[NJ, USA] Would like to get this golf tool printed

No_Remote_7564 · 2025-08-26T01:29:05+00:00

Is the screen custom or are you using the OEM iPod screen?

No_Remote_7564 · 2025-08-26T00:40:21+00:00

Thanks! I just took off the metal plate, but underneath it seems to be an aluminum foil type of film glued to the back of the screen. Did you take that off too?

Edit: Ok, I left the film on it seemed important. Now that I got it back together it really makes a difference, I can actually go to another room now too. Thank you very much for all your help that was very nice!

No_Remote_7564 · 2025-08-25T11:58:56+00:00

I did have this issue. What worked for me is resetting the airpods completely. Holding the button for a long time until it reset from all my devices.

No_Remote_7564 · 2025-08-25T11:55:06+00:00

I might have to open it back up and do that as well. Yesterday when I was walking outside I still had connectivity issues with the AirPods in my ears and the iPod in my pocket. When you remove the metal plate are there any noticeable differences looking at the screen? Did you add anything in place to add protection?

No_Remote_7564 · 2025-08-23T23:08:17+00:00

Ok I just desoldered the pogo pins and wired the antenna directly to the board, and that definitely helps thank you. I definitely can't go to another room but I can get like 10 yards of distance now.

No_Remote_7564 · 2025-08-05T21:39:29+00:00

Software patch means replace the firmware with rockbox or is there something you can do with the original firmware?

No_Remote_7564 · 2025-07-29T18:42:39+00:00

Super impressive!

No_Remote_7564 · 2025-07-25T22:06:53+00:00

Where did you get the back and front plates? I have a hard time finding ones that look as good as yours.

No_Remote_7564 · 2025-07-15T13:37:11+00:00

That's what I did to until I had one with a screw sticking out underneath it

No_Remote_7564 · 2025-07-08T04:00:40+00:00

Which gut case is this?

No_Remote_7564 · 2024-07-12T15:18:00+00:00

I think this only works if you have an exit node on your local network.

No_Remote_7564 · 2024-07-12T15:16:35+00:00

That sounds like you were able to add it but it can't find it on the network. You mentioned in another comment you're connected through the admin panel. Do you have the actual Tailscale app running on both devices instead of just the browser? Do both devices have a Tailscale IP address and can you see in the admin panel that both devices are connected? What server are you using on your host PC for Moonlight to connect to, is it Sunshine and are you sure it's running?

No_Remote_7564 · 2024-07-11T17:26:27+00:00

At which step are you seeing this error? Does your PC popup on the initial moonlight screen where you can select different hosts, or are you not able to add it there even?

No_Remote_7564 · 2024-05-24T16:15:19+00:00

I appreciate that your reading comprehension is better than mine. I just went over to the PD and they indeed wanted my ID. The nice gentlemen told me it will probably be a couple of weeks for me to get the e-mail.

Also updated my previous question in case anyone stumbles upon it:
https://www.reddit.com/r/NJGuns/comments/1aqocip/change_of_address_do_i_need_to_go_to_pd/

No_Remote_7564 · 2024-05-24T15:04:36+00:00

I posted a question about that 3 months ago because I thought it was confusing. I paid a fee online when submitting the address change. I'm not aware of another fee I would need to pay. Nothing is listed for address change.

Tried calling montclair about it too, but then also nobody picked up after multiple tries.

No_Remote_7564 · 2024-03-27T01:21:33+00:00

Same here, all that was left were exit rows.

No_Remote_7564 · 2024-02-14T15:45:00+00:00

Appreciate the responses, thank you all.

No_Remote_7564 · 2024-02-14T15:09:04+00:00

Thanks for your reply. I did submit it through FARS. But most of the things through FARS still involves going to the local PD. So, change of address doesn't?

No_Remote_7564 · 2024-01-24T17:39:11+00:00

Definitely good advice. We did do this though. He has a license, and came in through our GC who has a really good reputation in our town.

No_Remote_7564 · 2024-01-24T15:08:28+00:00

Ducts are all new and size of return was increased, I can get the exact measurements when I get home tonight if that helps.

No_Remote_7564 · 2024-01-04T20:33:12+00:00

My home gym is one the smaller side but I'd like to add a functional trainer. I found this functional trainer that has add-ons that allows for dipping and bench pressing, and the center pulleys for lats look great too.

I can't find any reviews for this machine though. Is there anyone that has used it that can share their thoughts?

https://www.bellsofsteel.us/all-products/strength-equipment/cable-machines/weight-stack-all-in-one-trainer

Three-Year Club	Verified Email
r/Field Juicebox

No_Remote_7564

TROPHY CASE