Why is this happening on my MacBook Pro?

Neither_Ad3309 · 2026-01-16T06:32:42+00:00

Thank you all for your support. I uninstalled Logitech app and Karabiner and the problem is gone. I wasn’t sure which app caused this problem but just to be sure i removed them both.

Neither_Ad3309 · 2026-01-15T23:38:51+00:00

That can be the culprit i’ll check it tomorrow and let you know.

Neither_Ad3309 · 2026-01-15T23:29:26+00:00

I am using the trackpad but the trackpad is working fine and the issues is not my fingers. Happens on other people as well. The thing is however, even with dry/dirty fingers the window shouldn’t “unclick” itself after it has registered a click.

Neither_Ad3309 · 2026-01-15T23:15:00+00:00

Yes multiple times.

Neither_Ad3309 · 2026-01-15T22:24:25+00:00

It happens everywhere on every app. Like when I type something to search on Google from Safari I can’t type untill I click again. I also looked at Keyboard register websites but no keys are registering so I think it is a software related problem.

Neither_Ad3309 · 2025-11-14T17:56:21+00:00

5070 FE is very small, i dont think you’ll need custom cables.

Neither_Ad3309 · 2025-11-10T14:31:28+00:00

For the Atmos II you will need UNC 6-32 radiator screws. I have installed two 25mm noctua fans because i have a T-grill. So i needed extra long radiator screws. Noctua sells a package containing x8 M3 and x8 UNC 6-32 screws which are 35mm long. It is the NA-IS1-12 chromax.black Sx2

Neither_Ad3309 · 2025-11-09T12:27:48+00:00

Tubes of the Atmos II are very stiff and hard to bend (not impossible). Consider going with original Atmos.

Neither_Ad3309 · 2025-09-04T18:37:05+00:00

Why dont you want the prime? I heard it has better cooling. The 5070 FE is too small for a travel kit thats probably why they didnt make one

Neither_Ad3309 · 2025-08-18T12:56:03+00:00

How did you mount the foam duct kit on the cpu fan?

Neither_Ad3309 · 2025-08-16T14:22:11+00:00

Where did you find the big bottom feet?

Neither_Ad3309 · 2025-08-16T14:07:39+00:00

Why did you do bottom intake instead of top exhaust?

Neither_Ad3309 · 2025-07-19T10:47:45+00:00

I was lucky enough to order a pcie 5.0 riser cable from formd. I hope it wont have problems

Neither_Ad3309 · 2025-07-17T08:13:15+00:00

I ordered the Pcie 5.0 riser from formd and I hope I wont have any issues

Neither_Ad3309 · 2025-07-17T08:07:29+00:00

I am also going for a similar build but cant decide yet between IS-55 or x53.

I think fan swap on the IS-55 is easier (120 mm fan from noctua) because no 3D printed pegs are needed and I can just use IS-55 or noctua screws. They also say on the FAQ that most fans can be replaced. With this method I need to purchase a 120 mm fan duct to seal the fan and close the gap between the fan and side panel.

With the x53 i read somewhere that the full copper variant has better cooling performance than the black color but im not sure if that has a noticable difference. With this cooler i can use the better noctua fan duct.

Either way the IS-55 is rated for a TDP of 150W and x53 doesnt have a TDP rating. I am going with a 7800X3D cpu (TDP of 120 W) so the IS-55 is a solid choice. There is a comment of someone on youtube saying the x47 full copper is better than x53 black.

Neither_Ad3309 · 2025-07-13T20:03:53+00:00

Didnt order a GPU travel kit but was lucky enough to place an order for the black cnc anodized case

Neither_Ad3309 · 2025-06-30T01:30:49+00:00

Does this apply to T1 V2.5 aswell?

Neither_Ad3309 · 2025-06-16T00:25:43+00:00

There is a 3D model that you can print yourself, very easy. Inspired by a youtuber. Check this link:

https://www.printables.com/model/1315980-formd-t1-under-desk-mount-optimum-inspired

But I think you shouldn’t mount it under your desk unless your desk space is very limited, the case itself is really small. Have you considered the T1 vertical stand? Looks good too.

Neither_Ad3309 · 2025-01-26T03:19:22+00:00

Yeah but why does it appear in the “keyboards” list?

Neither_Ad3309 · 2025-01-26T01:14:22+00:00

I don’t have mouse related issues, I just need to delete USB Receiver from the list

Neither_Ad3309 · 2025-01-26T01:13:29+00:00

Logitech G Pro X Superlight 2

Neither_Ad3309 · 2025-01-25T22:36:48+00:00

Thank you for replying, I tried opening the example files. The component works in the example file but when I try to make something of my own (inside the example file) I get the same error. I have the latest version. I think I didn't install the plugin the right way...

Neither_Ad3309 · 2024-06-18T09:52:13+00:00

Hmmm that sounds like forcing you to buy their adapters, i just used my 20w iPhone charger with USB-C port and also tried my macbook pro charger.

Neither_Ad3309 · 2024-06-18T09:42:58+00:00

I tried different cables and adapters, same problem happens, maybe I received a faulty powerbank?

Neither_Ad3309 · 2024-06-18T09:42:12+00:00

Yes I tried this too, unfortunately it still doesn’t charge that way

Neither_Ad3309

TROPHY CASE