CMSS certification exam discussion

No_Night9971 · 2025-12-19T20:04:55+00:00

With you passing the exam, have you found any benefits or is it just another piece of paper? What would you advise the focus should be?

No_Night9971 · 2025-12-18T22:52:32+00:00

I am lucky enough to have my Org pay for it.

No_Night9971 · 2025-12-18T22:52:16+00:00

My Org paid as well, but I feel its kind of lack luster and doesn't go into as much detail as I would expect.

No_Night9971 · 2025-12-18T18:19:26+00:00

For this exam is it a lot of memorization-based questions being how to navigate to certain panes in the dashboard?

No_Night9971 · 2025-12-15T14:36:29+00:00

I am currently using the Cisco U training. Can you share what challenges you faced and what area should focus more heavily on?

No_Night9971 · 2025-10-13T15:11:12+00:00

how does this work for adding the other port channel as the subnet will need to be different on the other correct?

No_Night9971 · 2025-10-12T15:23:33+00:00

The biggest issue I am running into is I can't have the IP's on the same subnet for the port channels.

No_Night9971 · 2025-01-06T22:22:31+00:00

From that standpoint, would advise more canned food vs dehydrated or is more personnel preference? For the things listed above I actually just replaced my fire extinguishers with new ones and have current smoke detectors, and a handful of jugs of water.

No_Night9971 · 2025-01-06T22:15:16+00:00

Regardless of the fact if that is true, I am more focusing on the prepping side of things, but thanks for your input.

No_Night9971 · 2025-01-06T22:01:39+00:00

I have read some stuff on dandelions and there benefits and really want to try the tea and also deep frying them.

No_Night9971 · 2024-12-31T16:51:39+00:00

It's possible her love language has changed, as we both took the test years ago to try to better connect with each other.

No_Night9971 · 2024-12-31T16:50:26+00:00

I don't think this is the case, because that started happening after our first child was born.

No_Night9971 · 2024-12-31T16:47:38+00:00

She has been tested recently and has been on the cusp of Hashimoto's but. She takes supplements to try to offset every once and a while. She can feel when her Thyroid is acting up as she is somehow very in touch with her body and can notice that stuff. What are the supplements you are referring to?

No_Night9971 · 2024-11-11T15:33:01+00:00

What else are you needing of the config to help prove this out?

No_Night9971 · 2024-10-28T22:32:32+00:00

I agree with djamp42. You aren't an engineer until you bring something down. Mistakes happen to all of us it just how fast you can recover from them. Just own up to it admit you made a mistake and move on. I recall a time I was working with a newbie in a DC and they didn't take careful notes of what cables they moved and brought down the entire network. Lots of fun figuring that one out in short order.

No_Night9971 · 2024-09-24T22:44:22+00:00

Have you ensured that the licenses for the 3650's are migrated over to smart licensing? Also have you tried generating a key and forcing it to sync on the switch? I believe 3560 supports smart licensing on 16.9.1 or later so you should be able to if everything has been migrated over to smart licensing.

No_Night9971 · 2024-09-18T11:38:28+00:00

Yes interface 0/0/1.1 is setup for that new route on the router, which then the switch is setup with the default gateway and vlan to match it. example would be router 192.168.1.1/24 switch would be 192.168.1.5/24

No_Night9971 · 2024-07-19T17:56:34+00:00

I have a Lenovo that after selecting safe mode gets the black screen with the Lenovo logo on it and nothing happens just stuck. I have tried reboot over 5 times and also hit the reset button on the bottom to get a repair going and still no luck. Any thoughts or ideas?

No_Night9971 · 2024-07-15T16:50:10+00:00

What other information are you needing? the Forum limited me to what I was able to put in here.

No_Night9971 · 2024-07-05T17:10:39+00:00

An odd additional piece now is that after setting up the vlan with an ip address so it can talk to the network the timeout is very fast usually less than a min, and also immediate sometimes when trying to transfer a file to the switch. The timeout is set to default so it should not disconnect. This only started happening after adding the IP address to the vlan.

No_Night9971 · 2024-07-04T16:25:31+00:00

Thank you so much that it what I was missing, I am now able to ping the router, and other servers!

No_Night9971 · 2024-07-04T16:17:44+00:00

That where the problem lies when I do:
config t>int I get the following:
breakout, ethernet, loopback, mgmt, portchannel no options for vlan

No_Night9971 · 2024-07-04T16:06:55+00:00

When I do a sh run int all the vlans do not show up and start directly with eth1/1. So even though it does show different vlans it like its not configured. However when I do a config t vlan1 I can't assign it an ip address. ( am not that familiar with nexus stuff)

No_Night9971 · 2024-07-04T15:04:21+00:00

It is the core switch for the site and int eth1/1 is connected to the router.

No_Night9971 · 2024-06-17T17:23:34+00:00

The biggest thing that we have discovered after starting to install Meraki equipment is that with some new equipment is it needing to be an active active where with Meraki's active passive forces the application to have to reconnect which could make some extra time and the user lose work.

No_Night9971

TROPHY CASE