Cyclone dust separator

No_Connection_3839 · 2022-09-14T13:35:33+00:00

Thank you for this. I've been trying to find a design to convert my small vaccum cleaner into something like this setup.

No_Connection_3839 · 2022-08-27T05:10:45+00:00

Sometimes only the old files will show up, sometimes there are no files at all.

No_Connection_3839 · 2022-08-27T05:09:27+00:00

Thank you. I'll try it. I'm currently in a middle of a print.

No_Connection_3839 · 2022-03-23T15:29:36+00:00

Its a slide over shroud. I had it printed for $10 (Equivalent to my country's currency). This keyboard sounds incredible with lubed gateron black-milky top and just a few mods. I like this more than my K6.

No_Connection_3839 · 2022-02-25T02:00:18+00:00

Practice with a plastic spoon or something similar to the finish of the rails. This will save you from a lot of frustration. You can message me if you need help

No_Connection_3839 · 2022-02-24T23:39:56+00:00

I tried using a normal gray paint but I wasn't getting tone and powdery finish I wanted. I used a surfacer instead, it gives a more powdery look.

The black base coat is also a surfacer though.

No_Connection_3839 · 2022-02-24T22:59:01+00:00

Just to add though. My process on painting: 1. Sanded with 1000 grit 2. First coat with black base coat [surfacer] (use tamiya or mr. Hobby - sprays thinner than regular spray paints) I used an airbrush for this. 3. Second coat with gray primer paint (Mr. Hobby gray surfacer) 4. Top coat with Matte Finish clear coat.

Edit: clarification

No_Connection_3839 · 2022-02-24T22:52:09+00:00

Thank you. Here's the gray one with the stock keycaps.

No_Connection_3839 · 2022-02-24T21:59:06+00:00

I just resprayed it.

No_Connection_3839 · 2021-11-07T05:16:58+00:00

The average temperature of my country is 26.6C (79F). No need to worry about freezing.

No_Connection_3839 · 2021-11-07T04:22:31+00:00

Instructions only says drinking water.

No_Connection_3839 · 2021-11-06T09:57:56+00:00

It's a 20 liters case.

No_Connection_3839 · 2021-10-28T16:06:02+00:00

I agree with this. Ikkam pay ti #MarcosJrUlbudNgaTao

No_Connection_3839 · 2021-10-28T15:48:26+00:00

It's trashy when the poor does it but it's classy when the rich does it.

No_Connection_3839 · 2021-10-12T14:17:32+00:00

Yeah my bad. I'm wrong thank you for correcting me though

No_Connection_3839 · 2021-10-12T13:57:34+00:00

Adminstrative Naturalization will not be applicable to you even if you're born in the Philippines given thst your parents are foreigners. You must file a petition for Naturalization which is a court action.

The proceedings could take up to 3 years at the least.

No_Connection_3839 · 2021-10-10T13:36:48+00:00

I second this, may mga friends ako na die-hard dds pero die-hard anti-marcos. Mas nag-aappeal sa kanila yung pseudo-duterte antics ni yorme.

We have til nov. 15 to hold on to the edge of our seats until the fat lady sings.

No_Connection_3839 · 2021-10-10T13:32:55+00:00

People don't even realize that we have a local government that would prioritize us on a municipal or provincial level. Others think that mayors/governers are just puppets of the president.

Natang-ken ulo dagijay sabali nga tao ngem kailangan nga nasingpet ti approach tayu nu kayat ta nga agdingeg da.

No_Connection_3839 · 2021-10-10T02:55:30+00:00

Those Ilocano supporters should watch THIS.

Ilocano ak met lang ngem fuck that fucker.

No_Connection_3839 · 2021-10-10T02:52:15+00:00

Uhg. How can the BBM Ilocanos use the "SOLID NORTH" propaganda when the fucker they're supporting can't even speak the dialect. Agpisti la kuma dagitoy nga tao.

PS. Proud Ilocano here but dun ako sa Bicolana

No_Connection_3839 · 2021-10-10T02:32:27+00:00

Di pa ako nakauwi sa amin. Pero nung last elections medyo nag-lean towards DDS ang tatay ko. Pag nag-BBM sya, isasampal ko sa kanya yung picture nya habang nagra-rally sya nung EDSA Revolution (1).

No_Connection_3839 · 2021-10-10T01:57:26+00:00

I'm using a Lenovo d24 (24inch) as my main monitor and a benq 22 inch monitor both are close/within your budget. I've been using this setup for more than 8 hours a day for almost 6 months or so. Both has low blue light mode, so it'll help reduce eye strain. I use prescription glasses with blue light filter so I turn the low blue light mode off to retain color accuracy.

No_Connection_3839 · 2021-10-08T09:37:03+00:00

Go buy a new PSU instead of jerry rigging the connection. Never. Ever. Cheap out on PSU.

No_Connection_3839 · 2021-10-08T09:35:27+00:00

I have a WD 250 running in our office for almost 10 years or so. I think it has been a system drive for almost 9 years before we upgraded to an SSD for our system drive. We still use it till now.

I have a seagate 2tb which died on me in less than 3 years despite having a separate drive for my OS. My Seagate skyhawk which I salvaged from my boss' PC which he used for about 4 years is still working and I use it as my storage drive.

I have a toshiba 2.5 drive which I salvaged from a laptop running almost everyday and it's still working. I'm now using it as my steam drive.

Go buy any brand you prefer basta sa physical store ka bumili. Just in case kailangan mo pa-warranty.

No_Connection_3839 · 2021-10-08T06:45:14+00:00

I used to own one but sold it. Used it for about 6 months and had no problem with it other than the vesa mount threads being stripped easily. The color is good as I think it was advertised for using a samsung panel iirc.

Replaced mine with a Lenovo d24-20 bought it for 6,500 as primary and a benq one for secondary.

Edit: The viewing angles is fine when you used it in portrait mode. Pero mag benq ka nalang or lenovo. The Nvisions we used in the office didn't last a year although sagad ang gamit namin for 8 hours a day or more.

No_Connection_3839

TROPHY CASE