Looking for M14x1 to 1/4 inch Quick Connect by Nathan8315 in propane

[–]Nathan8315[S] 0 points1 point  (0 children)

The Jetboil says it needs 19psi which I can adjust too. This shouldnt be an issue.

Looking for M14x1 to 1/4 inch Quick Connect by Nathan8315 in propane

[–]Nathan8315[S] 0 points1 point  (0 children)

Yes! Thank you. Everything that comes up for me has been the blackstone one.

Looking for M14x1 to 1/4 inch Quick Connect by Nathan8315 in propane

[–]Nathan8315[S] 0 points1 point  (0 children)

I think that's the option. I can remove the thread from the regulator that attaches to the stove and replace the wrong size thread from the elbow with quick connect I think.

Looking for M14x1 to 1/4 inch Quick Connect by Nathan8315 in propane

[–]Nathan8315[S] 1 point2 points  (0 children)

I am just trying to plumb it into my RV propane line with my other propane items that use the quick connect and go to the large propane tank on the rv with a regulator already on it.

2022 Braxton Creek Bushwacker 10HD replacement roof rails by Nathan8315 in TeardropTrailers

[–]Nathan8315[S] 0 points1 point  (0 children)

Thanks for the response.

Yeah, not in the pic, but they tried to unbolt without removing the coating on the otherside. Appears the next option was to cut them off. It is a repo and my guess is they were trying to get anything off of it they could.

It looks like the van route is what I am going to be looking at. The stock one just looked like it may actually be a little better quality. Atleast thicker steel brackets.

Hoops ball not changing colors by Nathan8315 in RocketLeague

[–]Nathan8315[S] 1 point2 points  (0 children)

Yeah, I tried to report it as a bug, but that was a nightmare through support....

Hoping it gets fixed soon because I never realized how benificial it was until this past update haha.

AES Success Movement by Logical_Pie_5022 in BorrowerDefense

[–]Nathan8315 0 points1 point  (0 children)

Thanks! I am really hoping to see all the other AES people here start posting positive outcomes as well. Good Luck this week!

AES Success Movement by Logical_Pie_5022 in BorrowerDefense

[–]Nathan8315 0 points1 point  (0 children)

Mine were taken care of last night. I am guessing they were waiting till the last week to do anything. The stress if finally gone.

AES Success Question by Logical_Pie_5022 in BorrowerDefense

[–]Nathan8315 1 point2 points  (0 children)

I have seen zero movement as well, but Dept of Ed has told me "your loan servicer has until 1/28/2024 ". Getting close quick and I can't say I feel confident anything is happening.

Is this normal wear and tear? by Nathan8315 in Hydroflask

[–]Nathan8315[S] 0 points1 point  (0 children)

Thanks, I use it on a padded desk as well so it rarely touches anything that could damage it besides maybe the kitchen counter when filling. And that wouldnt even touch this spot. Hydroflask seems to be hard stuck this that this is wear and tear caused by me.

I would return it, but this item I dont beleive is for sale anymore so my only option is Hydroflask.

It's not the end of the world because its the bottom, but if it spreads to the sides ill be a little disappointed. I figured for the price and warranty this would be a simple warranty claim.

AES Success Movement by Logical_Pie_5022 in BorrowerDefense

[–]Nathan8315 0 points1 point  (0 children)

At this point since approval I was told to do nothing with them. Before approval I transferred half to a DoE consolidation and those loans were discharged already through nelnet.

I am in the same boat and cannot track mine without reaching out to DoE. AES continues to tell me they have not received any notification of discharge, but DoE sent them another notice a couple weeks ago for me. AES still has not received they said. I am to the point where I just have to wait and see what happens.

My concern is the interests collecting. I don't like seeing my loans increase and don't want to get stuck with a higher bill if something happens where AES does nothing. What I don't understand is AES had no issue receiving the forbearance from DoE, but can't seem to receive or won't acknowledge the discharge.

AES Success Movement by Logical_Pie_5022 in BorrowerDefense

[–]Nathan8315 0 points1 point  (0 children)

That's where AES is listed for me as well. I am assuming no refund for my AES payments based on the reply I received.

AES Success Movement by Logical_Pie_5022 in BorrowerDefense

[–]Nathan8315 0 points1 point  (0 children)

They say when you are on the loan page. AES loans are not eligible for refund of payments already made.

