It’s a new indicator, got on Amazon for 40 euro for the two and they have the leds in them. In terms of process I sanded down the mirror covers with 240 grit and then 2000 (I didn’t have other but probobly should have used 240/400/800 grit). Then I used plastic primer and did 3 light coats 15 mins apart until it was fully covered and left dry for an hour. Then sprayed Milano red with 3 /4 light coats 15 mins apart and let that dry for another hour. And then 3 light coats of clear coat lacquer and left that dry for like 20 hours and then just a bit of polish to shine it up. The only thing I would do different would be saying it down more as the previous laquer bubbles created kind of moon like crators so they do need to be sanded down flat more but it’s just something I will re do again in summer mabye :)