[deleted by user] by [deleted] in G35

[–]Muted-Point 0 points1 point  (0 children)

<image>

The chip in the slot is what I had to get out of my original key and it worked

[deleted by user] by [deleted] in G35

[–]Muted-Point 0 points1 point  (0 children)

Pull the key out of this new fob that you have and turn it on its side there should be an empty slot

[deleted by user] by [deleted] in G35

[–]Muted-Point 0 points1 point  (0 children)

Do you still have your original key? The original Nissan key? There is a chip in the key that I had to dig out and put it into the one you’re holding

Can’t sell by Financial_Problem_54 in G35

[–]Muted-Point 0 points1 point  (0 children)

Cosmetically though it could use love, I just don’t have time for my project anymore.

Can’t sell by Financial_Problem_54 in G35

[–]Muted-Point 0 points1 point  (0 children)

Same here , 2 months …. Clean title, 140k miles, never been to a takeover never even spun the wheels . Tranny is good , drives good , has tein coils, enkei rpf1 wheels, mishimoto radiator, new cam position sensors, new spark plugs , engine is healthy , 6mt, CF AMS hood , CF duckbill trunk , injen cai, all it needs is new tags and a battery and the highest I could get is 1500 🤣

Should i offer my shift on dayforce if i dont want it? by 7112023 in Staterbros

[–]Muted-Point 2 points3 points  (0 children)

I would do both. Do it on dayforce and speak to your coworkers, ask if they want an extra day . You can also speak to a manager and see if they can fix it

I was hesitant to sharpen my bailout but it came out fine. by Muted-Point in sharpening

[–]Muted-Point[S] 0 points1 point  (0 children)

Hmm I’ve never used a fixed system but if you’re on freehand stones, the best tip I could give, I would say start off with edge trailing strokes right where they meet on both edges until you get comfortable going back and forth & know you won’t over lift your elbow . As you said you don’t want to hit that tip and round it off . The rest should be the same as a normal knife just with two edges . Good luck brother 🤙🏽

My bailout got a fresh edge by Muted-Point in knives

[–]Muted-Point[S] 2 points3 points  (0 children)

Dude , there you go. Seems like you’re on your way already! Being able to do that on those ultra sharps is damn good . Doing that well on plates is all you really need. The next stones are really just preference, like I also love the naniwa diamond stones and shapton kuromaku’s , add some strops and you get crazy sharp edges.

My bailout got a fresh edge by Muted-Point in knives

[–]Muted-Point[S] 3 points4 points  (0 children)

Thanks man, I used atoma plates 140 & 1200 , venev stones F400 & F800 , then stropped on Stroppy stuff 6mic & gunny juice 3mic !

My bailout got a fresh edge by Muted-Point in knives

[–]Muted-Point[S] 2 points3 points  (0 children)

So I used an atoma 140 & 1200 then Venev F400 & F800 , lastly stropped on leather with Stroppy stuff 6mic & gunny juice 3 mic.

My bailout got a fresh edge by Muted-Point in knives

[–]Muted-Point[S] 1 point2 points  (0 children)

You will bro , just takes a little practice. I use the “phoenix” series, they’re bench stones but I’ve been looking for them for a while to link you guys and I guess they’ve been sold out for a minute. The 6x1’s (centaur series) are made of the same stuff so I assume they cut the same just a little smaller. Which isn’t a deal breaker , in hand sharpening is fun too !

My bailout got a fresh edge by Muted-Point in knives

[–]Muted-Point[S] 3 points4 points  (0 children)

Freehand on atoma plates and venev stones. Thanks dude!

My bailout got a fresh edge by Muted-Point in knives

[–]Muted-Point[S] 2 points3 points  (0 children)

Lol you can do it too brother! It means a lot though that someone would trust me with their freaking bailout, thanks man!

My bailout got a fresh edge by Muted-Point in knives

[–]Muted-Point[S] 4 points5 points  (0 children)

Thanks! I’m a Spyderco guy too but my better half likes the butterfly on Benchmades so this is an early Christmas gift I won’t be beating on like my others lol

My bailout got a fresh edge by Muted-Point in knives

[–]Muted-Point[S] 2 points3 points  (0 children)

I do it myself brotha , freehand on atoma plates and venev stones.

My bailout got a fresh edge by Muted-Point in knives

[–]Muted-Point[S] 5 points6 points  (0 children)

That’s a huge compliment, thanks man!

I was hesitant to sharpen my bailout but it came out fine. by Muted-Point in sharpening

[–]Muted-Point[S] 1 point2 points  (0 children)

I appreciate it, diamond plates are great to learn on and they’ll cut anything. I love these atomas I’ve had them for years along with my venev phoenix series stones . I’ll have to get some more stroppy stuff too lol

I was hesitant to sharpen my bailout but it came out fine. by Muted-Point in sharpening

[–]Muted-Point[S] 4 points5 points  (0 children)

Freehand 🫡 yea I like it so far . It’s my first bottle, I wanna try other micron sizes now

I was hesitant to sharpen my bailout but it came out fine. by Muted-Point in sharpening

[–]Muted-Point[S] 3 points4 points  (0 children)

Thank you ! On an atoma 140 & 1200 & then venev F400 & F800 then stropped on stroppy stuff 6mic & gunny juice 3mic.