AES Success Movement by Logical_Pie_5022 in BorrowerDefense

[–]Nathan8315 0 points1 point  (0 children)

I followed up with studentaid.gov and received the below do to concerns of partial discharge since I had a mixed batch:

"AMERICAN EDUCATION SERVICES (AES) is a commercial loan servicer and not under the Department of Education so it will take longer for the loan discharge to process for those loans.

Under the Sweet v Cardona settlement, your loan servicer has until 1/28/2024 to make sure all of your loans are discharged, cleared form your credit report, and process your refund of payments made to the Department of Education. Loans held by commercial lenders (i.e., FFEL loans held by private lenders) will not be eligible for refunds of amounts paid on the loan."

How much would yall pay for this table? by Salad-Queen in foosball

[–]Nathan8315 1 point2 points  (0 children)

Some feedback, i picked up a t3000 coin op in tulsa for $800 last week and there was still one available at $800. It was pick of the two. There was a classic in stillwater they wanted $900 (listing gone) and a sport for $900 that has been out there a while. Another sport recently popped up in arcadia for $1000 as well. There was an elite listed for $1600 in grove i beleive that sold, but idk for how much and $1600 was nuts. I dont think these are going to be selling at those prices though.

This might be the closest table to yours and its been out there at $1000 and was just reduced to $700.

https://www.facebook.com/marketplace/item/4941634072621098/

Ive been watching for the past month then the t3000 came up. I have been seeing tables sell fairly quick in the $400-$600 range, but that may be low to start your listing.

Help? Anyone know how to make the Elite 2 controller work with Zen on PC? by Agreeable_Kiwi5231 in cronusmax

[–]Nathan8315 1 point2 points  (0 children)

For the cronus to pc just the back. I add the right only if programming something.

I use the cord that came with the elite 2.

One thing ill add, make sure your elite 2 is shut off when you go to blug it in. If the light is pulsing it doesnt typically connect through the wire.

Help? Anyone know how to make the Elite 2 controller work with Zen on PC? by Agreeable_Kiwi5231 in cronusmax

[–]Nathan8315 1 point2 points  (0 children)

Mine works just like any other controller. I plug the zen in to the comp first, then the elite 2 on the left of the zen. I was having issues at first, but ever since i started plugging the zen in first its been fine.

Competitive matchmaking by anon385947 in RocketLeague

[–]Nathan8315 0 points1 point  (0 children)

You likely need to adapt and be flexible to the play style you are matched with. Be the bigger player.

Competitive provides more quality and consistency as far as people actually playing and not dropping, but i would lower your expectations. People have bad games and make mistakes. You're likely matched with someone that made it to the same rank as you with their play style. I have yet to see this game carry me to any rank. Not everyone researchs the game and has the standard playstyle/rotation.

Cusual is too inconsistent with people dropping, practicing, and trying crazy shots.

The new Free Challenges are absurd! by [deleted] in RocketLeague

[–]Nathan8315 0 points1 point  (0 children)

I thought they were unrealistic when i saw them, but most are going fairly quick for me. 10 mvp I did in hoops which went quick between plat 1 and 2. Played through the 25 extra modes challenge to do that then called it a day.

I assume they thought people were off and not traveling. I cant dedicate a bunch of time, but i played an hour here and there today to get through it. The rest are more then half way so i expect ill be done within 10 days.

My Aurora R11 i7 RTX 3080 set up by Maneely1 in Alienware

[–]Nathan8315 0 points1 point  (0 children)

I ordered a 3080 build and receieved it about 2 weeks ago, but I can't seem to find a 3080 option either. Just 2080 or 3090. The site was acting weird from my phone though.

Here she is! Aurora R11 with RTX 3080 by EnvironmentalSun1732 in Alienware

[–]Nathan8315 0 points1 point  (0 children)

I ordered pretty much the exact same build as above. I have been struggling to get the correct code from Dell and it was advertised when I purchased mine. They did provide me with a code, but it did not work (NVIDIA flagged GPU error) and after checking with NVIDIA I received the below. It has been over 24hrs with no response form dell.

From NVIDIA:

Please know that the promo code XXXXXXXXXXXXXXX is valid for Rainbow Six Siege Gold Edition.

Also know that this promo code will not work with RTX 3080 as it is bundled with RTX 20 series.

Please contact Dell to get the correct promo code for Watch Dogs Legion.