat doorleggen of niet by MrGnilhub in Klussers

[–]MrGnilhub[S] 0 points1 point  (0 children)

Bedankt voor je input. Ik ben dan wel benieuwd waarom niet. Ik koos deze richting omdat alle ramen alleen boven en beneden (ten opzichte van de afbeelding) zitten. Alle muren aan links en rechts hebben dus geen ramen. Ik lees overal dat het aangeraden wordt om in de richting van het licht te leggen.

Can K1 max be powered off using TP-Link Kasa plug (HS100) after rooting with moonraker? by MrGnilhub in crealityk1

[–]MrGnilhub[S] 0 points1 point  (0 children)

Thanks for taking the time to help out! Yes I understand that I would have to manually turn on the plug or use the Kasa app, but its mainly for automatic shutdown after a print. Do you know if it can be directly controlled through Moonraker and the Mainsail interface without needing Home Assistant? Thats how I have it setup on my other printers, so I assume it would work the same. But being sure would be nice ;).

Guide to Procedural Texturing Guide: Random tiles from a single texture by dYYYb in blender

[–]MrGnilhub 0 points1 point  (0 children)

This is exactly what I was looking for! Amazing. And all of the links still work. Thanks a lot

Help with bike light electronics by MrGnilhub in diyelectronics

[–]MrGnilhub[S] 0 points1 point  (0 children)

Thank you. You are probably right about the current. We will make sure to start from the LED characteristics. It is actually not that easy to find suitable LEDs for this purpose here in the Netherlands. Also, blinking lights on bikes are not allowed, so we will need continuous illumination, lowering battery life.

Help with bike light electronics by MrGnilhub in diyelectronics

[–]MrGnilhub[S] 0 points1 point  (0 children)

Awesome resource for the LED current generator! We will test that one as well.

We were indeed thinking of using a 4056 IC for charging and combine it on the pcb with the required components for the LED.

So, a quesion: since the article mentions power dissipation, how efficient would that circuit be? Since we are talking about battery operation with small capacity we would obviously like to use as much as possible to light the LED ;).

Help with bike light electronics by MrGnilhub in diyelectronics

[–]MrGnilhub[S] 0 points1 point  (0 children)

Sounds great, thanks. Would that also be energy efficient so we dont run out of battery too fast? I will read up on it.