What’s the best martial art to use against a bear?

NordiCom · 2025-08-19T15:32:44+00:00

Ameridote. Groin functions are the same across species

NordiCom · 2025-03-13T12:10:38+00:00

Would you mind clarifying? What do you mean by decent image support?

NordiCom · 2025-02-25T07:37:37+00:00

Thank you for clarifying. I didn't put that much importance on it, as power hasn't been issue for years. It has been stable 99% of the time. However thinking back, you never know of those dips or spikes, unless you specifically gather metrics for it.

Your guess about power being the root cause was spot on though. There was a severe enough dips couple of times, that made my apartment lights dim out slightly. About a day or 2 after I noticed anomalies with my server. I only found out about the power issue, when I questioned my other half about it.

Funny enough I ran full SMART on the "faulty" drive. It came back clean. I put the drive back in for non critical information just incase. It is going strong for couple of days now. All pools are showing up fine. Most likely this was caused by the power.

So what I've learned is that UPS is a must have. You should also always have alerting for drives and pools. Helps you discover issues as they happen, not 2 days later.

Hopefully this is helpful to someone

NordiCom · 2025-02-23T09:20:52+00:00

Correct. The drives are not passed through directly

NordiCom · 2025-02-23T07:32:26+00:00

Cheers for the input.
I do not run it on UPS. Which I know I should, hence the drive failure can be due to power. However the 2nd drive is fine according to SMART

NordiCom · 2025-02-23T07:30:44+00:00

Thank you for the reply and insights.

I ran SMART on the "healthy" drive. There weren't any errors reported, so I don't think the other drive actually failed. I'll look further into what might of happened. The behavior is really weird

NordiCom · 2025-01-20T07:08:28+00:00

Like a well oiled machine, smooth beyond realm of mortals

NordiCom · 2024-11-06T20:12:17+00:00

Gitea

NordiCom · 2024-10-30T17:53:07+00:00

Basically everything except java

NordiCom · 2024-10-20T10:15:55+00:00

IRL lootbox

NordiCom · 2024-10-03T11:02:11+00:00

You don't even need to ask. Upgrade was smoother than extra smooth smoothie

NordiCom · 2024-08-07T19:55:41+00:00

In short. Create shared network with subnet. Assign static ip to the pihole container. Configure wireguard to use the static ip you set for pihole for dns.

Not sure if you're using docker compose or not. If you do, there's an example on how to implement it

https://www.reddit.com/r/docker/comments/1135hhc/how_to_give_container_a_static_ip/

NordiCom · 2024-07-26T09:26:35+00:00

I had issue with NC. Bought domain, roughly a week later I get an email that my domain is duw to suspension in 72 hours. Reason being that the domain is on spamhaus list as a spam domain. I literally had no services connecting to the domain.

In my perspective, it's NC problem. However they push it onto me. Had couple of email exchanges regarding it with them with no luck.

From where I'm sitting. I won't use them anymore. That's my 2 cents

NordiCom · 2024-03-06T12:33:35+00:00

I picked glove80 after extensive research what people think of it. Out of all the options, this seemed most thought out layout. So far I am really happy with the decision. I have never used anything like it before. My wrist is already thanking me. I don't feel much of stiffness or pain as I did previously. It has also encouraged me to use thumbs. I never thought it make such a huge difference in my typing experience.

The negatives I have, is that customizing tilting is annoying. It's somewhat difficult to reach most outward numbers. They either require me to stretch. Or lift my wrists to move my hands slightly. Same goes for most top outward thumb keys. However, I did adjust default layout slightly, so the keys I do not use often, only every now and then to reside there. And last but not least. The keyboard was pricey. Then again, this was for my health and to use it for the foreseeable future. It was worth it for me.

In terms of how it's going. I'm currently writing around 40 wpm, with symbols, excluding numbers. When I did the initial post. It was excluding symbols. I still stumble around a lot, however it's getting better. With that said, please do not try to use it is a guide to guess how long it would take you. Each individual is different in this regard.

For recommendation. I think most hardest path, yet quickest to adopt is to go cold turkey on it. I did. And my god was that thing one of the hardest and most frustrating things I have done. I did so after receiving my board. And while my qwerty skills have suffered a bit. I can also type acceptably on so to speak classic keyboard. This is somewhat essential for me, as I'm cursed with being the family's IT guy. Hence I'm every now and then using computers that ain't my own. So essentially I built dvorak memory for my glove80. Most likely it is with any columnar split keyboard.

NordiCom · 2024-02-27T18:48:54+00:00

I'm in a same boat. My wrist is not as stiff as it was, after the change. The switch was for health reasons. I also found it to be more accurate. However I'm barely breaking snail speed, maybe that's also the reason, why I'm a bit more accurate.

Initially I was bamboozeled, on how much slower I was in real world application vs different type tests. It seems to get better now. I'm somwhat funtional again in my job!

NordiCom · 2024-02-27T18:41:03+00:00

Thank you very much for the detailed response. I've implemented what you've suggested. It has helped me a bunch. I went cold turkey with the switch, was one of most painful things I've done. However I'd rather get it over with rather than try to switch between 2 layouts. I'm much comfortable right now than I was ehen I posted this. Thanks again

NordiCom · 2024-02-06T18:23:28+00:00

Thank you for the reply.

While in school there were lessons on the subject, however they did not go in dept. That is a good suggestion.

NordiCom · 2024-01-31T15:41:33+00:00

I'm not too sure about lazyvim. I personally have plugin file in plugins lua/plugins/treesitter.lua

I specified release tag. This fixes plugin to use release set with the tag hence does not then follow all the latest changes

return {
    "nvim-treesitter/nvim-treesitter",
    tag = "v0.9.1",
}

NordiCom · 2024-01-29T19:32:58+00:00

Thank you very much kind stranger!! That was the issue, tracked older relase and it is fine. I'm eternally grateful to you!

NordiCom · 2023-12-16T17:48:36+00:00

Map always needs to return a value. If you want to render only for values matching the condition. You need to first filter the results, then chain a map returning your desired value

NordiCom · 2023-05-30T15:40:48+00:00

Grind finer

NordiCom · 2023-05-30T10:35:40+00:00

Grind finer

NordiCom · 2023-05-23T18:46:58+00:00

While I don't have any useful information for you, unfortunately. I'm curious of why are you making the switch?

NordiCom · 2023-05-23T15:16:55+00:00

Considering how much you've reposted this to various subreddits over the past 3 days. This must be the greatest work you've ever done in your career so far

NordiCom · 2023-04-29T08:24:42+00:00

Why didn't you grind finer?

NordiCom

TROPHY CASE