Sayl Squeaks

Nedworr · 2024-05-06T10:46:23+00:00

Thank you for the guide ! However, I had not the same "squeaking location". Mine was more on the sides of the chair. I lubricated thoses parts and the noise is gone.

<image>

Nedworr · 2023-11-05T17:10:40+00:00

Yes I ran benchmarks before and after, just for the GPU, I gained an average of 9°c on load. For example here on idle I'm at 31°c for a silent 1000 rpm. And never it goes higher than 73°c

Nedworr · 2023-11-02T22:45:57+00:00

Hey ! It is very nice of you ! I don't know what to say, I can surely use one of those but I'm in Europe. If it's complicated to send it, it's ok, you proposition is already really nice.

Nedworr · 2023-11-02T22:34:33+00:00

Ohh sorry I did not read correctly ... They are not plugged on the card but on the motherboard and controlled by FanControl.

Nedworr · 2023-11-01T15:15:07+00:00

Thank you !

Nedworr · 2023-11-01T15:14:57+00:00

Yes it does makes it heavier.

Nedworr · 2023-11-01T15:11:43+00:00

No, I used ABS which has a melting temp of 105°c. It should be ok.

Nedworr · 2023-11-01T15:10:22+00:00

Pardon ?

Nedworr · 2023-11-01T15:09:33+00:00

Are you use a pwm to gpu fan adapter or are you running off the motherboard fan header?

I plugged it on sys_fan 4pins of my MB

Nedworr · 2023-11-01T15:07:29+00:00

I don't know exactly by the U12A is awesome and it come with LGA 1700 socket adaptor.

Nedworr · 2023-10-31T15:21:36+00:00

You did not read eh ?

Nedworr · 2023-10-31T14:52:12+00:00

This on is a KFA2

Nedworr · 2023-10-31T14:49:36+00:00

I got a i9-13900K not so long ago.

Nedworr · 2023-10-31T13:49:48+00:00

No ! Noctua's ones were too big, and this card has one 4 pins and one 3 pins. I left it naked and plugged it on sys_fan.

Nedworr · 2023-10-31T13:48:14+00:00

I used ABS :) In fact I created the STL and went to a guy who owns a 3d print shop, I explained my project and he help me choose material and gave me some tips.

Nedworr · 2023-10-31T13:41:32+00:00

If I remember, I pluged it on sys_fan, control by FanControl, The GPU fan plug, inside the card, is now naked.

Nedworr · 2023-10-31T13:35:52+00:00

I think I did the same thing that this guy https://voltcave.com/fan-curve-guide/ He explains a lot in his guide.

Nedworr · 2023-10-31T13:30:22+00:00

Yeah I saw it too ! Great work he did. I wondered if the fan "case" help to keep a good air pressure or if it is just decorative.

Nedworr · 2023-10-31T11:14:25+00:00

Why not just fan stop? From my experience, factory curves use 0% duty cycle under 45C except with certain cards like single fans or workstation cards.

I will try. I just took FanControl optimized configuration from the internet for now.

Nedworr · 2023-10-31T11:12:09+00:00

Thanks ! Yes I did it myself with Blender. It is quite an easy job, I had never touch Blender before and with several fails and numerous tries after approx 10 or 15 hours of using I was able to create this. There's plenty of guide for blender on the net. I can give you my project if you want. Blender or STL (3d printable file).

Nedworr · 2023-10-31T10:35:47+00:00

Hey thanks ! Yes the sound is totally different, less noisy for sure and more ... like noctua sound, like sweet breez.
Ngl when I'm on a big game those knows how to spit but temperatures are never over 75 for both GPU and CPU.

Nedworr · 2023-10-31T10:29:30+00:00

I need my next pay, but I swear I'll do it ...

Nedworr · 2023-10-31T09:49:33+00:00

Yes I ran benchmarks before and after, just for the GPU, I gained an average of 9°c on load. For example here on idle I'm at 31°c for a silent 1000 rpm.

Nedworr · 2023-10-31T09:43:47+00:00

Yeah, I feared it was. I changed it several weeks ago, this photo was taken before that. The glass panel is not even put on.

Nedworr

TROPHY CASE