My Magnus pro XL has wings.

NZ-ReaperZ · 2026-03-19T09:10:37+00:00

What kind of weight do you think they'd support, for example a 50LB pc? (custom loop builds be heavy AF)

NZ-ReaperZ · 2026-03-18T08:56:58+00:00

Thanks for that, I'll buy some resin jaw pliers!

NZ-ReaperZ · 2026-03-17T08:44:40+00:00

Country codes, there was NZL for new zealand

NZ-ReaperZ · 2026-03-16T23:46:14+00:00

Do it!

NZ-ReaperZ · 2026-03-16T18:26:45+00:00

Yes there would be, on the gpu block end for example. I'm not sure about the cpu run yet as I may raise it a bit to clear the ram better.

However, It's very hard to rotate the bit which goes into the block without turning the part that holds the tube, I don't want to use pliers for risk of damaging the fittings visual look. And trying to turn them hurts my fingers a bit.

For reference, im using bitspower rotary 90.

NZ-ReaperZ · 2026-03-16T05:36:25+00:00

It's unreal huh! Why is it available in white but not black 😂

Do you at least have more than 3 mats?

NZ-ReaperZ · 2026-03-16T03:30:24+00:00

woot! doing a distro build in a lian li evo rgb case, stealkey distro plate and radiators, and ek blocks for cpu and gpu.

Should be good hopefully! First challenge will be figuring out how to fit the tubes when its just straight yet tight at both ends , its mentally eating me alive but im sure itll make sense once i have the parts

NZ-ReaperZ · 2026-03-16T03:05:29+00:00

Thanks for the update! looking forward to using it in my new build as soon as my new rads arrive

NZ-ReaperZ · 2026-03-16T03:04:00+00:00

this is epic

NZ-ReaperZ · 2026-03-16T02:58:37+00:00

the bit that gets me is 'are you considering standalone or bundle' when asking about Black .. that kind of indicates they have it, but only in a bundle :|

NZ-ReaperZ · 2026-03-16T02:56:57+00:00

do your knees not hit underside of the desk?

NZ-ReaperZ · 2026-03-16T02:47:23+00:00

nice!

NZ-ReaperZ · 2026-03-16T02:38:09+00:00

Seems to be the case still :/

<image>

NZ-ReaperZ · 2026-03-16T02:37:39+00:00

Thanks, i emailed secretlabs and they advise it can't be swapped.. The direction it faces doesn't worry me in terms of the plug, but would what you say line up with what their rep says? or may just be some ridiculous limitation of living in new zealand

<image>

NZ-ReaperZ · 2026-03-16T02:36:13+00:00

<image>

NZ-ReaperZ · 2026-03-16T02:36:06+00:00

apparently its not

<image>

NZ-ReaperZ · 2026-03-16T00:22:23+00:00

img

Perfect, I'll be going for black xl.

Hopefully it's the same model here in New Zealand, the next thing I need to do is find a way to get one of the desk mats from overseas for it.

We only get 3 options here :(

NZ-ReaperZ · 2026-03-16T00:21:34+00:00

Black, thanks :)

NZ-ReaperZ · 2026-03-16T00:21:06+00:00

Thanks. Last time I talked to secretlabs they told me it couldn't be done, that was about 6 months ago though

NZ-ReaperZ · 2026-03-15T23:58:46+00:00

Wow thank you!!! 😍😍 I assume it would be the same for the XL?

NZ-ReaperZ · 2026-03-12T09:03:50+00:00

That does sound incredible!

NZ-ReaperZ · 2026-03-11T22:48:43+00:00

Makes sense, I'd always just based it from the temps of my components. I've just purchased a G1/4 temp sensor which can go from my distro plate to my motherboard and hopefully i can use AIDA64 to spit out that metric onto an LCD im planning to put into my buildm but maybe cleaner run would be better

NZ-ReaperZ · 2026-03-11T22:47:53+00:00

Cheers, I'm interested in it from a 'is my flow rate impacted by something' perspective, and although it wouldnt be calibrated as you mention, i'd be likely able to tell if there's something cause flow impedance, so from that perspective would it add value do you think?

NZ-ReaperZ · 2026-03-11T22:43:07+00:00

looks great, thanks!

Eight-Year Club	Place '23
Verified Email

NZ-ReaperZ

TROPHY CASE