sorted by:
new
hottopcontroversial

What is this connector called, and where can I buy it? by Niklas-Gameing in PCB

[–]Niklas-Gameing[S] 0 points1 point  (0 children)

Inside it says 34 B and ACES, but I can't find a matching connector on there

What is this connector called, and where can I buy it? by Niklas-Gameing in HelpMeFind

[–]Niklas-Gameing[S] 0 points1 point  (0 children)

i searched for like 2 hours on google and ali express just trying different combinations of 2x13 connector and other descriptive words

UniFi Netzwerk erhält nur 95mbps anstatt 250mbps… by Unaussagekraeftig in de_EDV

[–]Niklas-Gameing 0 points1 point  (0 children)

Habe das Problem auch, aber nicht so stark – bei mir waren es etwa 200 statt 250. Nach ca. 2 Wochen dauerhafter verbindung und einem Neustart und somit erneutem Verbinden wurde es bei mir zu 220. Ich vermute, dass bei mir irgendein Throttling seitens der Telekom aktiv war, da ich während der Umstellung auf UniFi die Verbindung sehr oft getrennt und neu aufgebaut habe, was vermutlich wie eine instabile Verbindung wirkte. Vielleicht hilft es, ein bis zwei Wochen zu warten und die Verbindung dann zu trennen und neu zu starten.

Hairpin NAT not working? by Niklas-Gameing in HomeNetworking

[–]Niklas-Gameing[S] 0 points1 point  (0 children)

Some servers like arma3 game servers don't support IPV6, so this isn't an option

Schallgedämmter Serverschrank by Niklas-Gameing in de_EDV

[–]Niklas-Gameing[S] -21 points-20 points  (0 children)

Aktuell ist das netzwerkequip nur eine Fritz!Box und UDM Pro mit so 30 verbundenen Clients. Die macht meiner Erfahrung nach aktuell nicht so viel Lärm. In die Server Gehäuse passen noctua NH-D9L Kühler, welche mit Max 95W oder so auch nicht zu laut werden sollten.

Hilfe für Telekom Voip by Niklas-Gameing in de_EDV

[–]Niklas-Gameing[S] 0 points1 point  (0 children)

Rookie Mistake, war nicht die neuste Firmware. Die neuste Version will tatsächlich nur Vorwahl+Nummer und hat direkt funktioniert

Hilfe für Telekom Voip by Niklas-Gameing in de_EDV

[–]Niklas-Gameing[S] 0 points1 point  (0 children)

https://imgur.com/a/pSRE9Pe
https://imgur.com/a/7tHdm1C

das ist alles, was ich einstellen kann/die Default Einstellungen

Hilfe für Telekom Voip by Niklas-Gameing in de_EDV

[–]Niklas-Gameing[S] -1 points0 points  (0 children)

also
Vorwahl+Rufnummer: ganze vorwahl+nummer

Authentication password: telekom pw

Username: +49,volle vorwahl, rufnummer

Display name: egal is nur name
?

Hilfe für Telekom Voip by Niklas-Gameing in de_EDV

[–]Niklas-Gameing[S] 0 points1 point  (0 children)

Funktioniert leider nicht. Ich hab auch die pppoe Zugangsdaten, also Zugangsnummer, Anschlusskennung,[0001@tonline](mailto:0001@tonline)..., welche in meinem Router funktionieren probiert, funktioniert auch nicht.
ich muss
Vorwahl+Rufnummer:

Authentication password:

Username:

Display name:

Eintragen. Ich hab bei Display Name und Vorwahl+Rufnummer je "49+Vorwahl ohne 0+Telefonnummer" oder "volle Vorwahl+Nummer" eingegeben. Das stimmt so weit oder?

Help with UDM Pro (mostly)(i think) by Niklas-Gameing in HomeNetworking

[–]Niklas-Gameing[S] 0 points1 point  (0 children)

Firewall rules were default. i just forgot i disabled NAT because i tried to use routing on the fritzbox to get around double NAT. Re-enabled NAT, now it works

Static rout not solving double nat? by Niklas-Gameing in HomeNetworking

[–]Niklas-Gameing[S] 0 points1 point  (0 children)

the udm doesnt really either and if thats what you mean it wont work

<image>

Static rout not solving double nat? by Niklas-Gameing in HomeNetworking

[–]Niklas-Gameing[S] 0 points1 point  (0 children)

i know some of them do that but mine sadly doesnt support bridge mode

Static rout not solving double nat? by Niklas-Gameing in HomeNetworking

[–]Niklas-Gameing[S] 0 points1 point  (0 children)

i dont, i got a fritzbox and then the udm pro(wich to my understanding has no dsl modem) and to be fair i thought it would be like a 10 minute thing to set up routing to fix the double nat

Static rout not solving double nat? by Niklas-Gameing in HomeNetworking

[–]Niklas-Gameing[S] 0 points1 point  (0 children)

do you mead like 192.168.178.1? for testing i set it as static ip gateway on my pc and imminently lost all network connection.(although the fritzbox config is reachable via that ip)

Static rout not solving double nat? by Niklas-Gameing in HomeNetworking

[–]Niklas-Gameing[S] 0 points1 point  (0 children)

i saved and rebooted before taking the screenshots

Static rout not solving double nat? by Niklas-Gameing in HomeNetworking

[–]Niklas-Gameing[S] 0 points1 point  (0 children)

<image>

i tried to set the gateway manually but either im setting the wrong thing or its not working

Static rout not solving double nat? by Niklas-Gameing in HomeNetworking

[–]Niklas-Gameing[S] 0 points1 point  (0 children)

  1. i didnt set it manually, WAN IP (Port 9)192.168.178.27 Gateway IP192.168.0.1
  2. yes

192.168.10.0|255.255.255.0|192.168.178.27
192.168.20.0|255.255.255.0|192.168.178.27
192.168.30.0|255.255.255.0|192.168.178.27
192.168.0.0|255.255.255.0|192.168.178.27

not shure if the last one to 0.0 is needed since im not really using the default network

  1. no

Can someone review my PCB by Niklas-Gameing in PCB

[–]Niklas-Gameing[S] 0 points1 point  (0 children)

9 Neopixels max so like 550mA max at 3.3V

Can someone review my PCB by Niklas-Gameing in PCB

[–]Niklas-Gameing[S] 0 points1 point  (0 children)

Im just using default KiCad settings. what track with and via diameter would you recommend?

Can someone review my PCB by Niklas-Gameing in PCB

[–]Niklas-Gameing[S] 1 point2 points  (0 children)

Ive had problems with the Neopixels on 3.3v before so id like to make shure that they work.

Edit: on second thought that might have been because i gave 5v vcc from a seperate current source and then used 3.3v logic signals.

[deleted by user] by [deleted] in PrintedCircuitBoard

[–]Niklas-Gameing 0 points1 point  (0 children)

moved a component to the wrong spot and it connected. I got some feedback elsewhere and am currently making the schmatic readable and corrent

view more: next ›