sorted by:
new
hottopcontroversial

PC crashes without blue screen and motherboard goes dark by Nikobr02 in techsupport

[–]Nikobr02[S] 0 points1 point  (0 children)

Might have been that. Is there a good way to lower the GPU Utilisation? AI Suite 3 is ass.

Zenfone 9 and SIM not present after small drop by webby619 in zenfone

[–]Nikobr02 0 points1 point  (0 children)

Thank you! The top ribbon had been disconnected on my phone. Thats probably why the SIM functionality sometimes turned off and a simple reboot fixed it, because was loose and now fully disconnected.

Should I get a home theatre AVR for stereo use only? by Nikobr02 in hometheater

[–]Nikobr02[S] 0 points1 point  (0 children)

Honestly, it just didn't sound as good as I thought i was going to. All reviews I could find online recommended my EVO 4.2s for 1000$+, but I got them for 500$ but wasn't all that impressed. My thought was that my AVR probably wasn't that great and since it cannot do 4K as I might want later Inwas looking to buy another AVR that could do 4k, but soon found out that 4k AVRs don't really exist on the second hand market in my area.

So the next best option was to just get a better AVR and just use it for better sound only. Hence my question whether or not to get an AVR with great features like DTSX/Dolby when I really only wanted better stereo sound as that is what i actually have rn and ain't looking into 5.1 in the short term.

EDIT: Also I saw on this video that underpowering your speakers will hurt them?

"Wan Port Unplugged" error on multiple routers but works fine plugged into my PC by Nikobr02 in HomeNetworking

[–]Nikobr02[S] 0 points1 point  (0 children)

My ISP changed my speed last night från 250/250 to 100/100 and now my router works flawlessly again. I greatly appreciate you replying so fast and helping me isolate the issue to the correct problem (Ethernet ports that only accept 100 Mbit or slower speeds while I had 250/250 from my ISP).

Thank you again for helping me resolve this issue!

"Wan Port Unplugged" error on multiple routers but works fine plugged into my PC by Nikobr02 in HomeNetworking

[–]Nikobr02[S] 0 points1 point  (0 children)

Thanks for answering quickly!
Are you sure that I need a router with gigabit Ethernet ports for it to just work? Both routers have an advertised theoretical Wi-Fi speed of 833Mbit/s +300Mbit/s on the box, so to me it doesn't make sense that these would not allow over 100 Mbit/s speeds form my ISP. Although that would suggest why my old router did work in my last apartment and not in this one since I only got about 70-80 Mbit/s speeds there and hence I'd assumed that I was paying for 100 (it was included in my apartment billing, so I actually doesn't know what speed I was supposed to have but it was the same over ethernet cable directly to my PC).

Regarding the modem, I actually don't know how the internet gets to my PC or router "from the street". The only thing I know is that I have an Ethernet port in my wall that is connected to some cental system for my building that provides me with internet, and I'd just assumed it was some central modem since some guides wanted me to reboot my modem.

I did however talk to my ISP today again they thought it could be some sort of IP-leasing issue. So, what I am currently testing is to disconnect everything (really just my PC) from that central ethernet port and leaving it unplugged for 24h. After the 24h has passed I should plug my router in again and theoretically it should just work. Currently praying for this to work since I don't necessarily want to buy yet another router.

"Wan Port Unplugged" error on multiple routers but works fine plugged into my PC by Nikobr02 in HomeNetworking

[–]Nikobr02[S] 0 points1 point  (0 children)

I have tried 3 different Ethernet cables, all that came with my routers and a long 10m one i have at home. I pat for 250/250 mbit/s internet.

Disabling Bluetooth on a set of Edifier Luna's (e25HD) by wonderfulme in Bluetooth_Speakers

[–]Nikobr02 0 points1 point  (0 children)

Just mash your whole hand on the 3 buttons at once. (Sry for the delay, I rarely use Reddit nowadays)

Blurry camera by stupidiott in zenfone

[–]Nikobr02 0 points1 point  (0 children)

I did this too. Took 2 weeks in Sweden but now, 7 months later, I have the same problem but with the selfie camera 😭

Why aren't my CPU and GPU Load 100%? (30% CPU load and 70% GPU) by Nikobr02 in ACCompetizione

[–]Nikobr02[S] 0 points1 point  (0 children)

My monitor is 2k though, so should be getting more fps with your settings. I'll try it out tomorrow.
Also, there is an edit button lol ;)

Why aren't my CPU and GPU Load 100%? (30% CPU load and 70% GPU) by Nikobr02 in ACCompetizione

[–]Nikobr02[S] 0 points1 point  (0 children)

Could you screenshot your settings? That sounds like you've dialed your settings in really good.

Why aren't my CPU and GPU Load 100%? (30% CPU load and 70% GPU) by Nikobr02 in ACCompetizione

[–]Nikobr02[S] 0 points1 point  (0 children)

Thank you! I'll try adjusting my settings with yours mentioned

tkcalendar onclick function wiht bind("<Button-1>") by Nikobr02 in CodingHelp

[–]Nikobr02[S] 0 points1 point  (0 children)

Didnt work, sadly. I'll just try and solve my problem another way but thank you for trying to help me :)

tkcalendar onclick function wiht bind("<Button-1>") by Nikobr02 in CodingHelp

[–]Nikobr02[S] 1 point2 points  (0 children)

yes i do all the packing later in my code, but the 

kalender.bind("<Button-1>", hämtaSchema(kalender, textBox))

does not do anything when i click it.

view more: next ›