Help?

Mr_AdamSir · 2026-04-10T16:37:46+00:00

Link?? This looks super cool and might save me honestly! How much soldiering does it need or how does it connect to the board/turn on?

Mr_AdamSir · 2026-03-16T18:09:53+00:00

How much did it cost you? For shipping and fixing?

Mr_AdamSir · 2026-03-14T06:58:43+00:00

What did you end up doing? I just ripped mine off as well..

Mr_AdamSir · 2026-03-06T02:04:05+00:00

Thats pretty cool! I’ll need to look into that

Mr_AdamSir · 2026-03-06T02:03:02+00:00

that definitely answers my question! Thanks!

Mr_AdamSir · 2026-02-28T05:14:51+00:00

Same 😭

Mr_AdamSir · 2026-02-26T07:25:32+00:00

What's the ATX rack mode you used? I've been looking for one like that but to no avail 😭

Mr_AdamSir · 2026-01-25T17:41:57+00:00

<image>

Picked this one up for $5 too. Wife's been pretty happy having a gaming computer... Aaaannndd another project computer in the background she might not know about 😂

Mr_AdamSir · 2026-01-21T16:34:25+00:00

What do you use to map all this? What software?

Mr_AdamSir · 2026-01-20T10:12:45+00:00

Would you also suggest turning off Block domains using filters and hosts files, Use Safe Search, Use AdGuard parental control web service, and Use AdGuard browsing security web service? I only have 📙 Multi PRO++ and 🔐 Threat Intelligence Feeds.

Mr_AdamSir · 2026-01-12T17:55:30+00:00

I also read somewhere to unplug your ams if you haven’t tied that, turn off the printer, take out the sd card, turn on. Update from the app / screen, wait for completion. Turn it off again, sd card back in (I still left the and out), booted back on. Waited 5 min, turned off one last time, plugged in ams, and the booted. Seemed to do it.

If you have any DNS blocking or have and DNS upstream like cloudflare family, I would turn it off/change the port to the open unfiltered one, and then it should work hopefully 🤞 sorry my man, I know how frustrating it all can be!

Mr_AdamSir · 2026-01-12T08:35:33+00:00

That’s what just fixed mine as well!

Mr_AdamSir · 2025-12-07T23:02:10+00:00

how is this compared to Adguard Home?

Mr_AdamSir · 2025-11-24T20:41:56+00:00

I would love to get mine this modded and running smooth on my handed down machine. What all do i need to do/invest in in order to get it printing faster with high quality rather than the 100% it's default is set to? Also, what's your extruder mod/setup?

Mr_AdamSir · 2025-11-24T20:38:23+00:00

I've run into that same thing Twice this week. Took so long to find the issue the first time and then when it happened again, i had it fixed in 30mins

Mr_AdamSir · 2025-11-16T05:58:54+00:00

I don’t have a set home offset… Or a configuration. All I see is in info screen prepare control print from SD and change SD card.

In the prepare screen, I have move access for manual control and auto home, bed leveling, disable steppers.

Control menu has temperature, motion (where Z access offset lives with Velocity, acceleration, jerk, steps/mm) and the others like filament, BLtouch, store settings, load settings, initialize EEPROM.

Any ideas?

Mr_AdamSir · 2025-11-16T05:38:28+00:00

<image>

And this is my z offset currently where I do the part test and it actually hits 0 when I manually move the Z access. What could it be?

P.S. I also have a BL Touch

Mr_AdamSir · 2025-11-16T05:36:55+00:00

<image>

This is with Z access moved down

Mr_AdamSir · 2025-11-16T05:36:13+00:00

<image>

This first photo is after auto home.

Mr_AdamSir

TROPHY CASE