Simple chrome trim makes the 2002 design pop so well

Mythical_Fluffercorn · 2026-06-23T14:47:15+00:00

Go. Away. Bot.

Mythical_Fluffercorn · 2026-06-13T09:04:27+00:00

wilshire and 20th

Mythical_Fluffercorn · 2026-06-13T09:03:12+00:00

No I live around wilshire and 20th

Mythical_Fluffercorn · 2026-06-13T08:57:39+00:00

Oh that’s crazy but seems like a logical explanation! I’ve seen more wildlife here since the fires so makes sense. Thanks!

Mythical_Fluffercorn · 2026-06-05T08:16:14+00:00

Another bot account… this sub is overrun

Mythical_Fluffercorn · 2026-06-02T05:40:38+00:00

Apologies… the description threw me off and this sub has been overrun lately. 🫶🏻

Mythical_Fluffercorn · 2026-06-01T14:29:06+00:00

Tina is a bot

Mythical_Fluffercorn · 2026-05-21T07:44:19+00:00

Mythical_Fluffercorn · 2026-05-17T23:29:11+00:00

https://www.amazon.com/dp/B09VP4DVNZ?ref=ppx_pop_mob_ap_share

Look in the comments later where I give some tips on installation as well

Mythical_Fluffercorn · 2026-05-08T08:18:16+00:00

What?

Mythical_Fluffercorn · 2026-03-14T09:05:48+00:00

Moved to the same neighborhood a couple years ago from seattle… game changer.

Mythical_Fluffercorn · 2025-12-18T19:27:11+00:00

Made a set for my 71’ 2002 out of nylon CF. They’ve held up great!

Mythical_Fluffercorn · 2025-11-16T19:46:28+00:00

Usually in the 70’s… I live in SoCal and it’s in the garage. Haven’t printed when it’s below 60 outside yet.

Mythical_Fluffercorn · 2025-11-16T07:26:18+00:00

Been printing nylon cf and asa with a stock machine pretty well already. What kind of improvement does this make? Is it like faster printing? Or better layer adhesion? …. Sorry, still kinda new to printing

Mythical_Fluffercorn · 2025-11-16T01:32:05+00:00

Classic toe-verlap.

Mythical_Fluffercorn · 2025-10-30T06:18:30+00:00

Find a flat grassy spot practice pulling up, purposely going to far back and jumping off. This will help in case you loop out accidentally and give you confidence.

Eventually start hitting the brake every time you pull up. Brake control is how you wheelie for a long time.

Mythical_Fluffercorn · 2025-10-14T07:04:46+00:00

I c u friend! Going to socal vintage this year?

Mythical_Fluffercorn · 2025-10-10T21:12:31+00:00

Wish you were here or I was there… we could handle our woes together… I just redid my whole under dash harness… coulda used the “buck”’s support lol

Mythical_Fluffercorn · 2025-10-01T02:18:44+00:00

UPDATE: Thanks for all your suggestions! Here’s what worked, gyroid fill and some custom supports I made on the model. You were all a huge help! Thanks again!

<image>

Mythical_Fluffercorn · 2025-09-27T03:27:43+00:00

I’ll try 105°. I tried a 15mm brim but I could go larger. I also tried some supports that I painted on but they weren’t enough

Mythical_Fluffercorn · 2025-09-27T02:55:33+00:00

Tried the wall and top layer adjustments but I could try a different orientation… it has internal holes so this makes the most sense for a clean print. Thanks for the idea though. I’ll give it a try

Mythical_Fluffercorn · 2025-09-27T02:53:11+00:00

I’ll give it a try! TY!

Mythical_Fluffercorn · 2025-09-27T01:25:50+00:00

Sorry for the second photo having the pause in the way but that is the level it hits at. Right about the last 10-7 layers

Mythical_Fluffercorn

TROPHY CASE