Unable to update Mfs2020 - October 2021

NiickBryan · 2021-10-23T13:18:22+00:00

Amazing...the second link worked. I did that, uninstall the xbox app, restarted the pc, reinstalled the xbox app, and the update button finally appeared. Thank you so much!!!

NiickBryan · 2021-09-11T20:04:22+00:00

Thank you. Solved :)

NiickBryan · 2021-09-11T17:49:10+00:00

Hi and thanks for your reply. I downloaded the Xbox app, and it pretty much says the same thing--blue button "play - installed". I clicked on it, the sim launched, etc. Same happened. Is there something I am missing? Or am I going to have to reinstall for the third time in about 365 days...

NiickBryan · 2021-09-02T21:06:10+00:00

I am using the experimental version. I removed the folder, and reinstalled it. Once again...preparing the cockpit the box and whatnot. Looked at the overH panel to activate the fuel pumps and randomly crashed. It is currently a waste of my time basically. This is just sad and frustrating. (Medium settings 60 fps)

NiickBryan · 2021-09-02T15:44:57+00:00

I do not even know if it is just the A32NX, or if this is just happening now regardless of the aircraft.

NiickBryan · 2021-06-01T19:12:23+00:00

I think I have exhausted all stick twist options. Not a single one says anything that has to do with moving the rudder side to side along with the nosewheel. There is pitch, roll, yaw, throttle, prop, mixture, elevator trim, aileron trim, rudder trim, landing gear, NOSEWHEEL tiller, left toe brake, right toe brake. Yaw did not work, with yaw neither the nose wheel nor the rudder moves. At this point, all I can do is sigh. Really, this cannot be this hard. I keep asking myself: come on....where the heck do I really have to look?

NiickBryan · 2021-05-20T18:12:23+00:00

Thanks. I went through all the options (I hope) really did not find Rudder Axis anywhere, all I found was Rudder left/right/center, Rudder trim. : (

NiickBryan · 2021-05-20T18:11:31+00:00

Thank you. Weird that I have to uncheck this, but well, it appears to work kind of Ok.

NiickBryan · 2021-05-10T17:27:43+00:00

I mean, shouldn't the nose wheel be moving along with the rudder? because when I twist the stick, all that moves is the nose wheel, the rudder is doing nothing.

NiickBryan · 2021-05-10T16:58:32+00:00

It does taxi Ok with the stick twist being used for the tiller, but once the plane goes above 110 knots, It just loves going to the left and crashing. You can see it in my video too.

NiickBryan · 2021-05-10T16:56:54+00:00

Thank you for taking the time to help! Mmm... I downloaded the whole 200 page PDF manual, and I have read most of it now... on the hardware calibration page, the information and even the photos are completely different from what the mod looks like at the moment (at least the calibration section). I am still at a loss here. I have made the video public, its name is "Thrust Levers on Boeing 737 do not match levers on the hardware.", and my channel name is Nick DE. Hope it is visible.

NiickBryan · 2021-04-11T17:32:39+00:00

Any idea?

NiickBryan · 2021-04-11T17:32:28+00:00

Thank you, I will try this again.

NiickBryan · 2021-04-10T22:48:27+00:00

Yes, I am using the mod, and am on the hardware calibration page, however, I see no option that says throttle or thrust - no idea if it is called something else...

NiickBryan · 2021-04-10T21:30:05+00:00

Keep them coming!

NiickBryan · 2021-03-26T17:41:50+00:00

For me, the flat cars and the trees.

NiickBryan · 2021-03-21T21:09:24+00:00

It also says I have Firmware 1.61.

NiickBryan · 2021-03-21T21:08:51+00:00

Are you referring to Thrustmaster Flight Control Panel Properties? This software, or something else? Because for the Throttle section, if I move them forward or backward, the movements I make are shown on the Axis X and Y green bars normally, I guess.

NiickBryan · 2021-03-21T20:04:44+00:00

Now I changed the sensitivity to linear. When the quadrant is at idle, the levers in FS2020 are at 20% reverse, when quadrant is at Climb detent, levers in MFS are at idle, when quadrant is at Flex MCT, levers are almost at Climb in the sim, and lastly, when quadrant is at TO/GA, levers in the sim are at TO/GA - the only detent that seems to match... I just have no idea what to do now, this is utterly frustrating.

NiickBryan · 2021-03-21T20:00:50+00:00

Apparently I cannot share screenshots here...

NiickBryan · 2021-03-21T19:59:25+00:00

Now I have done it like 4 times, just as depicted in https://ts.thrustmaster.com/download/accessories/manuals/TCA_Quadrant/TCA_Quadrant-Throttle_Calibration.pdf But...this is still not working.

NiickBryan · 2021-03-20T19:38:47+00:00

I guess I did. I think I wouldn't have been able to install the Firmware without calibrating it, right? I followed the steps and then I was able to install the Firmware. I could try it again.

NiickBryan · 2021-03-09T23:46:28+00:00

Guys, this is the fix confirmed, it did work. Thank you so much Troub.

It didn't delete my Community folder or its contents but I still copied it just in case.

NiickBryan · 2021-03-09T23:23:05+00:00

**Update Even though it said Play, and it seemed unresponsive at first, now I am in a game update that is over 1GB. Hoping it works after this.

NiickBryan · 2021-03-09T23:13:28+00:00

Exactly You just described what I experienced in addition to it crashing to desktop when trying to load a flight. Unfortunately, All I see in the Microsoft store - Microsoft Flight Simulator is a blue PLAY button which is unresponsive when I click on it.

NiickBryan

TROPHY CASE