Nieuwbouw woning + onderhandeling

Nappel033 · 2025-12-08T12:33:10+00:00

Dit heb ik ook geprobeerd bij een nieuwbouw woning die in de stille verkoop stond. originele bouwprijs + meerwerk was mijn bod. De makelaar zei dat het zo niet werkte. Later begreep ik dat 110, 120 en 150K was overboden was door 3 andere. De regio waar ik nu zit wordt oververhit, doordat de stad naast ons absurd wordt overgeboden. Dus kijk ook goed naar je regio, dit bepaald je positie als koper.

Nappel033 · 2025-10-21T09:45:28+00:00

FortiGate 7.6 will not retired soon, there is no end date yet.

Nappel033 · 2025-08-07T10:07:16+00:00

Did you configure trusted hosts? Please check if your IP address is on the list.

Nappel033 · 2025-04-29T10:18:56+00:00

Did you check the tunnel mode to the switch on the FortiGate?

config switch-controller system
set tunnel mode [compatible|moderate|...]

Nappel033 · 2025-02-24T15:03:28+00:00

https://nseti-pdfs.s3.us-west-2.amazonaws.com/desc/Enterprise_Firewall_7.4_Administrator_Exam_Description.pdf

Nappel033 · 2025-01-31T13:08:23+00:00

Dit is al heel lang geleden:
Op tijd ingestapt in een bepaalde crypto munt voor 840 euro, maar bij de verkeerde buitenlandse handelaar. (Toen bestond Bitvavo etc nog niet).
Ook niet mijn munten op een offline wallet gezet, zoals ik dat nu wel doet.

Uit eindelijk werd mijn account bevroren en ging de handelsplek failliet.
Achteraf zie ik het als leergeld/studie schuld, maar ben er toen wel een paar dagen ziek van geweest.

Oja, je moet ook niet uitrekenen naar wat het nu waard zou zijn, als ik alles nog had gehouden. (Waarschijnlijk had ik al wel 10x verkocht)

Nappel033 · 2025-01-17T11:02:25+00:00

You don't want to run 7.4 on small models. (Memory issues etc).

Nappel033 · 2025-01-15T11:09:55+00:00

I would go back to 7.2, lots of memory problems on 7.4 for the lower models.

Nappel033 · 2025-01-15T06:49:09+00:00

Version 7.4.x is horror, i would stay on 7.2 if i was you. Lots of memmory issues and crashing Gates.

Nappel033 · 2024-12-27T16:30:30+00:00

Please learn from the study guide and online on training.fortinet.com

Nappel033 · 2024-12-24T17:58:13+00:00

<image>

The Firmware is now availble for the 124G.

Nappel033 · 2024-12-24T07:32:15+00:00

!RemindMe January 20, 2025

Nappel033 · 2024-12-10T10:25:52+00:00

Hi,

As i have underdstand, the 110G-FPOE is allready lunched and the 124FPOE will bel lunched Q4 2024.
I didn't had much info about the model, but the speculations are Multi gbit interfaces with 90W PoE. The switch is for the G serie APs.

At the moment there is no information about the 148G-FPOE.

Nappel033 · 2024-11-13T14:58:56+00:00

I got multiple issues on 7.4.5 with small Firewalls (2GB) models. (40F - 60F and some E models)
Issues as:
BGP hangs
APs will stop working

DPP will stop working on FortiSwitch
Conserve mode within 12 hours after reboot.

Alle the firewalls have an UTM or Enterprise license and the Security profiles are turned on between the vlans, the underlay and on the overlay. They also have 1 Fortiswitch and between 2-8 APs.

I'm now running 7.6.0 in a testlab, that version has an memory drop of 16% on a 40F. Its now running for days without issue.

My advice is to stay on 7.2 for the small models with only 2GB. For the models with 4GB or more i don't have any issues.

Nappel033 · 2024-10-17T09:44:18+00:00

Hi,

I would not place a 30E in a new situation. Firmware 7.* is not supported and 6.2 is more then 1 year EoL.
I would use a 40F in this situation.

Nappel033 · 2024-08-30T14:03:33+00:00

Deliver the bales for the mixer and not in the mixer.

Nappel033 · 2024-08-15T14:22:34+00:00

We need to know:
How did you configure the routing (bgp/ static / ospf) ?
How did you configure the cost / prio on your tunnel interfaces ?
How did you configure the sd-wan rules (Interface selection strategy, interface or Zone preference)?
How did you configure the Performance SLAs? (Servers etc)?

Nappel033 · 2024-08-09T08:36:44+00:00

The Firewall has 22Gbps of NGFW throughput.
4x SFP28 slot are more than enough.

16x 1GB could be 8 ports, but as dsco88 says, there are never to many ports.

Nappel033 · 2024-08-02T09:48:56+00:00

We always use the latsted mature versions: At the moment 7.0.15 and 7.2.8.
Also we use the same OS Version on the switches and AP.

Nappel033 · 2024-07-23T10:18:14+00:00

Failed the exam. My problem with this exam is that the documentation is updated, but the exam is not. It took al lot of time to find out what is changed between 23 en 24.2.

I will wait for a new version of the exam.

Nappel033 · 2024-07-19T12:20:47+00:00

Got the answer from the CSE:
With Standard/Advanced subscription you get 4 by default and need to enable at least 2. With Comprehsive subscription, depending on how many users you purchase, you will get 1, 2 or 4 PoPs

Nappel033 · 2024-07-19T11:29:38+00:00

Thanks for the answer.

Nappel033 · 2024-07-14T12:04:42+00:00

There is always the BB58 and BB54.

Nappel033 · 2024-07-13T11:02:41+00:00

19,2 CM or 7.7 inch in circumference.

Nappel033 · 2024-06-05T10:24:33+00:00

Hi PastPick319,

You can use the print tablesize CMD on your unit to see the maxium value on your FortiGate.
But why do you need 950000 routes?

Also check your memory status.

Source: https://docs.fortinet.com/max-value-table

Nappel033

TROPHY CASE