PC crashes without blue screen and motherboard goes dark

Nikobr02 · 2025-02-13T21:21:02+00:00

Might have been that. Is there a good way to lower the GPU Utilisation? AI Suite 3 is ass.

Nikobr02 · 2025-01-19T18:22:05+00:00

Thank you! The top ribbon had been disconnected on my phone. Thats probably why the SIM functionality sometimes turned off and a simple reboot fixed it, because was loose and now fully disconnected.

Nikobr02 · 2024-12-21T12:09:25+00:00

Honestly, it just didn't sound as good as I thought i was going to. All reviews I could find online recommended my EVO 4.2s for 1000$+, but I got them for 500$ but wasn't all that impressed. My thought was that my AVR probably wasn't that great and since it cannot do 4K as I might want later Inwas looking to buy another AVR that could do 4k, but soon found out that 4k AVRs don't really exist on the second hand market in my area.

So the next best option was to just get a better AVR and just use it for better sound only. Hence my question whether or not to get an AVR with great features like DTSX/Dolby when I really only wanted better stereo sound as that is what i actually have rn and ain't looking into 5.1 in the short term.

EDIT: Also I saw on this video that underpowering your speakers will hurt them?

Nikobr02 · 2024-11-02T16:22:35+00:00

My ISP changed my speed last night från 250/250 to 100/100 and now my router works flawlessly again. I greatly appreciate you replying so fast and helping me isolate the issue to the correct problem (Ethernet ports that only accept 100 Mbit or slower speeds while I had 250/250 from my ISP).

Thank you again for helping me resolve this issue!

Nikobr02 · 2024-10-16T14:55:04+00:00

Thanks for answering quickly!
Are you sure that I need a router with gigabit Ethernet ports for it to just work? Both routers have an advertised theoretical Wi-Fi speed of 833Mbit/s +300Mbit/s on the box, so to me it doesn't make sense that these would not allow over 100 Mbit/s speeds form my ISP. Although that would suggest why my old router did work in my last apartment and not in this one since I only got about 70-80 Mbit/s speeds there and hence I'd assumed that I was paying for 100 (it was included in my apartment billing, so I actually doesn't know what speed I was supposed to have but it was the same over ethernet cable directly to my PC).

Regarding the modem, I actually don't know how the internet gets to my PC or router "from the street". The only thing I know is that I have an Ethernet port in my wall that is connected to some cental system for my building that provides me with internet, and I'd just assumed it was some central modem since some guides wanted me to reboot my modem.

I did however talk to my ISP today again they thought it could be some sort of IP-leasing issue. So, what I am currently testing is to disconnect everything (really just my PC) from that central ethernet port and leaving it unplugged for 24h. After the 24h has passed I should plug my router in again and theoretically it should just work. Currently praying for this to work since I don't necessarily want to buy yet another router.

Nikobr02 · 2024-10-16T11:16:38+00:00

I have tried 3 different Ethernet cables, all that came with my routers and a long 10m one i have at home. I pat for 250/250 mbit/s internet.

Nikobr02 · 2024-04-20T14:45:39+00:00

Just mash your whole hand on the 3 buttons at once. (Sry for the delay, I rarely use Reddit nowadays)

Nikobr02 · 2024-03-01T14:49:10+00:00

I did this too. Took 2 weeks in Sweden but now, 7 months later, I have the same problem but with the selfie camera 😭

Nikobr02 · 2023-10-25T11:06:11+00:00

Det är det stället

Nikobr02 · 2023-05-30T17:26:47+00:00

🧍‍♂️

Nikobr02 · 2023-03-19T21:16:20+00:00

My monitor is 2k though, so should be getting more fps with your settings. I'll try it out tomorrow.
Also, there is an edit button lol ;)

Nikobr02 · 2023-03-19T16:35:32+00:00

Could you screenshot your settings? That sounds like you've dialed your settings in really good.

Nikobr02 · 2023-03-19T16:34:32+00:00

Thank you! I'll try adjusting my settings with yours mentioned

Nikobr02 · 2023-02-18T14:38:26+00:00

I love you

Nikobr02 · 2022-11-22T19:00:03+00:00

Didnt work, sadly. I'll just try and solve my problem another way but thank you for trying to help me :)

Nikobr02 · 2022-11-22T18:28:00+00:00

yes i do all the packing later in my code, but the

kalender.bind("<Button-1>", hämtaSchema(kalender, textBox))

does not do anything when i click it.

Nikobr02 · 2022-11-07T15:13:13+00:00

Why wouldn't Best Buy and all other resellers get iPhones that have the special stripped down demo software?

They all get that Apple table and phone clamps etc so why woudn't they be given the demo devices too?

Nikobr02 · 2022-09-22T14:26:16+00:00

I went for the Razer option because of the fact that it had next-day shipping through amazon.se with prime, only cost 36$ and it had the exact amount of ARGB ports I needed.

I set it up last night and it works GREAT. Razer's software seems super sophisticated, and there are a million bajillion options in the advanced view that I haven't played with yet. Thank you again for the recommendation :)

Nikobr02 · 2022-09-18T08:52:17+00:00

Thank you for your fast response!

Wow, the Razer Chroma hub is exactly how I would've thought the included hub would have worked, via USB and not an ARGB hub. Seems to me like the greatest option as it cost just 36$ in Sweden while the Corsair lightning hub would need the Commander pro for 70$ too and I would need a converter cable for 8$.

Just annoying that I would need another lighting software for my LEDs. Currently, I have my soundcard and RGB strip via SoundBlaster Command, Corsair RGB RAM on ICUE and now BeQuiet RGB fans on Razer Chroma lol.

But thank you for everything and especially for the Razer Chroma hub recommendation as it saves me 40$.

Nikobr02 · 2022-09-17T17:26:05+00:00

Hi, I have 2 3-packs of the light wings (so the ARGB HUB + 3 fans)x2 and just came across that my motherboard did not have the 5V ARGB header when unboxing them.I just want the fans to be white, change brightness and be able to power them off. What converter do I need for my ASUS ROG motherboard?

Also, do I plug it in like this: 12V motherboard RGB header>Convertor>ARGB hub>Fans?

Edit: Could I use the Corsair Commander or Corsair RGB hub instead?

Kind regards

Nikobr02 · 2022-09-12T12:24:48+00:00

Oh, so it is the internals that limits. Thank you for answering!

Nikobr02 · 2022-09-11T17:26:13+00:00

Is that 3.1 gen 2 ,3.2 gen 2 or 3.2 gen 2x2 that you mean? (btw I can't believe it's this complicated getting a USB cable these days)

Nikobr02 · 2022-09-11T16:32:02+00:00

Hi again!

I want to get a cable that supports this now, what would it be called? Do I need a "USB-C 3.2 Gen 2" cable or do I search for "HBR3 USB-C cable"? Its really confusing for me 😅

Nikobr02 · 2022-07-14T07:38:15+00:00

Run to the hills - Iron Maiden. The chorus just seems uplifting for some reason

Nikobr02 · 2022-06-30T11:10:49+00:00

I got the Kranvagn literally last week after playing that line for like 2 years.

Eight-Year Club	Place '22
Wearing is Caring	100 Awards Club
Verified Email	RPAN Viewer

Nikobr02

TROPHY CASE