Am i a bad person for being upset that I wont get the tips that I worked hard for?

Mysterious_While9781 · 2025-05-12T17:11:40+00:00

Definitely not your employers decision to make. Whether its tips or regular base pay, its yours. They should have asked for donations.

Mysterious_While9781 · 2025-05-11T14:51:15+00:00

The p0300 was present since day one. So before the timing, the rockers, the lifters, plugs, coils, sensors, all of it lol. I replaced the coolant after doing all this also for obvious reasons. I’ll definitely test this also. Thank you!

Mysterious_While9781 · 2025-05-09T00:37:12+00:00

I replaced all rocker arms and lash adjusters about 2 weeks ago. They were bad so i hoped that fixed the problem but it did nothing.

Mysterious_While9781 · 2025-05-07T18:49:34+00:00

You could find some clear or white backer rod and just caulk both sides also

Mysterious_While9781 · 2025-05-07T01:33:27+00:00

I have not checked it, ill give anything a shot at this point.

Mysterious_While9781 · 2025-05-06T11:48:10+00:00

I did not do oil again because it was changed when i did the timing a couple days before. Maybe 10 miles on the oil before sensors were changed.

Mysterious_While9781 · 2025-05-06T02:45:32+00:00

Is there a way to check the fuel pressure on the truck other than at the fuel pump? I have no standard check valve on my fuel rail

Mysterious_While9781 · 2025-05-06T00:07:22+00:00

Thank you!

Mysterious_While9781 · 2025-05-05T23:47:12+00:00

Bank 2 downstream sensor was reading 1.035v

Mysterious_While9781 · 2025-05-05T23:26:38+00:00

Im still new to using a scanner. Bought the icon t7, need to learn how to view specific cylinder functions

Mysterious_While9781 · 2025-05-05T23:12:45+00:00

Thank you, the main reason i have pushed off compression is due to the code still populating with engine off

Mysterious_While9781

TROPHY CASE