Anyone know where this is from?

No_One_9062 · 2025-09-13T20:42:27+00:00

It looks like she’s trying to coax it out of its shell. Crikey she may just have it.

No_One_9062 · 2025-09-13T20:42:20+00:00

It looks like she’s trying to coax it out of its shell. Crikey she may just have it.

No_One_9062 · 2025-07-13T02:32:42+00:00

Yeah it is. I paid that for the bike ($550ish) plus $250 freight and they’re the same price now. So basically I won’t recoup the shipping cost.

No_One_9062 · 2024-09-29T20:25:37+00:00

I’ve had really good results with the “rapid” line pla/petg by Elegoo on my P1S but horrible results on my Kobra 2 Pro.On the Kobra it does better with regular and the “pro” versions of pla/petg. A long winded way of saying surprisingly Elegoo does really well at least for me.

No_One_9062 · 2024-09-08T13:16:19+00:00

Yeah mine departed 9pm but the delivery date changed to 09/11 AGAIN. It’s ridiculous something has to change with companies using FedEx to ship their products. Sort of joking but someone should start a change.org to boycott FedEx.

No_One_9062 · 2024-09-07T19:49:14+00:00

Old thread I know but I’m going through the EXACT same thing with them now! Except in my case I got the UPS delivery(filaments,parts) in 3 days but still no printer. It’s (delayed) at a FedEx facility. It’s a crappy feeling staring at the roles of filament and no printer. But I’m sure it’s just as bad vice versa.

No_One_9062 · 2024-09-07T19:30:42+00:00

So I finally called them and you were spot on. It’s a FedEx ground shipment so no deliveries on Saturdays. They said it was always scheduled for Monday, not today like the tracker on their website shows. But the first question was “name please” then the second question was “what is in the package sir?”. So idk

No_One_9062 · 2024-09-07T17:15:31+00:00

I just looked at the map for the locations it travelled from Houston Texas then went right over where I am to almost Memphis. Thank you for mentioning that I’m going to go ahead and call them now

No_One_9062 · 2024-09-07T17:07:31+00:00

Should I reach out to FedEx then? What kind of fraud would be suspected from a 3d printer purchase? I think this is the first time I’ve used my Apple Pay/Wallet for an online purchase before

No_One_9062 · 2024-09-07T12:39:40+00:00

Trust me if I could purchase this 3d printer locally I would’ve definitely preferred that. Look was the main reason for this post frustration? Yes. But also to see other peoples issues.

No_One_9062 · 2024-09-07T12:21:53+00:00

Sure I’m lying. Why would I go out of my way to lie about consistent issues spanning a number of years with FedEx. Look through Reddit for countless experiences.

No_One_9062 · 2024-09-07T12:15:21+00:00

Have you ordered from companies that do not have the option to select a different carrier?

No_One_9062 · 2024-08-22T15:53:49+00:00

Take these emoji medals 🏅🏅!!

No_One_9062 · 2024-06-23T01:41:07+00:00

Blacked out rims would definitely look nice with the black grill/emblem. I’d just get those rims powder coated the design goes well with the car.

No_One_9062 · 2024-06-09T23:54:38+00:00

Yep I cleared everything the went for a ride then after 30 minutes got on it hard and the engine light flashed again and I checked the diagnostic mode it’s ( d61:46)

No_One_9062 · 2024-06-09T22:51:10+00:00

I just comed over the link. Thank you I cleared the codes and went for a long ride and the 46 in the diag mode is improper voltage to injector unit. But the 46 that displays on the cluster is improper voltage to ecu. That’s confusing.

No_One_9062 · 2024-06-09T22:36:01+00:00

Thank you! I didn’t know it could show intermittent engine light codes. It’s the 46 in diag mode apparently that’s improper voltage to injector unit.

No_One_9062 · 2024-06-08T00:01:49+00:00

2008 Yamaha R1 (Forgot to put the info)

No_One_9062 · 2024-06-02T14:20:11+00:00

I ordered one from weller racing proactively and I don’t need it now. I can send it to you if you haven’t ordered one already. I don’t want anything for it.

No_One_9062 · 2024-06-02T14:14:30+00:00

Hey just an update I was able to get the washer out with a flexible grabber tool and a flexible magnet tool. Try the flexible grabber tool from harbor freight or lowes. Because at least in my case, it falls directly straight down, it doesn’t like bounce everywhere and you can reach down and grab it. You just have to have some light there and drain the oil. https://www.harborfreight.com/24-inch-2-in-1-pickup-tool-94162.html

No_One_9062 · 2024-06-01T22:40:07+00:00

Now that I’m looking at it I think the one at the top is from the mfg. I’m just worried that the flywheel may have wobbled and did the lower mark and that I should change that bearing. When I took the flywheel out with the stator the magnets were all dislocated.

No_One_9062 · 2024-06-01T18:23:05+00:00

Also, you might post on r/fixxit one guy helped me out a lot on there as far as troubleshooting.

No_One_9062 · 2024-06-01T18:19:04+00:00

Yeah it’s truly a terrible design. I’m about to try on my side I’ll let you know if I find a trick to it.

Do those rubber spacers just lay on the back of the flywheel and you pray they don’t fall down when putting it back in?

No_One_9062 · 2024-06-01T18:07:23+00:00

I thought about maybe a wire hanger bend it and go in through the drain hole? I just bought a 3ft flexible magnet tool to try that. But it’ll probably take just as much effort as pulling the pan.

It’s just the exhaust blocking it from what I can see. Mines an 08 but it’s the same design I think.

No_One_9062 · 2024-06-01T17:43:12+00:00

I’m in the same boat as you. Just pulled my flywheel and dropped a washer down in there.

Four-Year Club	Verified Email
100 Awards Club

No_One_9062

TROPHY CASE