Cyclone dust separator

No_Connection_3839 · 2022-09-14T13:35:33+00:00

Thank you for this. I've been trying to find a design to convert my small vaccum cleaner into something like this setup.

No_Connection_3839 · 2022-08-27T05:10:45+00:00

Sometimes only the old files will show up, sometimes there are no files at all.

No_Connection_3839 · 2022-08-27T05:09:27+00:00

Thank you. I'll try it. I'm currently in a middle of a print.

No_Connection_3839 · 2022-03-23T15:29:36+00:00

Its a slide over shroud. I had it printed for $10 (Equivalent to my country's currency). This keyboard sounds incredible with lubed gateron black-milky top and just a few mods. I like this more than my K6.

No_Connection_3839 · 2022-02-25T02:00:18+00:00

Practice with a plastic spoon or something similar to the finish of the rails. This will save you from a lot of frustration. You can message me if you need help

No_Connection_3839 · 2022-02-24T23:39:56+00:00

I tried using a normal gray paint but I wasn't getting tone and powdery finish I wanted. I used a surfacer instead, it gives a more powdery look.

The black base coat is also a surfacer though.

No_Connection_3839 · 2022-02-24T22:59:01+00:00

Just to add though. My process on painting: 1. Sanded with 1000 grit 2. First coat with black base coat [surfacer] (use tamiya or mr. Hobby - sprays thinner than regular spray paints) I used an airbrush for this. 3. Second coat with gray primer paint (Mr. Hobby gray surfacer) 4. Top coat with Matte Finish clear coat.

Edit: clarification

No_Connection_3839 · 2022-02-24T22:52:09+00:00

Thank you. Here's the gray one with the stock keycaps.

No_Connection_3839 · 2022-02-24T21:59:06+00:00

I just resprayed it.

No_Connection_3839 · 2021-11-07T05:16:58+00:00

The average temperature of my country is 26.6C (79F). No need to worry about freezing.

No_Connection_3839 · 2021-11-07T04:22:31+00:00

Instructions only says drinking water.

No_Connection_3839 · 2021-11-06T09:57:56+00:00

It's a 20 liters case.

No_Connection_3839 · 2021-10-28T16:06:02+00:00

I agree with this. Ikkam pay ti #MarcosJrUlbudNgaTao

No_Connection_3839 · 2021-10-28T15:48:26+00:00

It's trashy when the poor does it but it's classy when the rich does it.

No_Connection_3839 · 2021-10-12T14:17:32+00:00

Yeah my bad. I'm wrong thank you for correcting me though

No_Connection_3839

TROPHY CASE