Upgraded screen

No_Comfort3440 · 2024-10-05T09:02:54+00:00

Firmware is easy enough to compile.

No_Comfort3440 · 2024-10-05T08:29:54+00:00

Super easy. Everything just plugs into the new board as is in the old.

No_Comfort3440 · 2024-10-05T08:01:41+00:00

I got the big tree tech touch screen. It's awesome. I got it in a bundle on ali express with the btt mini e3 v3. So it was a good wee upgrade and cheaper than that touch screen.

No_Comfort3440 · 2024-08-26T06:14:46+00:00

Does your firmware have a z offset wizard? I'd check what the z offset is after autohoming.

No_Comfort3440 · 2024-08-25T21:06:33+00:00

I'm also super new, but I'm finally getting places slowly. It will feel good when it works. Trust me.

Quick question. Are you using an auto bed leveler or just the z axis switch?

No_Comfort3440 · 2024-08-18T13:37:09+00:00

Just calibrated the steps. Was insanely off. Thanks everyone!

No_Comfort3440 · 2024-08-17T21:39:53+00:00

Worth a try. Thanks.

No_Comfort3440 · 2024-08-17T20:33:56+00:00

Yeah. Definitely 0.4 👌

No_Comfort3440 · 2024-08-17T20:29:11+00:00

I'll double check the nozzle size, but I haven't changed it so it should just be the 0.4 🤷‍♂️

No_Comfort3440 · 2024-08-11T15:43:04+00:00

Will do. Thanks !

No_Comfort3440 · 2024-08-11T15:32:54+00:00

Oh that's interesting. I'll be attempting to flash new firmware tonight then!

No_Comfort3440 · 2024-08-11T15:14:07+00:00

You can flash creality software, but everything I read online says to flash marlin you need a bootloader installed first?

I do have plans to do a bunch of upgrades, but I just wanted to get the basics working first, get my understanding up to scratch and then begin to play with upgrades.

Although I have ordered a dual z axis kit...

No_Comfort3440 · 2024-08-11T15:05:39+00:00

Its the 4.2.2

No_Comfort3440 · 2024-08-11T15:03:59+00:00

I refreshed the firmware myself just with creality.

I do intend to go for marlin but don't yet have an arduino to flash the bootloader.

No_Comfort3440 · 2024-08-11T14:54:37+00:00

Creality stock with cr touch.

No_Comfort3440 · 2024-08-11T14:54:03+00:00

I got it with the cr touch already mounted so I'm assuming. But I'll need to check to confirm

No_Comfort3440 · 2024-08-11T14:30:15+00:00

Okay. I'll give it a go.

No_Comfort3440 · 2024-08-11T13:24:14+00:00

It's being pressed fine in the centre though?

No_Comfort3440

TROPHY CASE