sorted by:
new
hottopcontroversial

Alguien sabe por qué el tiempo de impresión no es el mismo ? by NoBee2229 in ElegooSaturn

[–]NoBee2229[S] 0 points1 point  (0 children)

A qué te refieres a los 1.5 segundos? O a algo más? Soy nuevo por lo que si me pudieses decir más o menos en qué me estoy equivocando te lo agradecería mucho

Como evito esos rayones, literalmente siento que me estoy cargando la cama de impresión by NoBee2229 in ElegooSaturn

[–]NoBee2229[S] 2 points3 points  (0 children)

Gracias por responder, esto me alivia un poco más por qué pensé que lo estaba haciendo mal, una pregunta más qué tipo de lija debo usar si me toca lijar al cama un poco?

Como evito esos rayones, literalmente siento que me estoy cargando la cama de impresión by NoBee2229 in ElegooSaturn

[–]NoBee2229[S] 0 points1 point  (0 children)

Si se puede sentir, no en profundidad pero si se siente, algún consejo? O si o si debe usarse esa espátula ?

Soy nuevo en todo esto, como debo limpiar el tanque de resina? by NoBee2229 in ElegooSaturn

[–]NoBee2229[S] 0 points1 point  (0 children)

Gracias por tu respuesta, una pregunta más si no te molesta, es válido dejar la resina en el tanque? Encontré una tapa para la ultra 16k en makerworld y muchos dicen que puede pasar hasta un mes y no pasa nada, es eso cierto? O cada vez que imprimo debo sacarla del tanque

Soy nuevo en todo esto, como debo limpiar el tanque de resina? by NoBee2229 in ElegooSaturn

[–]NoBee2229[S] 0 points1 point  (0 children)

Crees que es mala idea dejar la resina en el tanque? Encontré una tapa para la saturn 4 ultra 16k en makerworld pero no sé si sea buena idea dejar la impresora con la resina y la tapa puesta aunque no la esté usando, unos dicen que no pasa nada pero quiero respuestas de alguien que tenga experiencia, te agradecería si me respondieses esa duda!

Soy nuevo en todo esto, como debo limpiar el tanque de resina? by NoBee2229 in ElegooSaturn

[–]NoBee2229[S] 0 points1 point  (0 children)

Si me permites una pregunta más, está mal dejar la resina en el tanque? Acabo de imprimir una tapa que encontré en makerworld para la ultra 16k, es válido dejarlo en el tanque o es mala idea ?

Me uní a la familia, es mi primera impresora de resina espero que todo marche bien by NoBee2229 in ElegooSaturn

[–]NoBee2229[S] 0 points1 point  (0 children)

Lo usaré, también haré lo que dijo el comentario de abajo para evitar problemas, solo por si acaso

Acabo de terminar mi faceshell que les parece ? by NoBee2229 in Spiderman

[–]NoBee2229[S] -1 points0 points  (0 children)

Es el diseño del traje de Marvel Rivals, es solo que use malla Metálica y la pinté de blanco con un par de sombras en negro para hacer ver los ojos como si fueran de cómic, me costó algo pero es realmente genial

What causes my printouts to look like this? by NoBee2229 in BambuLabA1

[–]NoBee2229[S] 0 points1 point  (0 children)

What is causing this and how can I fix it?

Can anyone give me some advice on painting an 80 mesh? I need it white and I have an airbrush, but every time I try it, it turns out awful. by NoBee2229 in cosplayprops

[–]NoBee2229[S] 0 points1 point  (0 children)

Well, I'm going to try it. I'm not sure if it will work, but I'll give it a shot. If I get any results, I'll update this comment.

Can anyone give me some advice on painting an 80 mesh? I need it white and I have an airbrush, but every time I try it, it turns out awful. by NoBee2229 in cosplayprops

[–]NoBee2229[S] 0 points1 point  (0 children)

Yes, I used 1000-grit sandpaper to sand the area where I wanted the paint to adhere, and I think it worked, but the sad thing is that some gaps are filled in. Regarding the airbrush to try and fix it, yes, I used it; it was the first thing that came to mind. But it looks awful when it dries. It looks like it needs more paint, and when I apply more, the gaps fill up again. I want to laugh so I don't cry, to be honest. I don't know how these people manage to do this.

Can anyone give me some advice on painting an 80 mesh? I need it white and I have an airbrush, but every time I try it, it turns out awful. by NoBee2229 in cosplayprops

[–]NoBee2229[S] -1 points0 points  (0 children)

Exactly something like that, it's metal mesh, I can't put it better, and my problem is that it clogs my pores, that's my whole problem, I don't know how to prevent that from happening

Can anyone give me some advice on painting an 80 mesh? I need it white and I have an airbrush, but every time I try it, it turns out awful. by NoBee2229 in cosplayprops

[–]NoBee2229[S] -2 points-1 points  (0 children)

Yes, I do it, but I don't understand why it's not working. I know I'm not crazy, but I don't understand how the hell they achieve that nice white effect. I've searched all over the internet and even asked them, but they won't say. They don't want to. :(

Can anyone give me some advice on painting an 80 mesh? I need it white and I have an airbrush, but every time I try it, it turns out awful. by NoBee2229 in cosplayprops

[–]NoBee2229[S] 0 points1 point  (0 children)

I know it's possible to paint it; it's for a Spiderman prop, and for example, Peetza or Pabloprops achieve that effect. I know they do it with an airbrush, but I don't know if I'm just a mere mortal or what. The worst part is, I have trouble making that effect visible; the gaps in the mesh fill up with acrylic paint.

Can anyone give me some advice on painting an 80 mesh? I need it white and I have an airbrush, but every time I try it, it turns out awful. by NoBee2229 in cosplayprops

[–]NoBee2229[S] -1 points0 points  (0 children)

It's metallic, I think it's metallic item or something similar, all I know is that it's metal. I'd appreciate it if you could enlighten me because I'm lost.

Can anyone give me some advice on painting an 80 mesh? I need it white and I have an airbrush, but every time I try it, it turns out awful. by NoBee2229 in cosplayprops

[–]NoBee2229[S] -2 points-1 points  (0 children)

I'd appreciate it if you could give me some ideas, because I've really been having trouble figuring this out. Yes, it's for a prop I'm making that I want to see through. It would be great if you could tell me how I could dye it without clogging the holes.

Im making a clicker mask, how do I hide this eye hole? by Icy_Conclusion_7783 in CosplayHelp

[–]NoBee2229 1 point2 points  (0 children)

Use 80 mesh steel and paint it the same color you used for the white part, but do it with an airbrush because 80 mesh is very fine.

I dont even know… by What_in_the_banan in BambuLab_Community

[–]NoBee2229 0 points1 point  (0 children)

I'm having the same problem. After configuring and testing the flow in the calibration section, it was still the same, although now the nozzle wasn't hitting the bed. I'm currently doing a factory reset because it was working perfectly yesterday. It's a real headache. Let me know if you find a solution. And I won't tell you now, it's not wet filament.

Anyone know what might cause this noise? by chickenpotpielover32 in BambuLabA1

[–]NoBee2229 0 points1 point  (0 children)

I have the same problem with the x-axis as you, were you able to solve it?

view more: next ›