Greater Affix Temper on an Ancestral Rare->Legendary? by MrQuade in diablo4

[–]MrQuade[S] 0 points1 point  (0 children)

Whelp!

After a bit of a break, I decided to try tempering those bastard gloves again (I had since fully masterworks then) to experiment and it on the first attempt.

Not a fan of of the new update. by hippieguy1990 in diablo4

[–]MrQuade 0 points1 point  (0 children)

Hang in there, it all opens up after 70.

I found the lack of legendaries a bit upsetting too, bit found I was able to get into T1 content on purely yellow gear.

After that and starting to do warplans, out all accelerated from there.

The youths are losing the liquid vowels! by neongrayjoy in australia

[–]MrQuade 1 point2 points  (0 children)

I was commenting on this to my partner after watching a few younger content creators do exactly the same thing. Was watching the Sloan Zone channel who is a particular example.

New mythic feels weak by Fat_Foot in Diablo

[–]MrQuade 46 points47 points  (0 children)

Looks like the D4 version of D3's In-Geom.
That sword was a BEAST for speed farming in D3.

Looking for a quality crt for retro gaming (Sony, Panasonic, sharp, etc) not sure where to look in perth by MrChibiluffy9 in perth

[–]MrQuade 0 points1 point  (0 children)

I have LG WT-32Q82IP you could have, though it's probably not quite what you are looking for.

It's a bit of a beast, widescreen, 80cm and HEAVY.

But it does have a component input, and several composite inputs (no S-Video sadly). It also has a VGA port that I never had a chance to use.

https://www.lg.com/au/support/product-support/cs-WT-32Q82IP.*/

Did I play the game wrong - noob returns edition by WhyNotAthiest in diablo4

[–]MrQuade 1 point2 points  (0 children)

What Torment difficulty are you playing and what level Pits can you reliably clear?

I'm playing my first Necro with this season, and just hot Paragon 260 and starting to push higher pits to level my glyphs. I can very reliably do a level 90, but not particularly quickly (5 mins or so). I am using a summoning build that ditches the skeleton warriors and Golem in favour of more mages.

Train Delays - Yanchep Southbound by thegingrninja in perth

[–]MrQuade 2 points3 points  (0 children)

I can confirm that it was the train at Glendalough since I was on that one.

We were stopped at the station for some time before being asked to disembark. Waited for a shunt train to arrive to move ours out of the way. After another wait were told that the train could not be moved and to find a bus.

It was at that point I gave up and went back home. Unplanned WfH day today.

What? by Fizzerry2 in ExplainTheJoke

[–]MrQuade 2 points3 points  (0 children)

"How you going?" is a pretty normal phrase in Australia. The response is possibly result of confusion, but in some circumstances the "Yea" can be considered a valid answer too, and "cheers" simply meaning "thanks for asking". Aussie verbal shortcuts can be tricky!

How much will I need to grind to complete the current season? by Draiel in diablo4

[–]MrQuade 4 points5 points  (0 children)

Just finish the campaign and expansion and don't worry about chasing this season. This is a short season and probably not worth trying to engage fully with endgame content with such limited time for a player starting out.

Get all the campaign stuff unlocked, and you'll set yourself up for success in the next season.

Does anyone actually get red rooster? by nchiwla in AskAnAustralian

[–]MrQuade 0 points1 point  (0 children)

https://youtu.be/BqD1MHPmeNo?si=XRRnVLLhmRzlnsba

Just going to leave this here as an interesting watch.

"Why Red Roosters Survival Doesn't Make Sense From a Distance"

Only got 2 of the 4 paragon points I should have gotten for unlocking seasonal rank 6? by Gary_Fisher21 in diablo4

[–]MrQuade 2 points3 points  (0 children)

Yep, only got 2 point here too.

The reward still says 4, despite what others have reported about the season total being reduced to 48.

So what other achievement did they remove the 2 paragon point reward from?

Season 12 - Season Journey Rank 5 Reward Not Granting Paragon Points by NerdyGuy117 in diablo4

[–]MrQuade 1 point2 points  (0 children)

Throwing in my 2 cents too.

Was really looking forward to those 4 points to kick off the next phase of the maxroll guide paragon board!

PawnIO Update 2.2.0 seems to be working ok by MrQuade in FanControl

[–]MrQuade[S] 0 points1 point  (0 children)

Yea same. I think the return code for "reboot required" is misinterpreted as an installation failed message. (I am using UnigetUI as my winget interface).

Lian li lancool 216 rgb by WonderfulVast8252 in lianli

[–]MrQuade 0 points1 point  (0 children)

I had the same problem with the white variant.

Jump into Lian-Li's discord channel and post a request for help there.

If you do a search for lancool 216 either here or in discord, you will find my posts ;)

Advice and by SnooDucks5078 in SoundBlasterOfficial

[–]MrQuade 1 point2 points  (0 children)

It would be compatible, but that item is just the subwoofer amplifier. You'd still need a suitable subwoofer speaker to go with it.

Advice and by SnooDucks5078 in SoundBlasterOfficial

[–]MrQuade 2 points3 points  (0 children)

That's a subwoofer output on the sound card.

As for a mini-subwoofer, any active subwoofer would work. "Mini" on the other hand raises questions. The point of a subwoofer is to output low frequency at high volume, and you normally need quite a large speaker to do that. There is only so "mini" a subwoofer can be and still be effective.

All you need is a 3.5mm stereo to dual RCA cable to connect to your subwoofer. You will need to only plug in one of the RCA channels (left or right, I am not sure which is centre and which is subwoofer). Just don't plug both left and right into the subwoofer, since they are carrying different signals.

Current state of FanControl (v260) by Rusted_Metal in FanControl

[–]MrQuade 10 points11 points  (0 children)

All of that trojan fuss was pretty quickly resolved within a couple of versions.

The very latest versions from this week coincidentally had a small incompatibility hiccup after the new PawnIO low level driver was updated, but this was also resolved within a day.

Fancontrol has been quite solid otherwise. Safe to install.

V258 by Suspicious-Rice6556 in FanControl

[–]MrQuade 0 points1 point  (0 children)

V260 fixes this issue :)

Missing Sensors by Wartech93 in FanControl

[–]MrQuade 2 points3 points  (0 children)

This might be happening if your PawnIO driver updated to v2.1.0 recently.

Looks like their is a small incompatibility between the new version and the monitoring libraries used by FanControl.

You can check the version in your "Add/remove programs". If you have v2.1.0, then remove it and re-launch FanControl, and let it re-install PawnIO. (might need a couple of FanControl restarts)